• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.619-624
• /
• 2021

Vehicle orientation detection is a challenging task because the orientations of vehicles can vary in a wide range in captured images. The existing methods for oriented vehicle detection require too much computation time to be applied to a real-time system. We propose Rotate YOLO, which has a set of anchor boxes with multiple scales, ratios, and angles to predict bounding boxes. For estimating the orientation angle, we applied angle-related IoU with CIoU loss to solve the underivable problem from the calculation of SkewIoU. Evaluation results on three public datasets DLR Munich, VEDAI and UCAS-AOD demonstrate the efficiency of our approach.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S1
• /
• pp.97-101
• /
• 1995

We report the results of a real-time synchrotron x-ray scattering study of the growth of TiN thin films on Si(001) substrates by RF sputtering. Our experiemnts show that the morphology of the TiN films strongly depends on growth conditions. After the nucleation and growth takes place with random crystallographic orientation at the very early stage, the films grow with a preferred orientation. Such preferred orientation was found to depend on both the sputtering power and the carrier gases used in the sputtering. Generally, the final morphology assumes either(111) or (002) crystallographic orientation. Using Ar sputtering, a cross-over effect from(002) to (111) was observed at intermediate time. The nature of the observed morphological changes is discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.46-46
• /
• 2006

$SrTiO_3$ was annealed at two different annealing times (1 h and 16 h) to investigate the annealing effect on the grain size and orientation distribution. Electron backscattered diffraction (EBSD) was used to analyze the grain size and grain orientation distributions of the $SrTiO_3$. It is possible to understand the annealing effect on the microstructure evolution, by comparing the grain size and orientation distribution of the $SrTiO_3$ as a function of annealing time.

• Asia-Pacific Journal of Business
• /
• v.9 no.2
• /
• pp.15-37
• /
• 2018

The purpose of this paper was to explain on the conceptualisation of the Halal Orientation strategy (HOS) based on operation strategy perspective. The four variables constitute in HOS are staffing, materials, production process and storage together with transportation. By focusing on HOS, the manufacturers reinforce improvement in quality, cost control, time and flexibility of the production Halal food industry in Malaysia which is the performance objective of market competitiveness in Malaysia context. A self-administered questionnaire was designed and used to assess the significant of HOS that lead to improve quality, cost control, reduction in time and the flexibility among Halal food manufacturers in Malaysia. From a total of 443 Halal food manufacturers were involved in this study, only 137 respondents are usable for this research. The study showed significant results for the manufacturers to focus in Halal Orientation strategy (HOS) which have positive impacts on quality, cost control, time and flexibility. This research aimed to measure the HOS among food firms in Malaysia and to determine HOS in relation with the performance objective of operational outcomes.

• International journal of advanced smart convergence
• /
• v.13 no.2
• /
• pp.103-109
• /
• 2024

A nonlinear numerical analysis of orientation and velocity fields of the full Ericksen-Leslie theory for a nematic liquid crystal under shear flow is given. We obtained for the first time the three-dimensional orientation and two component velocity profiles evolutions for both in- and out-of-shear plane orientation anchorings. Complex evolution routes to steady state were found even for shear aligning nematic. As the Ericksen number increases monotonic evolution of velocity and orientation shifts towards multi-region nucleating director rotation growth with complex secondary flow generations. We found that contrary to the in-shear-plane anchorings like homeotropic or parallel anchorings, binormal anchoring gives rise to substantial non-planar three-dimensional orientation with nonzero secondary flow.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1367-1373
• /
• 2001

This study used fowl sperm from three White Leghom rooster reared at our laboratory. Semen samples were exposed to the magnetic field strengths of from 650 to 5700 Gauss for one. two, or three days to investigate the influence of magnetic field on the orientation of fowl spermatozoa. Fowl spermatozoa were found to orient with their long axis of heads perpendicular to the magnetic field direction. The fowl spermatozoa were initially influenced when magnetic field intensities were from 650 to 5700 Gauss and the highest values (70.67, 72.49 and 71.79%) were found in the 5700 Gauss treatment at one, two, and three days exposure, respectively. Although percentages of the perpendicular oriented fowl spermatozoa increased along with the enhancement of the magnetic field intensity, the degree of orientation was only significantly higher in the treatments having the magnetic field strength from 1500 to 5700 Gauss than that in the control treatment at all exposure time. In addition, the experimental results also showed that the percentages of all orientational types of fowl spermatozoa (perpendicular category including upward perpendicular and downward perpendicular and parallel type consisting of leftward parallel and rightward parallel) in all treatments tended to be stable during exposure time. From the results of this study. it is suggested that (1) the diamagnetic anisotropy of the inside structural components of fowl spermatozoa induce them to orient perpendicular to the magnetic field direction, (2) the degree of orientation increased according to the enhancement of magnetic field strengths, (3) fowl spermatozoa had not an high sensitivity to the magnetic field, and the level of perpendicular orientation of fowl spermatozoa in this study is nearly similar to that of cattle sperm in the study of Suga et al. (2000).

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.301-310
• /
• 2009

The present study analyzed empirically the structural relationship among characters, market orientation and performance of CEO's in small and medium-sized companies. The analysis showed that market orientation is affected by CEO's characters in the industry. It was also revealed from the analysis that the business performance and technical renovation of small and medium-sized companies rely fairly on their market orientation. These findings are believed to have great significance in the process of creating market orientation by the industry. That is, CEO's will may play a very important role in pursuit of market orientation and, at the same time, may act as a vital factor for small and medium-sized companies to achieve business performance and to realize technical renovation.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.2
• /
• pp.129-136
• /
• 2001

The accuracy of GPS applications is heavily dependent on the satellite ephemeris and earth orientation parameter. Specially applications like as the real time monitoring of troposphere and ionosphere require real time or predicted ephemeris arid earth orientation parameter with very high quality. IGS is producing IGS ultra rapid product called IGU for real time applications which includes the information of ephemeris and earth orientation. IGU is being made available twice everyday at 3:00 and 15:00 UTC arid covers 48 hours. The first 24 hours of it are based on actual GPS observations and the second 24 hours extrapolated. We will construct the processing strategy for yielding ultra rapid product and demonstrate the propriety through producing it using 48 hours data of 32 stations.

• KIEAE Journal
• /
• v.5 no.2
• /
• pp.35-41
• /
• 2005

This study was conducted to identify the effect of daylighting in hospitals on hospitalization time of patients and patients' outcomes in hospitals. Two major variations include orientation of hospital wards and the hospitalization times of various kinds of patients. Patients' data were obtained from two hospitals located in Seoul, Korea. The hospital buildings have north-facing and north-facing wards. The patients were classified according to the types of diseases and the orientation of the patient rooms. Then, statistical T-tests were applied in order to verify if natural light might shorter the hospitalization time of patients. The study also identified the types of diseases that were more responsive to the quantity of natural light in patient rooms. This information may be used as a basis for the development of guidelines for patient rooms in hospitals to achieve more effective healing environments. Likewise, the results may be applied to medical treatment buildings, recreational centers and hospital as well.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.11
• /
• pp.804-815
• /
• 1988

Real-time image processing algorithms to detect position and orientation of rectangular type electronic components are developed. The position detection algorithm is implemented with the use of projection method which is insensitive to noise. Also dynamic thresholding method of projection is employed in order to distinguish between the boundary of a component and any marking on the component. The orientation is determined by Hough transform of boundary candidates of a component, which is obtained a priori by a simple edge detection method. For real-time processing of both position and orientation for a component which is not aligned well, parallel processing method of image data is proposed and tested in real-time.