• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.35-38
• /
• 2006

Using the repeaters is indispensable to WiBro services. Repeater types are distinguished by usage, output power and required performance. In the paper, we have studied on the WiBro digital optic repeater design which has excellent performance characteristic than any other repeaters. WiBro has specific characteristic on modulation method TDD(Time Division Duplex)/OFDMA(Orthogonal Frequency Division Multiple Access) so that it demands specified H/W to design WiBro repeater. Switching technique has been introduced because of TDD characteristic in each amplifier on the repeater. Time Advance technique has been considered because of OFDM characteristic among RAS(Radio Access Station) and repeater. In this paper, we have studied on these techniques to increase repeater cell coverage and distance between RAS and repeater.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.401-404
• /
• 2002

We have studied on response time of the fringe-field switching (FFS) TFT-LCD using the LCs with negative dielectric anisotropy related to rubbing angle. Simulation and experimental results shows that when a rubbing angle approached $45^{\circ}$, a slope of voltage-dependent curve is decreased such that the operation voltage is increased, however the whole response characteristic between inter-gray levels have a trend to be fast.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.184-187
• /
• 2009

A liquid crystal device with switchable dynamic and memory modes was investigated and developed. The proposed device reveals the splay, $\pi$-twist, and bend states via selective switching among them. In the dynamic mode, the device is operated in the bend state, which exhibits a wide viewing-angle and a fast-response-time due to its self-compensated bend structure and flow-accelerated fast response time, respectively. In the memory mode, the permanent memory characteristics in the splay and $\pi$-twist sates are obtained, respectively. The switching mechanisms of the tristate device are also proposed.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.1
• /
• pp.24-28
• /
• 2003

We have studied the influence of rubbing angles with respect to in-plane field direction on electro-optic characteristics of in-plane switching (IPS) liquid crystal display. The results show that the threshold voltage increases and the operational voltage decreases as the rubbing angle increases. Further, the total response time and also response times associated with grey-to-grey transitions become fast as the rubbing angle decreases.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.597-605
• /
• 2012

With the smart grid coming near, wide-area supervisory control and data acquisition (SCADA) becomes more and more important. However, traditional SCADA systems are not suitable for the openness and distribution requirements of smart grid. Distributed SCADA services should be openly composable and secure. Event-driven methodology makes service collaborations more real-time and flexible because of the space, time and control decoupling of event producer and consumer, which gives us an appropriate foundation. Our SCADA services are constructed and integrated based on distributed events in this paper. Unfortunately, an event-driven SCADA service does not know who consumes its events, and consumers do not know who produces the events either. In this environment, a SCADA service cannot directly control access because of anonymous and multicast interactions. In this paper, a distributed security framework is proposed to protect not only service operations but also data contents in smart grid environments. Finally, a security implementation scheme is given for SCADA services.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.167-172
• /
• 2007

In this paper, we analyzed the molecular behavior of IPS-LCDs and VA-LCDs by using numerical simulation. The numerical simulation was performed on the basis of Ericksen-Leslie continuum theory. To improve the accuracy of the calculation, we considered fluid balance equation and director balance equation at the same time. thus, we calculated the flow effect for both switching on and off states. As the results of simulation, we confirmed abnormal twist in IPS-LCDs and fast molecular behavior in VA-LCDs which could influence response time.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.116-119
• /
• 2007

In this letter, we design a collision resolution protocol for optical burst switching ring networks to avoid burst collision. We define the offset time condition for no burst transmission collision and manage the free time list of nodes for no burst reception collision. In order to improve the throughput, we use a fiber delay line, void-filling, and void-compression. This protocol does not require any additional procedures for bandwidth reservation such as centralized assignment of bandwidth, lightpath setup of WDM ring networks, or token capturing for the burst transmission. The simulation results show that the proposed protocol can achieve high throughput while saving 70% of wavelengths when compared to round robin with random selection, round robin with persistent, and round robin with non-persistent with only destination delay.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1121-1126
• /
• 2003

In this paper we show impulse generator which is important component in UWB communication. There is two steps to generate monocycle impulse. In first step, Gaussian pulse was made by operation of transistor switching and operation time of transistor switching. The second step the high pass filter change from Gaussian to Monocycle impulse. The result of this impulse generator is impulse whose pulse width is 0,9 ns in time domain and amplitude is +/-250 ㎷.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.600-603
• /
• 2009

The liquid crystal device with switchable dynamic mode and memory mode has been investigated and developed. The proposed device reveals splay, ${\pi}$ twist and bend states by selective switching among them. In the dynamic mode, this device is operated in the bend state which exhibits the wide view angle and fast response time properties due to the self-compensated bend structure and flow accelerated fast response time. In the memory mode, the permanent memory characteristics in the splay and ${\pi}$ twist sates are obtained, respectively. The switching mechanisms of the tristate device are also proposed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.10
• /
• pp.646-651
• /
• 2000

Recently, the 2-phase brushless DC motor has been used in electric home appliance for low price and low energy consumption. In this paper, we analyzed a 2-phase BLDC motor using time-step finite element method. And the validity of analysis is confirmed by measuring the flux distribution on the surface of permanent magnet and back-EMF. As well, we have calculated the dynamic characteristics of target motor considering the Hall sensor position. So, we have found the optimum switching position, and improved performance of 2-phase BLDC motor.