• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.51-56
• /
• 2009

Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1185-1194
• /
• 2012

This paper proposes a new terrestrial 3DTV broadcasting standard specification based on synchronization with non-real-time contents in order to overcome quality limitations of the current 3DTV services that are arisen from the limited bandwidth of the legacy broadcasting channel. In the services using the proposed specification, one view sequence of a stereoscopic video content is delivered as a non-real-time content in idle time, and the other view sequence is transmitted in real time broadcasting signal, thereafter two sequences are synchronized in a receiver for display. Thus, it is possible to provide higher-quality stereoscopic video content services than the current 3DTV services. In order to realize these services, a new mechanism is required which enables synchronization between the data that are from different transmission media and time. Therefore, this paper suggests a solution by multiplexing the synchronization signals of non-real-time contents into broadcasting signals with real-time streams together. This solution can provide a accurate synchronization mechanism by minimum updates of legacy broadcasting systems while maintaining compatibility with legacy services.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.99-108
• /
• 1999

In this paper, we propose $\pi$/4 QPSK scheme with block modulation algorithm, which can reduce preamble in order to transmit ATM cell efficiently in the uplink channel of LMDS, and also designed a new carrier recovery circuit which can improve carrier synchronization performance of block demodulation algorithm. The $\pi$/4 QPSK scheme employing the proposed block modulation algorithm achieved efficient frame transmission by making use of a few preamble when carrier synchronization, symbol timing synchronization and slot timing synchronization were performed by burst data of ATM cell in LMDS environment. For performance evaluation of the proposed method, a simulation analyzing the variation of carrier synchronization, symbol timing synchronization and slot timing synchronization using LMDS environment and burst mode condition was executed. In the simulation, the proposed method showed a good performance even though the reduced preamble as a few aspossible when carrier synchronization, symbol timing synchronization and slot timing synchronization is performed.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.58-68
• /
• 2000

In this paper we introduce the correlation-aided distributed sample acquisition (CDSA) scheme for fast cell search in IMT-2000 W-CDMA cellular system. The proposed scheme incorporates the state symbol correlation process into the comparison-correction based synchronization process of the original DSA scheme to enable fast acquisition even under very poor channel environment. for its realization, each mobile station (MS) has to store in its memory a set of state sample sequences. which are determined by the long-period scrambling sequences used in the system and the sampling interval of the state samples. CDSA based cell search is carried out in two stages : First, the MS first acquires the slot timing by using the primary synch code (PSC) and then identifies the igniter code which conveys the state samples of the current cell . Secondly. the MS identifies the scrambling code and frame timing by taking the comparison-correction based synchronization approach and, if the identification is not done satisfactorily within preset time. it initiates the state symbol correlation process which correlates the received symbol sequence with the pre-stored state sample sequences for a successful identification. As the state symbol SNR is relatively high. the state symbol correlation process enables reliable synchronization even in very low chip-SNR environment. Simulation results show that the proposed CDSA scheme outperforms the 3GPP 3-step approach, requiring the signal power of about 7 dB less for achieving the same acquisition time performance in low-SNR environments. Furthermore, it turns out very robust in the typical synchronization environment where large frequency offset exists.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.70-74
• /
• 2005

Sensor networks have emerged as an interesting and important research area in the last few years. These networks require that time be synchronized more precisely than in traditional Internet applications. In this paper, we compared and analyzed the performance of the RBS and TDP mechanisms in the view of the number of generated messages and the synchronization accuracy. The reason that we chose be RBS ad the TDP mechanism to be compared is because the RES is an innovative method to achieve the high accurate synchronization. And TDP is a new method taking over the NTP method which has been used widely in the Internet. We simulated the performance of two methods assuming the IEEE 802.11 CSMA/CA MAC. As for the number of nodes in the sensor networks, two situations of 25 (for the small size network) and 100 (for the large size network) nodes are used. In the aspect of the number of messages generated for the synchronization, TDP is far better than RBS. But, the synchronization accuracy of RBS is far higher than that of TDP. We cm conclude that in a small size sensor networks requiring very high accuracy, such as an application of very high speed objects tracking in a confined space, the RBS is more proper than TDP even though the RBS may generate more traffic than TDP. But, in a wide range sensor networks with a large number of nodes, TDP is more realistic though the accuracy is somewhat worse than RBS because RBS may make so many synchronization messages, and then consume more energies at each node. So, two mechanisms may be used selectively according to the required environments, without saying that the one method is always better than the other.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.3
• /
• pp.1-11
• /
• 2018

This paper explores the reliability issue especially associated with the time-division synchronous communication when a networking stack is implemented using software timers provided by embedded operating systems. Especially, we explore the reliability of beacon synchronization of IEEE 802.15.4. Our experiments based on its practical implementation clearly show that processing delays or losses of hardware timer interrupts used for software timers lead to occasional failures in beacon synchronization. To avoid such failures, we suggest a reception time compensation scheme that turns on the receiver earlier than expected.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.102-108
• /
• 2015

In general, two way satellite communication systems based on TDMA(Time Division Multiple Access) require network clock synchronization between hub station and remote terminals. This paper describes basic concepts for network clock synchronization based on NCR(Network Clock Reference) clock recovery scheme as suggested in DVB-S2/ RCS2 international standards. in addition, a new NCR insertion method has been proposed and evaluated in terms of supporting CCM mode as well as ACM mode which optimizes throughput by changing code rates and modulation types ranging from QPSK to 32-APSK.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.135-138
• /
• 2008

The existing protocol which processes sequentially synchronization has the problem where synchronization tasks which are requested subsequently from multiple client. Should be waited for a long time. In this paper, we propose a implementation of concurrent synchronization protocol that is capable of reducing the waiting time. If there are no update conflicts among different synchronization tasks, the proposed protocol synchronizes using the multi-queue based on the round-robin scheme, in order to reduce the waiting time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.588-591
• /
• 2009

In ubiquitous computing GIS services, it is possible to use the spatio-temporal data anytime through the mobile device. GIS services regularly update use the latest spatio-temporal data to provide the most suitable services. For this situation, update data is distributed to CD or wired networks update services. However, this method has problem to propagate update data to users as taking long time. In this paper, suggests a synchronization system which propagate update data to users for reducing processing time efficiently. This synchronization system collects update data in the field and synchronizes server with collected data to use mobile devices by real time. For this system, I design and materialize synchronization module which updates update data and wireless network module.

• Korean Journal of Remote Sensing
• /
• v.18 no.2
• /
• pp.91-96
• /
• 2002

The performance characteristics of a satellite imager using a Time Delay and Integration(TDI) Charge Coupled Device (CCD) with fixed integration time is investigated for the variation of satellite altitude and tilt angle. In consequence of the investigation TDI synchronization using tilt imaging is proposed as a solution to compensate geometric performance degradation due to altitude decrease. The tilt angle optimized for the TDI synchronization at decreased altitude is presented. This result can be used for a TDI CCD imager with variable integration time in a certain range as well.