• 한국식물병리학회지
• /
• 제11권3호
• /
• pp.217-223
• /
• 1995

Nature of graft transmissibility of pear abnormal leaf spot disease was examined by various grafting methods in the greenhouse and field. When the diseased and symptomless twigs were collected in winter and grafted in the next spring to the seed-originated healthy root stock, the abnormal leaf spot was developed only in the case of the diseased twigs. Double grafting on a seed-originated healthy root stock, where the diseased and the symptomless twigs were used as 1st and 2nd scions, respectively, developed abnormal leaf spot lesions without exception on the 2nd scions. Tongue-graft with the diseased and the symptomless trees also incited abnormal leaf spots on the both trees. Abnormal leaf spots of were also developed on HN-39, an indicator pear tree, used as a 2nd scion in a double graft test, where the diseased twig and a seed-originated healthy tree were used as the 1st scion and the root stock, respectively. When the diseased twig was top-grafted to the healthy root stock, lesion development of abnormal spot was limited to the grafted twig itself in the 1st year, but expanded to the main branches in the 2nd year, and spread over the whole tree in the 3rd year. This result indicates that the causal agent of abnormal leaf spot disease is transmitted by graft.

• Archives of Plastic Surgery
• /
• 제39권4호
• /
• pp.384-389
• /
• 2012

Background Numerous procedures are available for nipple reconstruction without a single gold standard. This study presents a method for reducing donor-site morbidity in nipple reconstruction using a composite nipple graft after transverse rectus abdominis musculocutaneous flap breast reconstruction. Methods Thirty-five patients who underwent nipple reconstruction using a composite nipple graft technique between July of 2001 and December of 2009 were enrolled in this study. To reduce the donor site morbidity, the superior or superior-medial half dome harvesting technique was applied preserving the lateral cutaneous branch of the fourth intercostal nerves. The patients were asked to complete a previously validated survey to rate the color and projection of both nipples, along with the sensation and contractility of the donor nipple; and whether, in retrospect, they would undergo the procedure again. To compare projection, we performed a retrospective chart review of all the identifiable patients who underwent nipple reconstruction using the modified top hat flap technique by the same surgeon and during the same period. Results Thirty-five patients were identified who underwent nipple reconstruction using a composite nipple graft. Of those, 29 patients (82.9%) responded to the survey. Overall, we received favorable responses to the donor site morbidity. Projection at postoperative 6 months and 1 year was compared with the immediate postoperative results, as well as with the results of nipples reconstructed using the modified top hat flap. Conclusions The technique used to harvest donor tissue is important. Preserving innervation of the nipple while harvesting can reduce donor site morbidity.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.57-63
• /
• 2007

Amphiphilic graft copolymer from poly(vinylidene fluoride) (PVDF) was synthesized using atom transfer radical polymerization (ATRP) for composite nanofiltration membranes. Direct initiation of the secondary fluorinated site of PVDF facilitates grafting of tert-butyl methacrylate (tBMA). Amphiphilic PVDF-g-PMAA graft copolymer with a 51:49 wt ratio was obtained by hydrolyzing poly(tert-butyl methacrylate) (PtBMA) to poly(methacrylic acid) (PMAA). Wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) confirmed the decrease of crystallinity of PVDF upon graft copolymerization. Composite nanofiltration membranes were prepared from PVDF-g-PMAA as a top layer coated onto PVDF ultrafiltration (UF) support membrane. The morphology and hydrophilicity of membranes were characterized using scanning electron microscopy (SEM) and contact angle measurement. The rejections of composite membranes were 80.2% for $Na_2SO_4$ and 28.4% for NaCl, and the solution flux were 9.5 and $14.5\;L/m^2\;h$ at 1.0 MPa pressure.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권3호
• /
• pp.117-122
• /
• 2014

Objectives: The purpose of this study was to evaluate the sinus bone graft resorption over 3 years after two-stage implant placement. Materials and Methods: The subjects for this study included 30 patients whose maxillary posterior ridges were too atrophic for implants. Bone-added osteotome sinus floor elevation was used in 15 maxillary sinuses, while the bone graft by lateral approach technique was used in 25 maxillary sinuses. The height from the top of the fixture to the sinus floor was estimated immediately after implant placement and the follow-up period was over 3 years. The surgery was classified with two groups: sinus bone grafting with and without autogenous bone. All implants were placed simultaneously. Results: The mean vertical bone loss was $3.15{\pm}2.95mm$. The survival rate of implants was 94.7%. Conclusion: The amount of bone resorption was not significantly associated with the surgical methods, the type of bone graft materials used, or sinus perforation during surgery.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.104-108
• /
• 1995

Von Mises stress and compliance distribution was evaluated using a finite element analysis on the anastomosis of an artery with length of 20mm, inner diameter of 4mm, thickness of 0.5mm and a PTFE graft with length of 5.7mm, Inner diameter of 2mm. thickness of 0.2mm. When anastomotic angle was taken as $45^{\circ}$ and inner pressure of $1330\;dyne/mm^2$ was applied inside the 2 conduits. From the analysis results were obtained as follows. (1)Artery diameter increased in both horizontal x and vertical y directions and the magnitude of that in x direction was bigger than in y direction. (2) The compliance was maximum on the anastomosis. especially on that with acute angle. This reduced approaching to the right or left end. (3) The equivalent stress was maximum on top in the y direction and winimum on the nodes around $110^{\circ}$ in circumferential direction from the top. (4) The equivalent stress was maximum in the vicinity of anastomosis with acute angle along the longitudinal direction of the artery. This trend was also observed along the PTFE graft.

• 멤브레인
• /
• 제18권2호
• /
• pp.132-137
• /
• 2008

폴리비닐리덴플로라이드(PVDF) 지지체 위에 빗살모양의 술폰화된 공중합체를 코팅하여 나노 분리막을 제조하였다. 빗살모양의 공중합체는 원자전달 라디칼 중합법(ATRP)에 의해 제조하였으며, 폴리비닐클로라이드의 주사슬과 폴리스티렌 술폰산(PSSA)의 곁사슬로 구성되어 있다. 핵자기 공명법($^1H$-NMR), FT-IR분광학 그리고 WAXS 분석법에 의해 공중합체가 성공적으로 합성되었음을 확인하였다 PVC-g-PSSA로 구성된 복합 나노 분리막은 PSSA의 함량이 증가함에 따라 플럭스와 배제율 모두 증가하였다. 이러한 성능 향상은 분리막의 술폰산의 함량의 증가로써 설명할 수 있다. PSSA가 71wt%첨가된 나노 복합막의 배제율은 $Na_2SO_4$ 88%, NaCl 33%을 나타내었고, 플럭스는 $Na_2SO_4$ 26, NaCl $34L/m^2 h$을 각각 나타내었다.

• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.253-259
• /
• 1997

Von Mises stress and compliance distribution was evaluated using a finite element analysis on the anastomosis of an artery with length of 20mm(z direction, along the horizental artery), inner diameter of 4mm, thickness fo 0.5mm and a PTFE graft with length of 5.7mm, inner diameter of 2mm, thickness of 0.2mm when anastomotic angle was $45^{\circ}$ and inner pressure of 1330 dyne/mm2 was applied inside the 2 conduits. From the analysis results were obtained as follows. (1) Artery diameter increased in both horizontal x(along the length of artery) and vertical y(perpendicular to the length of artery)directions and the magnitude of that in x direction was bigger than that in y direction. (2) The compliance was maximum on the anastomosis, especially on that with acute angle. The reduction of compliance was observed from the anastomosis area to the either right or left end. (3) The equivalent stress was maximum on top in the y direction and minimum on the nodes apart $110^{\circ}$ in circumferential direction from the top. (4) The equivalent stress was maximum in t도 vicinity of anastomosis with acute angle along the longitudinal direction of the artery. This trend was also observed along the PTFE graft.

• Archives of Plastic Surgery
• /
• 제41권2호
• /
• pp.153-157
• /
• 2014

Background The number of citations that a published article has received reflects the importance of the paper in the particular area of practice. In microsurgery, thus far, which journal articles are cited most frequently is unknown. The purpose of this study was to identify and analyze the characteristics of the top 50 papers in the field of microsurgery in the plastic surgery literature. Methods The 50 most cited papers published in high impact plastic surgery and microsurgery journals were identified. The articles were ranked in the order of the number of citations received. These 50 classic papers were analyzed for article type, journal distribution, and geographic and institutional origin. Results Six international journals contributed to the top 50 papers in microsurgery. The most cited paper reported on the early use of the vascularized bone graft and was cited 116 times. The top 50 papers originated from just 10 countries with the United States producing the most. The Preston and Northcote Community Hospital, Melbourne published 5 papers and this was the most productive institution in the top 50. Conclusions These papers represent many important milestones in the relatively short history of microsurgery. Furthermore, our citation analysis provides useful information to budding authors as to what makes a paper attain a "classic" status.

• Korean Chemical Engineering Research
• /
• 제57권3호
• /
• pp.392-399
• /
• 2019

A highly transparent interfacial layer (HTIL) to enhance the performance of dye-sensitized solar cells (DSSCs) was prepared via a polymer-assisted (PA) approach. Poly(vinyl chloride)-graft-poly(oxyethylene methacrylate) (PVC-g-POEM) was synthesized via atom-transfer radical polymerization (ATRP) and was used as a sacrificial template. The PVC-g-POEM graft copolymer induced partial coordination of a hydrophilic titanium isopropoxide (TTIP) sol-gel solution with the POEM domain, resulting in microphase separation, and in turn, the generation of mesopores upon calcination. These phenomena were confirmed using Fourier-transform infrared (FT-IR) spectroscopy, UV-visible light transmittance spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis. The DSSCs incorporating HTIL60/20 (consisting of a top layer with a pore size of 60 nm and a bottom layer with a pore size of 20 nm) exhibited the best overall conversion efficiency (6.36%) among the tested samples, which was 25.9% higher than that of a conventional blocking layer (BL). DSSC was further characterized using the Nyquist plot and incident-photon to electron conversion efficiency (IPCE) spectra.

• 한국연초학회지
• /
• 제4권2호
• /
• pp.11-16
• /
• 1982

To investigate the effect of reciprocal grafting between Hyangchio (H) and L. A. Burley 21 (L.A), one a higher producer of nicotine and low yield, the other, a low producer of nicotine and high yield, growth of various parts of each variety and chemical constituents of these parts were evaluated. The results were as follows : The growth of H/H graft was depressed when compared to hyangchio and H/L. A. and L. A. Burley 21 showed most vigorous growth plants having L. A. Burley 21 top. The amount of total alkaloids were low in leaves and stems of plants having L. A. Burley 21 roots (L. A., L. A./L. A., H/L. A.). Plants having Hyangchio roots (H, L. A./H) were high in total alkaloids. The contents of reducing sugar were high in plant having Hyangchio top compared to L. A. Burley 21 tops, but there were not diffences in contents of ether extracts among all treatments.