• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.903-912
• /
• 2009

This study is focused on simulation-based dimensional tolerance optimization process (DTOP) to minimize vehicle pulls by reduction of dimensional variation in front suspension system. In previous studies, the effect of tires and wheel alignment sensitivity have mainly been investigated to eliminate vehicle pulls in nominal design condition without allocating optimal tolerance level for selected components, among various factors regarding vehicle pulls such as vehicle design parameters, vehicle weight balance, tires, and environmental factors. Unfortunately, there are wide variations in the real vehicle, and these have impacted actual vehicle pulls, especially wheel alignment effects from suspension geometry variation has not been considered in the previous studies. In the tolerance design of suspension, tolerance variables with the uncertainty such as parts dimensional variation, assembly process, datum position and direction, and assembly tool tolerance has a great influence on the variation of the suspension dimensional performances. This study introduces total vehicle pull prediction model in considering major key factors for vehicle pull sensitivity. The Monte Carlo-based tolerance analysis model using Taguchi robust method is developed to optimize dimensional tolerance parameters, satisfying on the target variation level.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.51-58
• /
• 2004

This paper proposes a new artificial immune approach to on-line hardware test which is the most indispensable technique for fault tolerant hardware. A novel algorithm of generating tolerance conditions is suggested based on the principle of the antibody diversity. Tolerance conditions in artificial immune system correspond to the antibody in biological immune system. In addition, antigen presenting cell (APC) is realized by Quine-McCluskey method in this algorithm and tolerance conditions are generated through GA (Genetic Algorithm). The suggested method is applied to the on-line monitoring of a typical FSM (a decade counter) and its effectiveness is demonstrated by the computer simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.524-530
• /
• 2011

This paper analyzes fault tolerance under a stator turn fault, according to the winding configuration. Improvement of torque characteristics and fault tolerance can be achieved by winding configuration without additional methods. And, torque characteristics and fault tolerance according to the winding configuration can be usually analyzed by analytical method. But, when the stator turn fault generates, compare to the steady-state, analysis of torque characteristics and fault tolerance using the analytical method is not accurate because it does not reflect influence in mutual inductance and magnetic non-linearity. Therefore, analysis of torque characteristics and fault tolerance has to be performed by using the numerical method under fault condition. This paper develops fault characteristics according to the winding configuration using the FEM-base model considered magnetic non-linearity. And, this paper suggests fault tolerance improvement according to the winding configuration, by the comparison of 8/12 and 10/12 models, under fault condition.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.4
• /
• pp.135-142
• /
• 2020

The new method for evaluating the displacement tolerance of sky-bridges with pin-roller type supports was proposed considering both return period of phase difference between connected buildings and geometrical characteristics of skybridge. Because displacement tolerance is relative value, which is most affected by the phase difference of the connected buildings, the dynamic response of these building with time history analysis should be evaluated. However, the initial phase could not be specified, so the result of displacement tolerance would be varied with respect to initial value. Thus, the tolerance can be reasonably evaluated SRSS calculation with design displacements based on statistical approach and of each building. In addition, the geometrical characteristics of sky-bridge should be considered because the transverse displacement of sky-bridge span causes the shear deformation of the bridge and longitudinal displacement tolerance cannot release the shear deformation. Therefore, the some pin-end support in sky-bridge should have longitudinal displacement tolerance to accommodate the shear deformation. By resolving this shear deformation, it is possible not only to accommodate transverse displacement, but also to avoid the complicated joint details such as both pot bearing and guided supports with shear key.

• Clinical and Experimental Reproductive Medicine
• /
• v.48 no.2
• /
• pp.156-162
• /
• 2021

Objective: The aim of the present study was to evaluate the predictive capability of fasting-state measurements of glucose and insulin levels alone for abnormal glucose tolerance in women with polycystic ovary syndrome (PCOS). Methods: In total, 153 Korean women with PCOS were included in this study. The correlations between the 2-hour postload glucose (2-hr PG) level during the 75-g oral glucose tolerance test (OGTT) and other parameters were evaluated using Pearson correlation coefficients and linear regression analysis. The predictive accuracy of fasting glucose and insulin levels and other fasting-state indices for assessing insulin sensitivity derived from glucose and insulin levels for abnormal glucose tolerance was evaluated using receiver operating characteristic (ROC) curve analysis. Results: Significant correlations were observed between the 2-hr PG level and most fasting-state parameters in women with PCOS. However, the area under the ROC curve values for each fasting-state parameter for predicting abnormal glucose tolerance were all between 0.5 and 0.7 in the study participants, which falls into the "less accurate" category for prediction. Conclusion: Fasting-state measurements of glucose and insulin alone are not enough to predict abnormal glucose tolerance in women with PCOS. A standard OGTT is needed to screen for impaired glucose tolerance and type 2 diabetes mellitus in women with PCOS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.1
• /
• pp.59-70
• /
• 2000

In nature, plant diseases, insects and parasites (hereafter called as "pest") must be co-survived. The most common expression of co-survival of a host crop to the pest can be tolerance. With tolerance, chemical uses can be minimized and it protects environment and sustains host productivity and the minimum pest survival. Tolerance can be applicable in all living organisms including crop plants, lifestocks and even human beings. Tolerant system controls pest about 90 to 95% (this pest control system often be called as horizontal or partial resistance), while the use of chemicals or selection of high resistance controls pest 100% (the most expression of this control system is vertical resistance or true resistance). Controlling or eliminating the pests by either chemicals or vertical resistance create new problems in nature and destroy the co-survial balance of pest and host. Controlling pests through tolerance can only permit co-survive of pests and hosts. Tolerance is durable and environmentally-friend. Crop cultivars based on tolerance system are different from those developed by genetically modified organism (GMO) system. The former stabilizes genetic balance of a pest and a host crop in nature while the latter destabilizes the genetic balance due to 100% control. For three decades, the author has implemented the tolerance system in breeding maize cultivars against various pests in both tropical and temperate environments. Parasitic weed Striga species known as the greatest biological problem in agriculture has even been controlled through this system. The final effect of the tolerance can be an integrated genetic pest management (IGPM) without any chemical uses and it makes co-survival of pests in nature.in nature.

• Biomolecules & Therapeutics
• /
• v.25 no.3
• /
• pp.239-248
• /
• 2017

Desensitization and acute tolerance are terms used to describe the attenuation of receptor responsiveness by prolonged or intermittent exposure to an agonist. Unlike desensitization of G protein-coupled receptors (GPCRs), which is commonly explained by steric hindrance caused by the ${\beta}$-arrestins that are translocated to the activated receptors, molecular mechanisms involved in the acute tolerance of GPCRs remain unclear. Our studies with several GPCRs and related mutants showed that the acute tolerance of GPCRs could occur independently of agonist-induced ${\beta}$-arrestin translocation. A series of co-immunoprecipitation experiments revealed a correlation between receptor tolerance and interactions among receptors, ${\beta}$-arrestin2, and $G{\beta}{\gamma}$. $G{\beta}{\gamma}$ displayed a stable interaction with receptors and ${\beta}$-arrestin2 in cells expressing GPCRs that were prone to undergo tolerance compared to the GPCRs that were resistant to acute tolerance. Strengthening the interaction between $G{\beta}{\gamma}$ and ${\beta}$-arrestin rendered the GPCRs to acquire the tendency of acute tolerance. Overall, stable interaction between the receptor and $G{\beta}{\gamma}$ complex is required for the formation of a complex with ${\beta}$-arrestin, and determines the potential of a particular GPCR to undergo acute tolerance. Rather than turning off the signal, ${\beta}$-arrestins seem to contribute on continuous signaling when they are in the context of complex with receptor and $G{\beta}{\gamma}$.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.557-563
• /
• 2001

Oral tolerance is thought to play a role in preventing allergic responses and immune-mediated diseases. An improved mouse model of the oral tolerance to Japanese cedar pollen (JCP) as antigen was developed in order to detect induction of the tolerance, and the immunological characteristics of this model were also elucidated. Oral tolerance was induced by C3H/ HeN mice given an oral administration of 10 mg JCP 7 days before immunization with an i.p. injection of 0.1 mg JCP in complete Freunds adjuvant (CFA). The effects of oral JCP on systemic immunity were assessed by enzyme-linked immunosorbent assay (ELISA) of immunoglobulin (Ig) levels in serum collected on day 7 or 14 after immunization. Oral tolerance to JCP was adequately induced on day 7 after immunization and was more effective in C3H/HeN mice than in BALB/c mice. The tolerance was primarily concerned with the decreased serum levels of antigen-specific IgG. In these mice, oral administration of JCP also suppressed various immune responses to the antigen including delayed-type hypersensitivity (DTH), total Igl level and anti-JCP IgGl level. The suppression of these immune responses by the oral antigen was associated with a significant reduction in interleukin-4 (IL-4) production. These findings therefore indicate that this C3H/HeN mice model has potential use in detecting the induction of oral tolerance by JCP and suggest that this tolerance model may be effective in the treatment and prevention of allergic responses caused by the antigen.

• The Korean Journal of Pain
• /
• v.37 no.3
• /
• pp.233-246
• /
• 2024

Background: Ferrostatin-1 and liproxstatin-1, both ferroptosis inhibitors, protect cells. Liproxstatin-1 decreases morphine tolerance. Yet, ferrostatin-1's effect on morphine tolerance remains unexplored. This study aimed to evaluate the influence of ferrostatin-1 on the advancement of morphine tolerance and understand the underlying mechanisms in male rats. Methods: This experiment involved 36 adult male Wistar albino rats with an average weight ranging from 220 to 260 g. These rats were categorized into six groups: Control, single dose ferrostatin-1, single dose morphine, single dose ferrostatin-1 + morphine, morphine tolerance (twice daily for five days), and ferrostatin-1 + morphine tolerance (twice daily for five days). The antinociceptive action was evaluated using both the hot plate and tail-flick tests. After completing the analgesic tests, tissue samples were gathered from the dorsal root ganglia (DRG) for subsequent analysis. The levels of glutathione, glutathione peroxidase 4 (GPX4), and nuclear factor erythroid 2-related factor 2 (Nrf2), along with the measurements of total oxidant status (TOS) and total antioxidant status (TAS), were assessed in the tissues of the DRG. Results: After tolerance development, the administration of ferrostatin-1 resulted in a significant decrease in morphine tolerance (P < 0.001). Additionally, ferrostatin-1 treatment led to elevated levels of glutathione, GPX4, Nrf2, and TOS (P < 0.001), while simultaneously causing a decrease in TAS levels (P < 0.001). Conclusions: The study found that ferrostatin-1 can reduce morphine tolerance by suppressing ferroptosis and reducing oxidative stress in DRG neurons, suggesting it as a potential therapy for preventing morphine tolerance.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.175-183
• /
• 1998

When a product is designed, tolerances must be given to the product so that required functions are guaranteed and production costs are minimized. In this research, a model is suggested which allocates tolerances to components optimally according to the STA(Statistical Tolerance Allocation) method. Taking into account the concept that dimensional errors have characteristics of statistical distributions, this model presents the discrete pseudo-boolean approach for the tolerance optimization by minimizing the tolerance cost and the quality loss cost. In this approach, two methods are proposed for the reduction of the problem scale; 1) a method for converting the minimization model for casts into the maximization model for cost savings, and 2) procedures to reduce the number of constraints and variables.