• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.135-140
• /
• 2004

To evaluate utilization of tobacco dust as a raw material of reconstituted tobacco, tobacco dust was applied to the paper-making reconstituted tobacco process and we examined the chemical and physical properties of the reconstituted tobacco and raw materials. The use of tobacco dust in the manufacture of reconstituted tobacco had no measurable adverse effects on the chemical properties of the reconstituted tobacco when added to the reconstituted tobacco formula at levels of $3\%,\;5\%,\;7\%\;and\;10\%$ instead of foreign bright stem. Filling power and fragibility index of the reconstituted tobacco was slightly decreased with increasing tobacco dust levels, but it was not significant change. However, when the level of $10\%$ tobacco dust was added to the reconstituted tobacco formula, the tensile index based basis weight was rapidly decreased.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.126-134
• /
• 2004

Tobacco dust samples were collected for two times in primary and secondary process at 4 cigarette manufacturing factories(Shintanzin, Youngju, Wonju, Kwangju) and analyzed to evaluate usage as a raw material in production of reconstituted tobacco. The chemical constituents and HWS of tobacco dust were analyzed. Tobacco dust samples were partitioned by particle size using a series of screens ranging from 20 to 200 mesh. The amount of material retained in each fraction was quantified and sand content was also determined. Appreciable average amounts$(40-65\%)$ material at 4 locations were found to be larger than 60 mesh. Although the amount of material in each fraction increased to a maximum at 100 mesh and then decreased, the $\%$ sand continually increased with decreasing particle size. The chemical constituents and HWS content of tobacco dust have similar values in secondary process of 4 cigarette manufacturing factories but the those of primary process have different values according to the site of occurrence and manufacturing factories.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2015

4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), a tobacco specific nitrosamine found only in tobacco products. The ability to monitor biomarker concentrations is very important in understanding environmental tobacco smoke (ETS). In this study, an efficient and sensitive method for the analysis of NNK in dust was developed and validated using liquid chromatography tandem mass spectrometry. Dust was collected with filter paper soaked in methanol. The standard solution and dust sample were diluted with 100 mM ammonium acetate and extracted using dichloromethane. Our calibration curves ranged from 25 to $10^4pg/mL$. Excellent linearity was obtained with correlation coefficient values between 0.9996 and 1.0000. The limit of detection (LOD) was 5 pg/mL ($S/N{\geq}3$) and the retention time was 10 min. The limit of quantification (LOQ) was 25 pg/mL, and the acceptance criteria was the rate of 98-103% (80-120% at levels up to $3{\times}LOQ$). The coefficient of variations (CV) was 2.8%. Accuracies determined from dust samples spiked with four different levels of NNK racurves ranged that from 25 to 104 pg/mL. Excellent linearity was obtained between 92.1% and 114%. The precision of the method was acceptable (5% of CV). The recovery rates of the whole analytical procedure at low, medium, and high levels were 105.7-116.5% for NNK. The carry-over effects during LC-MS/MS analysis were not observed for NNK. This manuscript summarizes the scientific evidence on the use of markers to measure ETS.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.43-49
• /
• 2003

ETS concentrations in the PC game rooms and factors affecting ETS concentrations were measured. Nicotine, 3-EP, respirable dust and UVPM were used as tracers for ETS. ETS concentrations are 2-3 times higher than those of other results. The concentration of ETS at the commercial district was higher than that of the residential district. The correlations between these tracers and SD/ ACH, a factor affecting to ETS concentration, were calculated. The correlation between 3-ethenylpyridine among tracers and SD/ACH was highest. The correlation between respirable dust and SD/ ACH was lowest. It was difficult to recommend respirable dust as a tracer of ETS.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.398-409
• /
• 2020

Objectives: This study aimed to evaluate environmental exposure to tobacco-specific nitrosamines (TSNAs) by conducting an analysis of the concentration of TSNAs in deposited dust collected from a fertilizer plant and the surrounding village, a simulation of high-temperature drying of tobacco waste, and CALPUFF modeling. Methods: The raw materials of the products, deposited dust (inside and outside the plant and residential area), soil, and wastewater were sampled and the TSNA concentrations were analyzed by LC-MS/MS. As the plant was closed down before the investigation, simulation tests were conducted to confirm the substances discharged during high-temperature (300℃) drying of tobacco waste. CALPUFF modeling was performed to identify the area of influence due to exposure to TSNAs. Results: TSNAs were detected in organic fertilizers estimated to contain tobacco waste, deposited dust, and soil collected from inside and outside the plant. N'-nitrosonornicotine (NNN), 4-(methylnitrosoamino)-1-(3-pyridyl)-1-butanone (NNK), and N'-nitrosoanatabine (NAT) components were detected in five of 15 deposited dust samples collected from the residential area around the plant, while TSNAs were not detected in the five sampling points in the control area. Also, the simulation test for the high temperature drying of tobacco waste found emissions of TSNAs. The CALPUFF modeling results showed that the survey area was likely to be included in the area of influence of TSNA emissions from the plant. Conclusions: It is estimated that harmful tobacco ingredients such as TSNAs were dispersed in nearby areas due to the illegal use of tobacco waste as a raw material to produce organic fertilizers at the plant. These findings assume that the residents have been exposed to TSNAs and suggest that the need for the establishment of measures to manage environmental health.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.33-41
• /
• 2024

Background: Dust generated during the processing of building materials enterprises can pose a serious health risk. The study aimed to compare and analyze the results of ART and the Monte Carlo model for the dust exposure assessment in building materials enterprises, to derive the application scope of the two models. Methods: First, ART and the Monte Carlo model were used to assess the exposure to dust in each of the 15 building materials enterprises. Then, a comparative analysis of the exposure assessment results was conducted. Finally, the model factors were analyzed using correlation analysis and the scope of application of the models was determined. Results: The results show that ART is mainly influenced by four factors, namely, localized controls, segregation, dispersion, surface contamination, and fugitive emissions, and applies to scenarios where the workplace information of the building materials enterprises is specific and the average dust concentration is greater than or equal to 1.5 mg/m³. The Monte Carlo model is mainly influenced by the dust concentration in the workplace of building materials enterprises and is suitable for scenarios where the dust concentration in the workplace of the building materials enterprises is relatively uniform and the average dust concentration is less than or equal to 6mg/m³. Conclusion: ART is most accurate when workplace information is specific and average dust concentration is > 1.5 mg/m³; whereas, The Monte Carlo model is the best when dust concentration is homogeneous and average dust concentration is < 6 mg/m³.

• Journal of the Korean Society of School Health
• /
• v.18 no.1
• /
• pp.15-25
• /
• 2005

Purpose: Recently there are scientific evidences for the health effects of Asian dust-storms. Particularly in 2002, the daily average of $PM_10$ exceeded 600 and 700 $\mu{g}/m^3$ in March and April respectively. We examined the effects of Asian dust‐storms on perceived symptoms and preventive behaviors among children, adults, and elders. Method: The subjects of this study were 425 children, 444 adults and 60 elders. A questionnaire survey was carried out on the children and the adults by teachers and on the elders by interviewers to obtain information on demographic variables, perceived symptoms and preventive behaviors, previous respiratory disease, environmental tobacco smoke, and proximity between the house and the road during Asian dust-storms. We analyzed using descriptive statistics, $X^2$ test and multiple logistic regression models. After adjustment for potential confounders, we estimated the odds ratios and 95% confidence intervals of the children and the elders for perceived symptoms and preventive behaviors. Result: The elders had a significantly higher prevalence of respiratory symptoms than the other groups. The children had a significantly higher prevalence than the adults in getting URI (1.51), coughing (1.68), rhinorrhea (1.46), fever (2.39) and medication for allergy or asthma (1.90). The children had better behaviors than the elders in closing windows (3.57), taking less outdoor recreational activity (2.59) and staying home (2.60). Conclusion: This study suggested that children and elders are susceptible to the effects of Asian dust on health. Health educators should inform these populations about the influence of Asian dust and provide health education for preventive behaviors.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.448-453
• /
• 2006

Electrical resistivity is an important property for the collection efficiency in the electrostatic precipitator. In this paper, electrical resistivities of tobacco dusts, yellow sand dusts and pine pollens are measured using a high voltage conductivity cell based on JIS B 9915. The resistivities of three kinds of indoor dusts are about $1{\times}10^7\;{\Omega}{\cdot}cm^2$ in the normal range and dust collection efficiency using an electrostatic precipitator at to face velocity of 1.0 m/s shows over 99% for the three kinds of indoor dusts.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.57-61
• /
• 2005

A strain of Bacillus thuringiensis that showed signifi­cantly high toxicity to Plutella xylostella was isolated from a dust sample collected from Chinese tobacco warehouse and characterized. The isolate named B. thuringiensis LY-99 was determined to belong to subsp. alesti (H3a3c) by an H antisera agglutination test and produced bipyramidal inclusions. Plasmid and crystal protein patterns of the LY-99 were different from those of the reference strain, subsp. alesti. PCR analysis with specific primers revealed that this isolate contained abundant cry genes including crylAa, crylAc, crylB, crylD, crylE, crylF and cry2 genes, which was absolutely different from cry gene profile of the subsp. alesti. In addition, insecticidal activity of the LY-99 against P. xylostella larvae was about 44 times higher than that of the subsp. alesti.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.433-438
• /
• 2016

The current study evaluated the air quality of the smoking booth equipped with the air purification system consisting of photocatalysts and air filters by measuring the concentrations of hazardous substances of tobacco smoke such as CO, HCHO, $CH_3CHO$, PM10 and PM2.5. To enhance the removal efficiency of hazardous substances, an infrared ray was exposed to improve the reactivity of OH radical generated from the photocatalyst toward environmental tobacco smoke (ETS) gas phase hazardous materials. It was found that the smoking booth with the air purification system improved the removal efficiency of hazardous substances containing formaldehyde by 85.2% compared to that of the smoking booth without any purification systems. In addition, the removal efficiency of the fine dust after treatment was enhanced up to 89.4%.