• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.484-491
• /
• 2008

In this paper, we design and fabricate the L-band high speed pulsed HPA using LDMOS FET. And we propose the high voltage and high speed switching circuit for LDMOS FET. The pulsed HPA using LDMOS FET is simpler than using GaAs FET because it has a high gain, high output power and sin81e voltage supply. LDMOS FET is suitable for pulsed HPA using switching method because it has $2{\sim}3$ times higher maximum drain-source voltage(65 V) than operating drain-source voltage($V_{ds}=26{\sim}28\;V$). As results of test, the output peak power is 100 W at 1.2 GHz, the rise/fall time of output RF pulse are 28.1 ns/26.6 ns at 2 us pulse width with 40 kHz PRF, respectively.

• The Korean Journal of Applied Statistics
• /
• v.28 no.3
• /
• pp.429-442
• /
• 2015

Volatility forecasting in financial markets is an important issue because it is directly related to the profit of return. The volatility is generally modeled as time-varying conditional heteroskedasticity. A generalized autoregressive conditional heteroskedastic (GARCH) model is often used for modeling; however, it is not suitable to reflect structural changes (such as a financial crisis or debt crisis) into the volatility. As a remedy, we introduce the Markov regime switching GARCH (MRS-GARCH) model. For the empirical example, we analyze and forecast the volatility of the daily Korea Composite Stock Price Index (KOSPI) data from January 4, 2000 to October 30, 2014. The result shows that the regime of low volatility persists with a leverage effect. We also observe that the performance of MRS-GARCH is superior to other GARCH models for in-sample fitting; in addition, it is also superior to other models for long-term forecasting in out-of-sample fitting. The MRS-GARCH model can be a good alternative to GARCH-type models because it can reflect financial market structural changes into modeling and volatility forecasting.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.327-334
• /
• 2011

The objective of this study was to develop a scientific approach for investigating Korean dance in detail, and to examine the intense expressions and various movements, which are based on Danjeon breathing. For the purpose, we analyzed the movement changes and distribution of forces resulting from the switch in movement between exhalation and inhalation while bending, which is the most basic movement in Korean dance. The following conclusions were drawn from this study. In Korean dance, bending with breathing involves less back-and-forth-movement and more up-and-down movement, as compared to bending without breathing; this indicates greater body stability and a wider range of movements while bending with breathing. In addition, less time is required for bending with breathing at the point of switching from exhalation to inhalation, and it involves less movement of the supporting leg; thus, vending with breathing involves faster switching from bending movements to extending movements. While bending, the raised leg goes through a less smooth curve while breathing, which indicates stronger movement of the toes. Bending with breathing requires a greater braking force than bending without breathing, and the vertical force, generated by switching from exhalation to inhalation, is transferred to extending movements using the ground load. The results of this study can be potentially employed to investigate the expressions used in Korean dance on th basis of its principle of forces. Korean dance has evolved into various creative forms, and basic analytical studies of these diverse forms and related breathing methods re required in the future.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.1
• /
• pp.41-45
• /
• 2011

Hybrid fault current limiters (FCL) have been researched at Yonsei University. The hybrid FCL has advantages such as having a rapid response to a sudden fault situation and a fast recovery time from a quench. It consists of an asymmetric HTS coil, a switching module, and a bypass reactor. The asymmetric HTS coil is wound with two different types of HTS wires in an opposite direction so that it has nearly zero inductance at the superconducting state. When the quench occurs at the fault state, a strong magnetic field is generated from the asymmetric coil because of different quench characteristics of two HTS wires, and then a repulsive force is induced in the switching module. The force opens the switch and the fault current is pushed into the bypass reactor. In this research, we analyzed the cause of the repulsive force and confirmed, experimentally and computationally, that the magnitude of a repulsive force is varied by changing the gap distance between the asymmetric coil and the switching module. By using the FEM simulation, we calculated the repulsive force with respect to the gap distance and verified that the effect of the gap distance. Then, short circuit test was carried out to confirm the correct operation of the fast switch.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.559-565
• /
• 2009

Power dissipation during scan testing is becoming an important concern as design sizes and gate densities increase. The high switching activity of combinational circuits is an unnecessary operation in scan shift mode. In this paper, we present a novel architecture to reduce test power dissipation in combinational logic by blocking signal transitions at the logic inputs during scan shifting. We propose a unique architecture that uses dmuxed scan flip-flop (DSF) and transmission gate as an alternative to muxed scan flip-flop. The proposed method does not have problems with auto test pattern generation (ATPG) techniques such as test application time and computational complexity. Moreover, our elegant method improves performance degradation and large overhead in terms of area with blocking logic techniques. Experimental results on ITC99 benchmarks show that the proposed architecture can achieve an average improvement of 30.31% in switching activity compared to conventional scan methods. Additionally, the results of simulation with DSF indicate that the powerdelay product (PDP) and area overhead are improved by 28.9% and 15.6%, respectively, compared to existing blocking logic method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.351-358
• /
• 2003

This paper describes distribution characteristics of switching surge voltage in stator windings of induction motor driven by IGBT PWM inverter. To analyze the voltage distribution between the turns and coils of stator winding, equivalent circuit model of induction motor including cable was proposed and high frequency parameter is computed by using finite-element method (FEM). From the electro-magnetic transient program (EMTP) simulation of the whole system for induction motor, feeder cable, and PWM inverter, the variable effect on rising time of the inverter, cable length, and switching frequency on the voltage distribution is also presented. In order to experiment, an induction motor, 380[V], 50[HP], with taps from one phase are built to consider the voltage distribution so that these results can be helpful when filter was designed to remove high dv/dt.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.201-210
• /
• 2002

A number or MPLS ATM switching system have been proposed to increase the access speed or current routers, but they cannot satisfy the Internet users who use diverse applications. So they are required to support the so-called differential service, which discriminates service behaviors according to the service class. In this paper, to support this differential service we suggest an LSP control method, which uses the extended LDP message and establishes several different LSPs for each FEC according to the service class. Also, we propose an marking algorithm using the cell loss priority field or ATM cells in order to process the differential service according to application categories. In addition, we present a forwarding procedure based on the LSP control method and the marking algorithm. A forwarding model applied this forwarding procedure can be easily implemented with a minimum modification of existing MPLS ATM switching systems. Therefore, we can save cost and time needed to implement the proposed model. Finally, we estimate the performance behaviors of the proposed application-based forwarding model by the AweSim simulation package.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.902-908
• /
• 2009

TETRA is the standard of Digital Trunked Radio System developed by the ETSI (European Telecommunications Standards Institute). It is currently adopted as Electric Power IT Wireless Backbone Network in Korea, and a national enterprise is going on for versatile utilization of TETRA. To use TETRA wireless network, TETRA modem is very necessary such that performance measurements are very crucial for each TETRA modem by various manufacturers. In this paper, PED (Protocol Evaluation Data) is suggested for PD performance measurement in D-TRS wireless network environment. The performance measurements for different data lengths and transmission intervals are done using TG (Traffic Generator) on Test Bed. The data size is increased by 10 bytes from 10-byte to 400-byte, and it is measured 1,000 times for each transmission interval of 0.5, 1.0, and 1.5 seconds. Based on the transmission time measured, average transmission speed and MER (Message Error Rate) are derived for TETRA Modem performance measurement. Two TMR880i's of EADS are used for TETRA modem, and SwMI (Switching and Management Infrastructure) of EADS is used for switching system in this paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.485-490
• /
• 2012

In this paper, driver circuit of LED lights for ships is designed and implemented to replace conventional lights with filament which have short life time due to vibration of ships. The driver of LED module is switching circuit without transformer to reduce volume and cost. As switch circuit controls input 220 VAC with PWM, LED module is reliably driven. Power factor is improved by using valley-fill PFC compensation circuit which is handled to pulse current of switching circuit. Serial-parallel LED circuit is applied to reduce change period of lights of long-term navigation ships. Array of serial-parallel can operate even if some of LEDs is damaged. It is suitable for ships that power consumption and power factor of lights including developed drive circuit have 39Watt and 0.925 respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.925-933
• /
• 2003

Network is expected to be developed into optical Internet network collected IP layer and optical layer, but GMPLS is risen at the transitional evolution stage because of the present technology level. GMPLS that MPLS is extended and generalized is able to support not only the packet switching device but also the devices which perform switching in time, wavelength, and space domain. To implement the common control plane to these various switching types, GMPLS extends the existing MPLS signaling and routing protocol. In this paper, we describe the overview of GMPLS technology, and then we will refer to the OSPF(Open Shortest Path First), which was used to exchange the status information of link, as the plan of routing extension to exchange the information of various link type, bandwidth, link protection type etc. And also, we describe the definition of new protocol, so called, LMP that is a signaling protocol for solving complex problem which manages hundreds and thousands of links between two nodes. And we will examine and analyze the plan of signaling protocol extension to apply signaling protocol RSVP-TE(Resource Reservation Protocol) for traffic engineering in MPLS to network, and the message objects and formats associated with modified RSVP.