• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.355-363
• /
• 1999

The experiments were carried out to elucidate the varietal variation of retrogradation in aged cooked rice and its association with some physicochemical properties of milled rice. The fifteen rice materials were selected from forty-three low-amylose japonica and Tongil-type rice cultivars based on palatability and retrogradation of cooked rice stratified by preliminary sensory evaluation of warm and cooled cooked rice. One japonica glutinous rice variety was included for comparison of retrogradation of cooked rice. The $\alpha$-amylase-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The desirable checking time for evaluating the varietal difference in deterioration of aged cooked rice was four hours after storing in room temperature and two hours after preserving in refrigerator based on the largest coefficients of variations in degree of retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, showed the relatively fast deterioration of cooked rice. The retrogadation index represented by the percentage of retrogradation difference between warm and cooled cooked rice to original estimates of warm cooked rice was significantly affected by the degree of retrogradation of cooled cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogradation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked nce. The varietal difference in retrogradation of cooked rice can be effectively classified by scatter diagram on the plane of upper two principal components based on some retrogradation properties of cooked rice. The deteriorated structural change in cooled cooked rice by observing through the scanning electron microscope was more conspicuous in the fastly retrograded cooked rice than in the slower one.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.288-295
• /
• 1999

Nineteen japonica and Tongil-type rices were selected from seventy nine Korean and Japanese rice cultivars grown in 1989 based on the water uptake behavior of milled rice under the room temperature and boiling conditions. The selected rice cultivars were investigated for water absorbability and some physicochemical characteristics of milled rice, proper water amount for cooking and sensory evaluation of cooked rice. The relationships among the tested grain properties were also examined. The highest varietal variation of water uptake rate was observed at twenty minutes after soaking in water. The maximum water uptake of milled rices at room temperature occurred mostly at about eighty minutes after soaking in water. Newly harvested rices showed a significantly lower water uptake rate of milled rice at 20 minutes after soaking, a relatively higher maximum water absorption ratio under the room temperature, and the less water uptake and volume expansion of boiled rice compared with the one-year old rice samples. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice ansd the palatability of cooked rice. The water/rice ratio(in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was averaged to 2.63(in v/v basis). The water amount needed for optimum cooking was the lowest in Cheongcheongbyeo (Tongil-type rice) and the highest in Jinbubyeo, and the amount could be estimated with about 70% fittness by the multiple regression formula based on some water uptake characteristics, ADV and amylose content of milled rice as the independent variables. Nineteen rice cultivars were classified into seven groups based on scatter diagram projected by principal component analysis using eight properties related to water uptake and gelatinization of milled rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.3
• /
• pp.244-249
• /
• 1992

To investigate the varietal variations in absolute density of milled rice grain and its relations with other grain characters, the 235 rice varieties which consist of 30 Tongil type rices, 72 Japonica rices and 133 Indica rices were tested on grain size, volume, hardness, chalkiness and 1000 grains weight of brown rice, ADV, amylose content, starch composition on SEM and absolute density of milled rice grain using completely ripened grains. Average absolute density of milled rice grain was 1.496g / cm$^3$ in Tongil type rices, 1.506g / em in Japonica rices, and 1.500g / cm$^3$ in Indica rices. It was correlated positively with days to heading and grain hardness, and negatively with chalkiness, volume, grain weight and grain length of brown rice. Regression analysis indicated that grain volume and weight were the major characters affecting the density. However, since the absolute density of milled rice grain did not show great varietal variations it might not seem important as one of the characters contributing to the grain yield, while it could be a factor affecting the grain quality because there were definite varietal differences even though small. The microscopic feature of starch composition on SEM revealed differences between clear and chalky parts of the grain in shape and compactness of starch composition but did not discriminate between high and low-density grains.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.351-359
• /
• 1991

Demand for the rice of better eating quality is ever increasing in recent years. However. the rice is presently handled by the government and merchants as mixture of the rice of different varieties from the purchase of the rough rice to storing and milling. It is well known that the eating quality of rice varies significantly by variety. The present study aimed at evaluation of the effect of blending different rices on the change in palatability of low and high eating quality rices. The eating quality of a low quality japonica rice was improved significantly on sensory panel test by blending it with the Dongjin rice. one of the highest eating quality. only when the Dongjin was blended to 80 percent by weight. and also it was same for blending an ordinary quality rice of mixed varieties which has been stored by a governmental storehouse with a top class rice on free market. The eating quality of aged Tongil type rice. produce of 1987 and 1989 and a mixture of varieties, was improved significantly by blending it with a high quality glutinous rice on market to 20 per cent by weight. But Samgang rice. a high eating quality Tongil type variety. and an ordinary quality rice of Japonica varieties were not significantly improved by blending them with the glutinous rice by 20 per cent. Blending rices of the variety Nagdong. ordinary quality among varieties and low quality among Japonicas, Chucheong, a high quality rice among Japonicas. and Dongjin. one of the best eating quality rice among Japonicas, each other in different ratios did not affect significantly the sensory scores.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.271-279
• /
• 1991

The changes in fat acidity of brown rice and eating quality of rice during long term grain storage of unhulled rice were evaluated for the government managed rices. The Tongil type rice grains had consistently significantly lower fat acidity during three and half year storage than the Japonica type rice. On sensory evaluation of the fresh milled cooked rice the eating quality of the long term stored rices, 1987, 1988, and 1989 produce Tongil did not differ much each other even though increase in fat acidity by year of storage. The Japonica rices produced in 1989 and 1990 in different locations and stored there also did not differ much in eating quality. The grains stored in storehouses of super grade did not differ significantly from those stored in the first grades, but the grains stored (4 $^{\circ}C$, RH 50%) grains have kept the eating quality almost same as the fresh grains even after two and half years. A higher degree of milling did not improve significantly the sensory taste of cooked rice of the grains long term stored.

• Molecules and Cells
• /
• v.25 no.3
• /
• pp.417-427
• /
• 2008

Comparison of maps and QTLs between populations may provide us with a better understanding of molecular maps and the inheritance of traits. We developed and used two reciprocal $BC_1F_1$ populations, IP/DS//IP and IP/DS//DS, for QTL analysis. DS (Dasanbyeo) is a Korean tongil-type cultivar (derived from an indica x japonica cross and similar to indica in its genetic make-up) and IP (Ilpumbyeo) is a Korean japonica cultivar. We constructed two molecular linkage maps corresponding to each backcross population using 196 markers for each map. The length of each chromosome was longer in the IP/DS//IP population than in the IP/DS//DS population, indicating that more recombinants were produced in the IP/DS//IP population. Distorted segregation was observed for 44 and 19 marker loci for the IP/DS//IP and IP/DS//DS populations, respectively; these were mostly skewed in favor of the indica alleles. A total of 36 main effect QTLs (M-QTLs) and 15 digenic epistatic interactions (E-QTLs) were detected for the seven traits investigated. The phenotypic variation explained (PVE) by M-QTLs ranged from 3.4% to 88.2%. Total PVE of the M-QTLs for each trait was significantly higher than that of the E-QTLs. The total number of M-QTLs identified in the IP/DS//IP population was higher than in the IP/DS//DS population. However, the total PVE by the M-QTLs and E-QTLs together for each trait was similar in the two populations, suggesting that the two $BC_1F_1$ populations are equally useful for QTL analysis. Maps and QTLs in the two populations were compared. Eleven new QTLs were identified for SN, SF, GL, and GW in this study, and they will be valuable in marker-assisted selection, particularly for improving grain traits in tongil-type varieties.

• Weed & Turfgrass Science
• /
• v.3 no.3
• /
• pp.225-231
• /
• 2014

Benzobicyclon induces phytotoxicity to Tongil type rice, although it is an efficient herbicide in paddy. This study was performed to figure out the benzobicyclon-induced phytotoxicity responses of whole crop forage rice genotypes that have the genetic background similar to Tongil type rice, under wet-seeded and transplanted conditions. Mogwoo demonstrated whitening symptom at all the temperatures in both wet-seeding and transplanting by the application of standard and double rates of benzobicyclon. Nokyang, Mogyang and Suweon560 exhibited no or negligible whitening and their plant heights were not reduced at standard rate of benzobicyclon. But in double rate application in wet-seeding, the three genotypes showed 0-8% of white plants at all temperature treatments and reduction in plant height was comparatively larger at $27^{\circ}C$. In transplanting, the double rate application of benzobicyclon at 24 and $27^{\circ}C$ induced 0-32% of whitening plants depending on genotypes while no whitening plants were observed at 18 and $21^{\circ}C$ in all genotypes. Reduction in biomass by double rate of benzobicyclon at 24 and $27^{\circ}C$ was greater than at 18 and $21^{\circ}C$. It is concluded that Mogwoo is extremely sensitive to benzobicyclon and Nokyang, Mogyang and Suweon560 are tolerant to the standard rate of benzobicyclon.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.10-24
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.9-9
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.183-192
• /
• 1982

The variability of rice productivity during last 2 decades (1961-1980) of ten years before and after the introduction of"Tongil" was reviewed from the epochal, regional and varietal points of view. During that period the cultivated area of paddy rice have remained almost unchanged, while the total rice production have got elevated from 3, 463 million metric tons in 1961 to 6.006 million metric tons in 1977, recording 73.4% increase. This remarkable increase in rice production is considered to be attributable much to the development and release of new high yielding variety, "Tongil", coupled with the amelioration of cultural techniques. However, in 1978 Tongil type varieties experienced the epidemic outbreak of blast disease due to the shifted race population of blast fungus and in 1980 recorded poor rice production as low as in 1960's due to the unfavorable weather stress throughout the rice growing season, giving rise to many problems awaiting solutions for securing the stabilized high production of rice. The rice yield has continued the gradual increase during last two decades but its difference between farmer and research organization have got wider from 79kg/10a during 1960 to 1971 to 101kg/l0a during 1972 to 1980, and also the inter-regional differences have been increased from 50-60kg/10a to 80kg/10a during those periods. Therefore, this proves that we have raised the upper boundary of rice yield by increasing the yield potential of rice variety but have not changed those absolute deviations. Estimates indicate that the increased rice production during that period was indebted 40 percent to the varietal improvement and 13 percent to the ameliorated agro-technologies, and the rest, 47 percent, could be ascribed to the other factors besides varieties and cultural technologies such as the improved agricultural environments, etc. Of course, even though it cannot be expected to unify the cultural environments and the cultural technologies, provided that much efforts are to be endeavored to minimize the yield difference of 20 percent between farmer and research organizations and the inter-regional yield difference of 20 percent, much increased rice production can be expected to be achieved with the current level of cultural technology and the yielding potential of the present rice varieties. In order to expedite the above effects on rice production the followings are to be put into practices consitently and steadfastly. 1. Reinforcement of breeding for varieties with high yielding potential and less susceptible to climatic-stress and pests, and of basic physicoecological studies of rice plant for improving the cultural technologies. 2. Continuous endeavor to secure the stabilized cultural environments by improving the soil fertility and increasing the drainage and irrigation facilities. 3. Political back-up to encourage the farmers' incentives for production 4. Precise surveys for agricultural statistics to facilitate the long-term planninge long-term planning.