• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1365-1371
• /
• 2011

The intensity and duration of sexual behavior in Bos indicus was assessed through the continuous observation of sexual receptivity. Two groups of cows were formed: only synchronized (n = 50) and other group further superovulated (n = 20). An intravaginal implant that released progesterone over 9 d was used. After removing the implant, 25 mg of $PGF_{2{\alpha}}$ was administered. In the superovulated group, the administration of 280 mg (Follicle stimulant hormone) FSH-P1 per cow with a decreasing dosage over 4 d was utilized. In both groups, behavioral observations began at the moment of implant removal. Sexual behavior was analyzed using a Kruskal-Wallis test to compare the mean of hours in estrus, effective mountings and number of mounts/hour during estrus. A nonparametric survival analysis was performed using the time in two ways: i) when an event happened it was placed in a 24 h timeframe and, ii) the time of observation in continuous form (96 h) assessing the difference between curves by the log rank test Chi-square. The only significant difference was the number of mounts/h during receptivity (p<0.05). In the superovulated group three periods of sexual activity during the day were identified, with these events being of greater frequency and duration than the synchronized group (p = 0.02); besides, the superovulated group began estrus before the synchronized group (p = 0.0035) when using the total period. In a simulation study, when the number of observations went from two (06:00-18:00) to three periods (06:00, 12:00 and 18:00) cows detected accurately (<6 h after the onset) increased more than 20%. The results show that superovulated cows presented greater intensity and duration of sexual activity in contrast with only synchronized animals.

• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.67-76
• /
• 2002

MP3 audio format has good quality and high compression rate ; therefore, the use of MP3 format increases. The requirement of keeping the extra information such as author and lyrics in MP3 files increases. And the tagging systems designed to meet this requirement are suggested. ID3 vl tag and Lyrics3 v2 tag are two most widely used tagging systems. But ID3 vl tag and Lyrics3 v2 tag are the last things to arrive when the file is being streamed. Therefore, users cannot get the tag information until the entire audio file is downloaded. Moreover information synchronized with audio stream may lose its feature. In this paper, a system searching and playing audio files based on tag information in MP3 files is implemented. This system solves the problem that the tag information is ignored when an MP3 files is played on internet. An audio object is described in an XML document, and timing and synchronization between elements in that In document is provided in HTML+TIME style using XSL.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.41-48
• /
• 2011

In order to detect driver's state in a driver safety system, both overt and covert measures such as driving performance, visual attention, physiological arousal and traffic situation should be collected and interpreted in the driving context. In this paper, we suggest a vehicle monitoring system that provides multimodal information on a broad set of measures simultaneously collected from multiple domains including driver, vehicle and road environment using an elaborate timer equipped as a soft synchronization mechanism. Using a master timer that records key values from various modules with the same master time of short and precise interval, the monitoring system provides more accurate context awareness through synchronized data at any given time. This paper also discusses the data collected from nine young drivers performing a cognitive secondary task through this system while driving.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.105-112
• /
• 1998

In this paper, we propose a ESP(Extended Scan Path) architecture for multi-board testing. The conventional architectures for board testing are single scan path and multi-scan path. In the single scan path architecture, the scan path for test data is just one chain. If the scan path is faulty due to short or open, the test data is not valid. In the multi-scan path architecture, there are additional signals in multi-board testing. So conventional architectures are not adopted to multi-board testing. In the case of the ESP architecture, even though scan path is either short or open, it doesn't affect remaining other scan paths. As a result of executing parallel BIST and IEEE 1149.1 boundary scan test by using the proposed ESP architecture, we observed that the test time is short compared with the single scan path architecture. By comparing the ESP architecture with single scan path responding to independency of scan path, test time and with multi-scan path responding to signal, synchronization, we showed that the architecture has improved results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.271-277
• /
• 2003

Recently as the environmental noise getting influential social problem, it is the fact that the demand on noise reduction increases with the advance of the standard of living. Therefore increasing the interest on the noise in common, it is eagerly demanded that the endeavour for reducing the noise of the rotating machinery, especially the machinery related a flowing including the household electric products, which is pointed out the primary noise source in environment. As proceeding study for fan noise, theory of fan noise property is arranged and this control method is shown. Blade passage noise of total noise spectrum. Thus in the aspect of noise reduction, noise source and identification of noise radiation characteristics of axial flow fan are demanded in detail. The sound source is analyzed by using sound pressure and sound intensity. In that time, synchronization of axial flow fan using optical sensor is executed, and to identify the location of exact noise source in the fan profile determination of recording time is proposed. In the rotating of tan, it is explained that the location of noise source exists in and by the directivity, the noise radiation pattern of axial flow fan is determined and the flow of sound is visualized in the figure of contour mapping.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.22 no.1
• /
• pp.1.2-5
• /
• 1994

Ionospheric sounding experiments have been conducted at RRL (Radio Research Laboratory), Ministry of Communications, using Digisonde 256 since its installation in 1990. Routine observations of the vertical sounding are carried out 48 times (or 39 times) a day, at every 24 hour. In addition, we also made oblique sounding experiments to obtain the real time data of Maximum Usable Frequency (MUF) and detect the anomalous HF propagation, as a part of the joint study between RRL and CRL (Communications Research Laboratory) of Japan. The two stations involved in the study were Anyang (RRL, Korea) and Kokubunji (CRL, Japan). The ionosondes used in both stations were Digisonde 256, developed by ULCAR (University of Lowell, Center for Atmospheric Research), U. S. A. , and the synchronization of time was accomplished with the help of GPS receiver. During most part of the experiments RRL transmitted non-modulated pulses, and CRL received them. The experiment was scheduled from October 25 through October 29, 1993. However, the ionosphere was not developed well enough to conduct the experiment with pre-set operation parameters. The experiment became successful (from 0500 UT to 0800 UT, October 29) only after the operation parameters had been changed, and the continuous ionograms were obtained by CRL at 0718 UT and 0733 UT in October 29, 1993. We believe this type of experiment will ensure the qualitative enhancement of solar-terrestrial physics research and a routine observation of the oblique ionospheric sounding. In this report, we present the results of the fore-mentioned oblique sounding as well as the vertical sounding results obtained by Digisonde 256 at Anyang station of RRL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.24-33
• /
• 2002

The cell search scheme for W-CDMA consists of the following three stages: slot synchronization(1st stage), group identification and frame boundary detection(2nd stage), and long code identification(3rd stage). The performance of the cell search when a mobile station is switched on, which is referred to as initial cell search, is decreased by the initial frequency and timing error. In this paper, we propose the pipeline structured initial cell search scheme using time trackers to compensate for the impact of the initial timing error in the stage 2 and stage 3. The simulation results show that the performance of the proposed scheme is maximal 1.5dB better than that of the conventional one when the initial timing error is near ${\pm}T_c$/2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.743-754
• /
• 2006

In the proposed method, two regular laser working at two different wavelengths perform moving object detection alternatively in time. The laser intensity and the beaming period of each laser is equally maintain as to the single laser radar, hence, externally, dual beam lasers radar works exactly same as the single beam laser radar except that the proposed dual lasers radar needs additional post-processing of received signals in the receiver. To verify the robustness of the proposed method, a set of computer simulation has been performed. The communication channel is assumed to be additive white Gaussian noise, and the perfect synchronization is assumed. All other simulation parameters such as signal power and signalling period are equally maintain in both systems while the signal processing time such as spreading and filtering are expected to be trivial in call cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1359-1370
• /
• 2009

In wireless sensor networks, data dissemination is based on data-centric routing that well matches the publish/subscribe communication paradigm. The publish/subscribe paradigm requires decoupling properties: space, time, and synchronization decoupling. For large-scale applications, the three decoupling properties provide scalability and robust communication. However, existing data dissemination schemes for wireless sensor networks do not achieve full decoupling. Therefore, we propose a novel data dissemination scheme that fully accomplishes the three decoupling, called ARBIETER. ARBITER constructs an independent network structure as a logical software bus. Information interworking between publishers and subscribers is indirectly and asynchronously performed via the network structure. ARBITER also manages storage and mapping of queries and data on the structure because of supporting different time connection of publishers and subscribers. Our simulation proves ARBITER show better performance in terms of scalability, network robustness, data responsibility, mobility support, and energy efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1161-1167
• /
• 2004

The conventional PLL(phase locked loop) frequency synthesizer takes a long switching time because of the inherent closed-loop structure. The digital hybrid PLL(DH-PLL) which includes the open-loop structure into the conventional PLL synthesizer has been studied to overcome this demerit. It operates in high speed, but the hardware complexity and power consumption are the serious problem because the DLT(digital look-up table) is usually implemented by the ROM which contains the transfer characteristic of VCO(voltage controlled oscillator). This paper proposes a new DH-PLL using a very simple DLT-replacement digital logic instead of the complex ROM-type DLT. Also, a timing synchronization circuit for the very small over-shoot and shorter settling time is designed for the ultra fast switching speed at every frequency synthesis. The hardware complexity gets decreased to about $28\%,$ as compared with the conventional DH-PLL. The high speed switching characteristic of the frequency synthesis process can be verified by the computer simulation and the circuit implementation.