• Journal of Korean Academy of Nursing
• /
• v.30 no.2
• /
• pp.319-330
• /
• 2000

This study is aimed at analyzing the trend of research on the use of exercise in nursing research, through suggesting directions for future research and implementation of the various exercise therapies. Research studies were taken from dissertations and theses selected from the Academic Society Journals of nursing science, Journals from universities, medical and nursing schools, research institutes in various universities, the Central Journal of Medicine, and the New Medical Journal. The research published between 1970 and 1997 in Korea were analyzed, 51 research were selected. The research are analyzed according to: published time, source of the research, research design, subjects, sample size, dependant variables, exercise therapy, and effect of exercise therapy. The results were as follows: 1. Research on exercise therapy increased rapidly in the 1990's. At this time, 88.2% of research was published. 2. Research areas included: 54.9% non- degree research, 27.5% Doctoral theses, and 17.6% Master's theses. 3. The experimental design included: 66.7% non- equivalent control group pre-test/ post-test design and 29.4% one group pre-test/post- test design. 4. Out of the Subjects: 52.9% were patients with various health problems, and 47.1% were healthy individuals. 5. Sample size included: 52.9% with above 31 subjects, 11.8% with 11~15 and 26~30. 6. Exercise therapy was analyzed by type, intensity, frequency, duration, and period. 1) The Types: Aerobic exercise at 60.8% was the most common, active exercise for muscle strengthening and building made up 21.6%. 2) Exercise with 40~65% intensity comprised 25.5%, 70~85% with 7.8%, and no description of the intensity was 66.7%. 3) Frequency of 3~5 per week was the most common at 78.4%. 4) Duration: 15~60 minutes was the most common length of time at 76.5%. 5) Periods: More than 5 weeks at 82.3% were the most common in their categories. 7. Dependant variables: Psychological response was measured as a dependant variable in 92.2%, Cardio-pulmonary function 88.2%, Body Composition was 86.3%, Physical Response was 60.8%, Lipid Metabolism was 58.8%, Physical Strength was 49.0%, Glucose Metabolism was 25.5%, Activities of Daily Living was 17.6% and others added to be 3.9%. 8. The effect of Exercise Therapy was categorized into 'positive', 'partially positive', and 'no effect' according to dependant variables: Having a positive effect - Glucose Metabolism (93.3%), Physical Response (85.0%), Activities of Daily Living (81.8%), Psychological Response (71.6%), Lipid Metabolism (67.6%), Cardio- pulmonary Function (63.6%), Physical Strength (68.1%), and Body Composition (56.4%). The following suggestions can be made on the above findings: 1. Research findings on Exercise Therapy as a Nursing Intervention need to be described by their elements of type, intensity, frequency, duration and period. 2. Toproperly study the positive effects of Exercise Therapy, there needs to be ⑴ appropriate research design, ⑵ selection criteria for the subjects ⑶ contents of exercise prescription to individuals or groups ⑷ measurement criterion for the dependent variables. 3. Meta-analysis on exercise therapy also needs to be done to analyze and integrate the various results.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.94.2-94.2
• /
• 2013

We studied the precipitation of magnetospheric energetic electrons into the Earth's atmosphere during magnetic storm times using precipitating electron flux data from the MEPED on board the NOAA Polar Orbiting Environmental Satellites (POES) low.altitude satellite, NOAA-16. We identified a total of 84 storm events between 2001 and 2012 using SYM-H index. We have done a superposition of precipitating electron fluxes for each of three energy ranges (i.e., e1: > 30 keV, e2: > 100 keV, e3: > 300 keV) for the identified storm times. The results show that the fluxes start to increase before the main phase of storm for all energy ranges and reach a maximum level just before the time of SYM-H minimum value. The precipitation timescales are energy-dependent, being shorter for lower energy, ~4.67 hours for e1, ~7.93 hours for e2 and ~26.5 hours for e3. The precipitating fluxes decline during the recovery phase of the storms. We examined the L shell dependence of the precipitating electron flux during the main phase. We found that statistically the precipitation fluxes are dominantly seen at L of ~ 3-4 or higher. This L value roughly corresponds to the plasmapause location during the main phase. Thus the results imply that the electron precipitation mainly occurs outside of the plasmapause. In addition, we classified the storm events by their strength and examined the dependence of precipitation on storm intensity. We found that the electron precipitation occurs on a faster time scale and penetrate into inner L shell region for a stronger storm.

• The Journal of Korean Physical Therapy
• /
• v.25 no.4
• /
• pp.204-209
• /
• 2013

Purpose: Children with cerebral palsy generally have a high incidence of respiratory problem, resulted from poor coughing, airway clearance problem, respiratory muscle weakness, kyphoscoliosis and so forth. The purpose of this study is to investigate the possible factors that can be affected to forced vital capacity (FVC) in children with cerebral palsy. Methods: Total thirty six children with diplegic and hemiplegic cerebral palsy were recruited in this study. They were evaluated by general demographic data (i.e., age, gender, body mass index (BMI)) and variables related to respiratory functions (i.e., chest mobility, waist mobility, maximal phonation time, and maximum inspiratory/expiratory pressure (MIP/MEP)). The correlation between forced vital capacity and the rested variables were analyzed, and multiple regression with stepwise method was conducted to predict respiratory function, in terms of FVC as the dependent variable, and demographic and other respiratory variables as the independent variable. Results: FVC showed a significant correlation with waist mobility (r=0.59, p<0.01), maximal phonation time (r=0.48, p<0.05), MIP (r=0.73, p<0.01), and MEP (r=0.60, p<0.01). In addition, the multiple regression analysis model indicated that FVC could be predicted by the assessment of each waist mobility and MIP. Conclusion: These finding suggest that respiratory function is related to body size and respiratory muscle strength, and that BMI, waist mobility, and MIP can be predictable factors to affected respiratory function in term of FVC.

• Tunnel and Underground Space
• /
• v.27 no.5
• /
• pp.324-332
• /
• 2017

In this paper, a numerical analysis of one-dimensional viscous fluid flow in a rock joint using UDEC code is performed to evaluate the effect of design parameters on injection performance. We consider injection pressure, fluid compressibility, time dependence of yield strength and viscosity of injected grout fluid, and mechanical deformation of joint as the design parameters, and penetration length and flow rate of injection are investigated as the injection performance. Numerical estimations of penetration length and flow rate were compared to analytical solution and were well comparable with each other. We showed that cumulative injection volume can be over-estimated by 1.2 times than the case that the time-dependent viscosity evolution is not considered. We also carried out a coupled fluid flow and mechanical deformation analysis and demonstrated that injection-induced joint opening may result in the increment of cumulative volume by 4.4 times of that from the flow only analysis in which joint aperture is kept constant.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.129-134
• /
• 1994

A Laser Cutter is designed for the precise fabrications in the shipyards recently. The cutter is a gantry type one with specified functions of movability and strength in order to satisfy the workability. The gantry frame should move with a certain velocity in a relatively short time for the proper cutting of the object materials. The gantry is fitted with ball screw and the acceleration field is formed by actuating this ball screw. The relative displacement should be within the allowable design criteria to make sure the precise cutting of the materials by the laser. In this paper, modal and structural analysis for a Laser Cutter which is commonly used in the shipyards, is carried out to check the design criteria of the system. The system is modeled by placing the proper shell and soils finite elements and fictitious mass properties to represent the real one. The way how to extract the loading conditions based on the given velocity criteria of the system is presented. Static structural analysis is performed and the results came out as expected. Modal analysis for finding eigen-values and mode shapes of the system is performed and it is shown that the time dependent dynamic analysis is unnecessary for this system for its operating circumstances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.694-701
• /
• 2018

Larger crack widths can be observed more in FRP-reinforced concrete members than in steel-reinforced concrete members as a result of the lower elastic modulus and bond strength of FRP reinforcement. The ACI 440.1R-15 design guide provides equations derived as the maximum bar spacing to control the crack widths indirectly. On the other hand, it is not concerned with long-term effects on the crack control design provisions. This study provides suggestions for how to incorporate time-dependent effects into the crack width equation. The work presented herein includes the results from 8 beams composed of four rectangular and T-shaped FRP-reinforced concrete beams tested for one year under four-point bending. Over a one year period, the crack widths increased as much as 2.6~3.0 times in GFRP and AFRP-reinforced specimens and 1.1~1.4 times in the CFRP-reinforced specimens compared to steel-reinforced specimens. In addition, the average multiple for crack width at one year relative to the instantaneous crack width upon the application of the sustained load was 2.4 in the specimens with a rectangular section and 3.1 in the specimens with a T-shaped section. As a result, it is recommended conservatively that the time-dependent coefficient be taken as 2.5 for the rectangular beams and 3.5 for T-beams.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.8-15
• /
• 2019

When RC(Reinforced Concrete) structures are exposed to harsh environment, deterioration phenomenon occurs, and the corrosion in rebar due to chloride intrusion is known as representative deterioration, so called chloride attack. In this paper, chloride resistance performance of 2 years aged concrete is evaluated considering 3 levels of water to binder ratio(0.37, 0.42, and 0.47) and 2 levels of substitution ratio of fly ash(0% and 30%). Accelerated chloride diffusion coefficient tests referred to Tang's method, total passed charge tests referred to ASTM C 1202, and compressive strength tests referred to KS F 2405 are performed. With adaptation of the previous test results and the results from this study, time-dependent chloride diffusion characteristics are analyzed for each concrete. The FA(Fly Ash) concrete has higher chloride resistance performance than OPC(Ordinary Portland Cement) concrete. According to the evaluation standard of ASTM C 1202, the FA concrete has "Moderate" grade after 49 days while OPC concrete does "Moderate" grade after 365 days. As the results of time-parameter for chloride diffusion, OPC concrete and FA concrete show the decreasing behavior of time-parameters with increasing water to binder ratio. Also, FA concrete has 1.57~2.74 times of time-parameter than OPC concrete. That's cause is thought that the time-parameter indicates the gradient of decreasing of diffusion coefficient. FA concrete has higher time-parameters than OPC concrete by pozzolanic reaction of FA.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.333-352
• /
• 2017

A comparison study is made between the dynamic properties of an argillaceous siltstone and its grouting-reinforced body. The purpose is to investigate how grout injection can help repair broken soft rocks. A slightly weathered argillaceous siltstone is selected, and part of the siltstone is mechanically crushed and cemented with Portland cement to simulate the grouting-reinforced body. Core specimens with the size of $50mm{\times}38mm$ are prepared from the original rock and the grouting-reinforced body. Impact tests on these samples are then carried out using a Split Hopkinson Pressure Bar (SHPB) apparatus. Failure patterns are analyzed and geotechnical parameters of the specimens are estimated. Based on the experimental results, for the grouting-reinforced body, its shock resistance is poorer than that of the original rock, and most cracks happen in the cementation boundaries between the cement mortar and the original rock particles. It was observed that the grouting-reinforced body ends up with more fragmented residues, most of them have larger fractal dimensions, and its dynamic strength is generally lower. The mass ratio of broken rocks to cement has a significant effect on its dynamic properties and there is an optimal ratio that the maximum dynamic peak strength can be achieved. The dynamic strain-softening behavior of the grouting-reinforced body is more significant compared with that of the original rock. Both the time dependent damage model and the modified overstress damage model are equally applicable to the original rock, but the former performs much better compared with the latter for the grouting-reinforced body. In addition, it was also shown that water content and impact velocity both have significant effect on dynamic properties of the original rock and its grouting-reinforced body. Higher water content leads to more small broken rock pieces, larger fractal dimensions, lower dynamic peak strength and smaller elastic modulus. However, the water content plays a minor role in fractal dimensions when the impact velocity is beyond a certain value. Higher impact loading rate leads to higher degree of fragmentation and larger fractal dimensions both in argillaceous siltstone and its grouting-reinforced body. These results provide a sound basis for the quantitative evaluation on how cement grouting can contribute to the repair of broken soft rocks.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.421-430
• /
• 1997

In this study, the static and the fatigue tests were performed with high tension bolted joints, of which the surfaces were spread with inorganic zinc-primer after shot-blast, and milling surface, and steel-natural surface, difference of friction surface condition were examined by comparing the esults of tests. From the result of synthetical investigation of this study. it is proper that using the torque management method in order to introduce design axial force to blots, and the provision of specifications that initial axial forces must be 110% of design axial forces is proper. Decreasing ratio of axial forces to initial force is proportional to common lorgarithms of time progress, it converge constant value after 20 hours, and decreasing ratio is little related to the roughness of friction surface. Sliding coefficient of milling, spreading inorganic zinc-primer, just producting is great in order and sliding forces are dependent on the applied axial forces, but if the applied axial forces are great, sliding coefficient become small by a loss of roughness. So it is confirmed that relation between the applied axial forces and the sliding forces are not proportional linearly. From the result of estimation on fatigue strength, all specimens satisfy the specifications with B-grade and milling surface is lower than the others about 14% in fatigue strength because in milling surface lose the function of friction-types joints at lower number of cycles. From the result of eximination for the distribution area of compressive force, friction area near to inside bolt is wider in the direction of stress than near to outside. It is guessed that this situation occurs because outside bolts firstly change from the friction connection to the bearing connection.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.165-191
• /
• 1990

Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoration, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of $5{\times}5{\times}25mm$. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respecitvely. Porcelain glass transition temperatures and expansion values were derived alloy-porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal-porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated: 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than that of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly 5. Alloy-porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.