• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.510-519
• /
• 2013

In this study, the spray characteristics of a pressure swirl atomizer classified into a liquid sheet-type swirl nozzle for Urea-SCR system were investigated experimentally with the variation of injection pressure. The length to diameter ratio ($l_o/d$) of the nozzle was 3.1, and the swirler was set inside the nozzle tip to give injecting fluid angular momentum. The injection duration of the nozzle was controlled by PWM (pulse width modulation) modes. The development processes of the spray were imaged by a 2-D PIV system, and the change of spray angle was measured. The atomization characteristics, including axial velocity and SMD, were measured using a 2-D PDA system with the injection pressures at room temperature and ambient pressure conditions. As the experimental results, the injection pressure had a significant impact on the spray structure showing a different shape around the spray leading edge, and the smaller SMD was observed with increasing injection pressures, which was similar to that of the previous work.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제34권3호
• /
• pp.299-305
• /
• 2010

In general, the flexible forming die that has been used in the flexible forming process has the identical punch size; hence, its flexibility is relatively low because the range of allowable curvature radii is limited due to the uniform punch tip radius. Hence, a conceptual design of a sectional flexible die is presented for enhancing the flexibility of the forming process. Two punches of different sizes are used to configure the arbitrary forming surface. For a forming region with a relatively large curvature radius, a large punch array block is used; on the other hand, for the forming regions with small curvature radii, a small punch block is used. The cross-sectional profiles are compared with the target shape for evaluating the effectiveness of the process. Consequently, it is confirmed that the sectional flexible die can be used along with a combination of punch blocks of different sizes for manufacturing objective surfaces of complex shapes.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.431-436
• /
• 2015

PURPOSE. The aim of this study was to evaluate occlusal contacts generated by 3 different biogeneric design modes (individual (BI), copy (BC), reference (BR)) of CEREC software and to assess the designs subjectively. MATERIALS AND METHODS. Ten pairs of maxillary and mandibular casts were obtained from full dentate individuals. Gypsum cast contacts were quantified with articulating paper and digital impressions were taken. Then, all ceramic crown preparation was performed on the left first molar teeth and digital impressions of prepared teeth were made. BI, BC, and BR crowns were designed. Occlusal images of designs including occlusal contacts were superimposed on the gypsum cast images and corresponding contacts were determined. Three designs were evaluated by the students. RESULTS. The results of the study revealed that there was significant difference among the number of contacts of gypsum cast and digital models (P<.05). The comparison of the percentage of virtual contacts of three crown designs which were identical to the contacts of original gypsum cast revealed that BI and BR designs showed significantly higher percentages of identical contacts compared with BC design (P<.05). Subjective assessment revealed that students generally found BI designs and BR designs natural regarding naturalness of fissure morphology and cusp shape and cusp tip position. For general occlusal morphology, student groups generally found BI design "too strong" or "perfect", BC design "too weak", and BR design "perfect". CONCLUSION. On a prepared tooth, three different biogeneric design modes of a CAD/CAM software reveals different crown designs regarding occlusal contacts and morphology.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.81-100
• /
• 2013

During the final quarter of the last century considerable efforts have been spent to reduce the hull pressure fluctuations caused by unsteady propeller cavitation. This has resulted in further changes in propeller design characteristics including increased skew, tip unloading and introduction of "New Blade Sections" (NBS) designed on the basis of the so-called Eppler code. An experimental study was carried out to investigate flow characteristics of alternative two-dimensional (2-D) blade sections of rectangular planform, one of which was the New Blade Section (NBS) developed in Newcastle University and other was based on the well-known National Advisory Committee for Aeronautics (NACA) section. The experiments comprised the cavitation observations and the measurements of the local velocity distribution around the blade sections by using a 2-D Laser Doppler Anemometry (LDA) system. Analysis of the cavitation tests demonstrated that the two blade sections presented very similar bucket shapes with virtually no width at the bottom but relatively favourable buckets arms at the suction and pressure sides for the NACA section. Similarly, pressure analysis of the sections displayed a slightly larger value for the NBS pressure peak. The comparative overall pressure distributions around the sections suggested that the NBS might be more susceptible to cavitation than the NACA section. This can be closely related to the fundamental shape of the NBS with very fine leading edge. Therefore a further investigation into the modification of the leading edge should be considered to improve the cavitation behaviour of the NBS.

• Journal of the Korean Ceramic Society
• /
• 제54권3호
• /
• pp.211-216
• /
• 2017

ZnO nanopowder was synthesized using a relatively facile and convenient glycol process. ZnO nanopowder was successfully synthesized at temperatures as low as $125^{\circ}C$ using zinc acetate as the Zn source and 1,4-butanediol as the solvent. Then, the effects of water content on the growth process and morphological evolution of ZnO powders were investigated using 1,4-butanediol and water as binary solvent mixtures. Using pure 1,4-butanediol at a temperature above $125^{\circ}C$, the prepared hexagonal ZnO nanopowder exhibited a quasi-spherical shape with average crystalline size of approximately 30 - 50 nm. It is also demonstrated that the morphology of ZnO powders can be controlled by the addition of various water content in 1,4-butanediol. With increasing water content, the morphologies of the ZnO powders changed sequentially from quasi-spherical to hexagonal plate and pyramid, and finally to hexagonal prismatic with a pyramidal tip. A sharp peak centered at 384 nm in the UV region and a weak broad peak in the visible region between 450 and 700 nm were shown in the room temperature PL spectra of the ZnO synthesized using the glycol process, regardless of the addition of water, suggesting that ZnO nanopowders with the best crystallinity were obtained under these conditions.

• Journal of KIISE:Software and Applications
• /
• 제31권5호
• /
• pp.605-616
• /
• 2004

A new practical implementation of a facial verification system using cumulative histogram of surface curvatures for the local and contour line areas is proposed, in this paper. The approach works by finding the nose tip that has a protrusion shape on the face. In feature recognition of 3D face images, one has to take into consideration the orientated frontal posture to normalize after extracting face area from the original image. The feature vectors are extracted by using the cumulative histogram which is calculated from the curvature of surface for the contour line areas: 20, 30 and 40, and nose, mouth and eyes regions, which has depth and surface characteristic information. The L1 measure for comparing two feature vectors were used, because it was simple and robust. In the experimental results, the maximum curvature achieved recognition rate of 96% among the proposed methods.

• Journal of Physiology & Pathology in Korean Medicine
• /
• 제20권5호
• /
• pp.1089-1101
• /
• 2006

Following conclusions are drawn from study about Yukmigiwhangwon through referring to literatures and reviewing in the point of Hyungsang medicine. Yukmigiwhangwon was prescribed by Jeon Eul in order to cure five kinds of flaccidity of infants, but after since then it has been basically applied to symptoms which was caused by deficiency of the kidney not only infants but also adult. The deficiency of kidney is the lack of vital essence and body fluid stored in kidney, it happens because infants are born in the conditions of lack of receiving in the womb. And it happens because adults infringe the rules of life, especially the sexual life. Main symptoms of the poverty of renal functions are emptiness of the brain marrow, dizziness, forgetfulness, tinnitus, deafness, vertigo and dim eyesight, insomnia, the low back and knees aching and limping, heat on the legs, tibia aching, nocturnal emission, dry mouth, reddened tongue and little coating or non coating of the 'tongue, weak blood meridians. the treating method is nourishing Eum and supplementing kidney. In Dongeuibogam Yukmigiwhangwon is mentioned in the parts of vital essence, blood, voice, kidney, urine, eye, ear, the low back, hair, fire, exhaustion syndrome, cough, polydipsia, infant, etc. The shapes which Yukmigiwhangwon is applied to are the Dam Body Doing deficiency of Eum due to excess of Yang, man, infant, Jung type, Fish group, reverse triangular shape, big headed man, big eared man, big mouthed man, man having prominent cheekbones, man having long waist, man having big hips, man with thick hair or white hair, man with bald on the head, etc. In color it is applied to darkish complexion, flushed tip of the nose, or flushed cheek bones. Through inquiring into the clinical cases on the points of Hyungsang medicine Yukmigiwhangwon is efficacious cure to lumbago, symptoms of tendons and bones, symptoms of eyes and ears, symptoms of respiratory organs, dermatopathia, headache, polydipsia, urinary disorders, etc.

• Journal of Ocean Engineering and Technology
• /
• 제21권6호
• /
• pp.7-15
• /
• 2007

A mechanical model was developed to predict the behavior of point-loaded RC slender beams (a/d > 2.5) without stirrups. It is commonly accepted by most researchers that a diagonal tension crack plays a predominant role in the failure mode of these beams, but the failure mechanism of these members is still debatable. In this paper, it was assumed that diagonal tension failure was triggered by the concrete cover splitting due to the dowel action at the initial location of diagonal tension cracks, which propagate from flexural cracks. When concrete cover splitting occurred, the shape of a diagonal tension crack was simultaneously developed, which can be determined from the principal tensile stress trajectory. This fictitious crack rotates onto the crack tip with load increase. During the rotation, all forces acting on the crack (i.e, dowel force of longitudinal bars, vertical component of concrete tensile force, shear force by aggregate interlock, shear force in compression zone) were calculated by considering the kinematical conditions such as crack width or sliding. These forces except for the shear force in the compression zone were uncoupled with respect to crack width and sliding by the proposed constitutive relations for friction along the crack. Uncoupling the shear forces along the crack was aimed at distinguishing each force from the total shear force and clarifying the failure mechanism of RC slender beams without stirrups. In addition, a proposed method deriving the dowel force of longitudinal bars made it possible to predict the secondary shear failure. The proposed model can be used to predict not only the entire behavior of point-loaded RC slender shear beams, but also the ultimate shear strength. The experiments used to validate the proposed model are reported in a companion paper.

• Journal of Aerospace System Engineering
• /
• 제11권4호
• /
• pp.36-43
• /
• 2017

Blade design optimization of QTP-UAV prop-rotor was conducted using ModelCenter(R). Performance efficiency of the blade in hover and forward flight were adopted as the multi-objective function. Required power and pitch link force applied to constraint in each flight mode and limited lower than the value of the baseline blade. Design variables of root chord length of the blade, taper ratio, twist slope, twist angle at 0.5R of the blade, anhedral angle, parabolic coefficient of a tip shape and location of airfoil were used to generate the blade planform. CAMRAD-II, the comprehensive analysis program of rotorcraft, was used for performance analysis of prop-rotor blade in design process. Performance of the optimized blade improved 1.6% of figure of merit in hover and 13.6% of propulsive efficiency in forward flight. Pitch link force also reduced approximately 30% less than that of the baseline blade.

• Korean Journal of Ichthyology
• /
• 제34권1호
• /
• pp.16-24
• /
• 2022

The eggs development and early life history of Sarcocheilichthys variegatus wakiyae was investigated. The adult fishes were collected in Yeongsangang River, Damyang-gun, Jeollanam-do, Korea, and their spawning inducement was carried by sex maturation hormone (Ovaprim) injections. Spawning amount was mean 31±3.5 Mature eggs were cicular in shape and mean 2.40±0.05 mm in diameter. Hatching period of the embryo was 230 to 240 hours after fertilization under water temperature of 22℃. The newly hatched larvae were 10.7±0.19 mm in total length (TL). 3 days after hatching, postlarvae was measured 12.0±0.13 mm in TL and the tip of the caudal fin was bent at 45°. 11 days after hatching, it was measured 14.6±0.13 mm in TL, and transferred to juvenile as the number of fins (iii7 dorsal fin, iii6 anal fin, i7 ventral fins) reached a constant number of each part.