• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.379-385
• /
• 2005

This study was conducted to find out a useful bioremediation technology for heavy metal contaminated soil and water. We isolated strain CPB from heavy metal contaminated soil and evaluated the tolerance level and adsorption capacity of strain CPB to heavy metals (Strain is not determined yet). Strain CPB showed variable tolerance limit to different kinds heavy metal or concentrations of heavy metals. The growth of strain CPB was significantly inhibited by mixed heavy metals (Cd+Cu+Pb+Zn) than that of by single heavy metal. Strain CPB showed high binding capacity with Pb (Pb>Cd>Cu>Zn). In general, strain CPB showed high uptake of heavy metals such as Pb, Cd and Cu. It was observed that the capacity of heavy metal uptake from mixture of heavy metals was reduced in comparison with single heavy metal treatment. But total contents of heavy metal bound with cell in mixed heavy metal showed higher than in single heavy metal treatment. Heavy metal adsorption in cells was affected by several external factors, such as temperature and pH etc.. The optimum temperature and pH of the adsorption of heavy metal into cells were ca. $25{\sim}35^{\circ}C$ and pH ca. $5{\sim}7$, respectively. A large number of the electron dense particles were found mainly on the cell wall and cell membrane fractions, which was determined by transmission electron microscope. Energy dispersive X-ray spectroscopy revealed that the electron dense particles were the heavy metal complexes the substances binding with heavy metals.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.1
• /
• pp.28-34
• /
• 1999

This study was carried out to assess heavy metal pollution at 16 abandoned mining areas and to get basic data for phytoremediation. In most of surveyed area, there was no vegetation cover and soil reaction shows in low to moderate pH. Low CEC, low organic matter content were the general properties of these soils. Heavy metals content of these soils were exceed background level of unpolluted soil in Korea, especially Cu content was 2,634mg/kg at Jeil site, 3,415mg/kg Zn, 8.03mg/kg Cd at Yonhwa 2 site. This is far above tolerance limit In plant survey, very often observed plants were Pinus densiflora, and Rohinia psuedo-acacia in woody plant, Artemisia princeps, and Dianthus sinensis in herbs. Artemisia princeps had higher concentration of Zn, Cd and Dianthus sinensis had higher concentration than other plants. From the results, heavy metal concentration in plants and plant's ecotype properties, could be said that Artemisia princeps and Miscanthus sinensis have a potential of soil remediation plant. More studies are demanded to find the heavy metal tolerance species and to understand physiology property of tolerance plants, soil condition, climate etc., for successful soil remediation by plants.

• Journal of Environmental Science International
• /
• v.33 no.4
• /
• pp.257-268
• /
• 2024

This study investigated the growth characteristics of Euonymus japonicus, Hedera helix, and Peperomia puteolata treated with different calcium chloride (CaCl₂) concentrations to evaluate salt tolerance limits in hydroculture cultivation. Six concentrations of CaCl₂ (0, 1, 2, 5, 10, and 15 g·L^-1 referred to as Cont., C1, C2, C5, C10, and C15) were applied to solution - grown plant species. The survival rate, growth index, plant height, plant width, leaf width, leaf length, number of leaves, and relative chlorophyll contents were measured at monthly intervals. Euonymus japonicus, Hedera helix, and Peperomia puteolata survived up to C2, C5, and C10 at each CaCl₂ concentration. The Euonymus japonicus was higher in the C1 treatment than in the Cont. for most growth characteristics. Hedera helix had the highest leaf width, leaf length, and number of leaves in the Cont., a significant difference was observed compared with the C1 treatment. The chlorophyll content did not differ significantly between the C5 and Cont. treatments. The leaf width and length of Peperomia puteolata were greater in the C2 and C1 treatments than in the Cont., whereas the number of leaves and chlorophyll content were the highest in C5. Dry weight analysis revealed that Euonymus japonicus, Hedera helix, and Peperomia puteolata were the lowest in the Cont. treatments. Euonymus japonicus was 74% in C15, and Hedera helix, and Peperomia puteolata were analyzed at approximately 37%- 50% and 9%-14%, respectively, regardless of the concentration in the CaCl₂ treatment groups. In indoor hydroponic cultivation, the salt tolerance limit concentrations of Euonymus japonicus, Hedera helix, and Peperomia puteolata are 2, 5, and 10 g·L^-1, respectively, indicating that hydroculture management techniques should be applied at higher concentrations.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.190-197
• /
• 2004

In order to consider statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. Also, the real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. In this paper, we estimated the probability of failure of the pressure vessel. And also, this paper presents sensitivity values of the random variable. Finally, we show that reliability index and probability of failure can present the tolerance limit of dimension of randam variables.

• Journal of Korean Society for Quality Management
• /
• v.35 no.4
• /
• pp.147-158
• /
• 2007

Owing to the rapid growth in automated manufacturing systems, screening inspection becomes an attractive practice for removing nonconforming items, and it has been suggested that inspection will essentially become an inherent part of modem manufacturing processes. In this paper, we propose rectifying screening inspections which allow quality practitioners to use performance and surrogate variables interchangeably in real-time applications. Two screening inspections are considered; a statistically-based screening inspection to reduce the current proportion of nonconforming items to a specified AOQ(average outgoing quality) after screening, and an economically-based screening inspection where the tolerance limit is determined so that the expected total cost is minimized. It is assumed that the performance variable and the surrogate variable are jointly normally distributed. For two screening inspections, methods of finding the optimal solutions are presented and numerical examples are also given.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1093-1101
• /
• 2002

Continuous fiber ceramic composites (CFCCs) have advantages over monolithic ceramics : Silicon Nitride composites are not well used for application because of their low fracture toughness and fracture strength, but CFCCs exhibit increased toughness for damage tolerance, and relatively high stiffness in spite of low specific weight. Thus it is important to characterize the fracture resistance and properties of new CFCCs materials. Tensile and flexural tests were carried out for mechanical properties and the fracture resistance behavior of a SCS6 fiber reinforced Si$_3$N$_4$ matrix CFCC was evaluated. The results indicated that CFCC composite exhibit a rising R curve behavior in flexural test. The fracture toughness was about 4.8 MPa$.$m$\^$1/2 , which resulted in a higher value of the fracture toughness because of fiber bridging. Mechanical properties as like the elastic modulus, proportional limit and the ultimate strength in a flexural test are greater than those in a tensile test. Also a numerical modeling of failure process was accomplished for a flexural test. This numerical results provided a good simulation of the cumulative fracture process of the fiber and matrix in CFCCs.

• Ocean and Polar Research
• /
• v.23 no.4
• /
• pp.401-410
• /
• 2001

Global climate change will alter many such properties of the Southern Ocean as temperature, circulation, stratification, and sea-ice extent. Such changes are likely to influence the species composition and activity of Antarctic marine microorganisms (protists and bacteria) which playa major role in deter-mining the concentration of atmospheric $CO_2$ and producing precursors of cloud condensation nuclei. Direct impacts of climate change on Antarctic marine microorganisms have been determined for very few species. Increasing water temperature would be expected to result in a southward spread of pelagic cyanobacteria, coccolithophorids and others. Growth rates of many species would be expected to increase slightly but nutrient limitation, especially micronutrients, is likely to result in a negligible increase in biomass. The extent of habitats would be reduced for those organisms presently living close to the upper limit of their thermal tolerance. Increased UVB irradiance is likely to favour the growth of those organisms tolerant of UVB and may change the trophic structure of marine communities. Indirect effects, especially those as a consequence of a diminution of the amount of sea-ice and increased upper ocean stratification, are predicted to lead to a change in species composition and impacts on both trophodynamics and vertical carbon flux.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.115-120
• /
• 1998

This Study was performed to investigate the contents of aflatoxin $B_{1}$ in cereal, pulse, nuts and these products of domestic and import. These results were as follows. 1. Average concentration(in ${\mu}g/kg$) of aflatoxin $B_{1}$ in domestic foods were 2.6 in cereal, 3.9 in pulse, 4.2 in nuts and 1.4 grain products. The contents of aflatoxin B$_{1}$ in pulse and nuts were much higher than those of cereal and grain products. But their values were still within $10{\mu}g/kg$ the maximum residual level of aflatoxin $B_{1}$ for food of Korea. 2. Average contents of aflatoxin $B_{1}$ in import foods were 4.8, 5.4, 6.0, $3.8{\mu}g/kg$ for cereal pulse , nuts and popcorn & peanuts butter, respectively. And these values were found to be below the maximum residual level ($10{\mu}g/kg$) of aflatoxin $B_{1}$ for food of Korea. 3. The concentration of aflatoxin $B_{1}$ in 2 samples of domestic and 9 samples of import foods were over the tolerance limit for aflatoxin $B_{1}$ in food of Korea. Therefore, the hygienic managements of the foods should be required during storage and circulation at market.

• Korean journal of applied entomology
• /
• v.19 no.1 s.42
• /
• pp.31-34
• /
• 1980

In pot experiment, relations between soybean cyst nematode, Heterodera glycines, and growth and yield of soybean were followed. Soybean growth and nodule development in plots which inoculated more than 16 cysts were reduced greatly from two month after inoculation. Tolerance limit was about 20 cysts per 500g of soil at seeding period. There was $60\%$ loss of grain yield 낀hen nematode population was 1 cyst/g of soil at seeding period. Reproduction of soybean cyst :nematode was good when initial population had been low. So, the final population was no difference depend on inoculation density.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.784-789
• /
• 2001

In order to investigate the fracture behaviors(penetration modes) and the resistance to penetration during ballistic impact of cold-rolled Al 5052 H34 alloy laminates, anodized Al 5052 H34 alloy laminates, and Al 5052 H34 alloy after cold-rolling, ballistic testing was conducted. In general, superior armor material is brittle materials which have a high hardness. Ballistic resistance of these materials was measured by protection ballistic limit(V50), a statical velocity with 50% probability for incomplete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed respectfully, resulting from V50 test and Projectile Through Plate(PTP) test at velocities greater than V50. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature using 5.56mm ball projectile. V50 tests with 0$^{\circ}$obliquity at room temperature were also conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Surface Hardness, resistance to penetration, and penetration modes of Al 5052 H34 alloy laminates compared to those of cold-rolled Al 5052 H34 alloy laminates and anodized Al 5052 H34 alloy laminates anodized Al 5052 H34 alloy after cold-rolling.