• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.133-137
• /
• 2005

A photonic RF true-time delay using a tapered chirped fiber Bragg grating coated with a heating electrode has been proposed and fabricated. For an RF signal carried over an optical signal, the time delay has been achieved by controlling the voltage applied to the electrode and thus adjusting its reflection positions from the fiber grating through the thermooptic effect. It features continuous voltage-controlled operation, requiring no mechanical perturbation and no moving parts. The measured time delay was about 120 ps with the electrical power consumption of $250{\cal}mW$.

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.1975-1987
• /
• 2005

An input time delay always exists in practical systems. Analysis of the delay phenomenon in a continuous-time domain is sophisticated. It is appropriate to obtain its corresponding discrete-time model for implementation via digital computers. In this paper a new scheme for the discretization of nonlinear systems using Taylor series expansion and the zero-order hold assumption is proposed. The mathematical structure of the new discretization method is analyzed. On the basis of this structure the sampled-data representation of nonlinear systems with time-delayed multi-input is presented. The delayed multi-input general equation has been derived. In particular, the effect of the time-discretization method on key properties of nonlinear control systems, such as equilibrium properties and asymptotic stability, is examined. Additionally, hybrid discretization schemes that result from a combination of the scaling and squaring technique (SST) with the Taylor series expansion are also proposed, especially under conditions of very low sampling rates. Practical issues associated with the selection of the method's parameters to meet CPU time and accuracy requirements, are examined as well. A performance of the proposed method is evaluated using a nonlinear system with time delay maneuvering an automobile.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.922-924
• /
• 1995

The modeling of accurate timing in storage elements of ASIC cell library was studied. The propagation delay time of clock signal affects the critical time and this can cause malfunction in the chip designed in synchronous. In this paper, an analysis on the effect of input slope of clock signal in timing modeling were carried out. For the first time, in ASIC design, the design guides that can be used in both $0.6{\mu}M$ and $0.8{\mu}m$ design rule were offered, reducing the run time of SPICE and the time of cell library development.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.326-333
• /
• 2003

In the measurement using DMA and CPC in series, there is some time delay for particles classified in DMA to detect in CPC. During this time, the DMA time-response changes due to the velocity profile of sampling tube and the diffusion of particles in the volume that exists between the DMA exit and the detector of ultra-fine CPC. This is called mixing effect. In the accelerated measurement methods like the TSI -SMPS, the size distribution is obtained from the correlation between the time-varying electrical potential of the DMA and the corresponding particle concentrations sampled in DMA. If the DMA time -response changes during this delay time, this can cause the error of a size distribution measured by this accelerated technique. The kernel function considering this mixing effect using the residence time distribution is proposed by Russell et al. In this study, we obtained a size distribution using this kernel to compare to the result obtained by the commercial accelerated measurement system, TSI -SMPS for verification and considered the errors that result from the mixing effect with the geometric mean diameters of originally sampled particles, using virtually calculated responses obtained with this kernel as input data.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.121-124
• /
• 1999

In a packet-switched wireless cellular network, a packet destined to a mobile station is queued at a base station and then broadcast over the base station's cell. When an active mobile station leaves a cell, there re-main packets which are destined to the mobile and not yet delivered to it at the cell's base station. For application which are sensitive to packet losses, such back- logged packets must be forwarded to the new base station. Otherwise, an end-to-end retransmission may be required. However, an increase in packet delay is incurred by employing the packet forward scheme, since a packet may be forwarded many times before it is delivered to the destined mobile station. For an enhanced quality-of-service level, it is preferred to reduce tile packet delay time. In this paper, we develop an analytical approximation method for deriving mean packet delay times. Using the approximation and simulation methods, we investigate the effect of network parameters on the packet delay time.

• Journal of the Korean Society of Safety
• /
• v.1 no.1
• /
• pp.33-40
• /
• 1986

The results from a study on the combustion of the ferrosilicon-miniun delay powder which was examined under the various conditions are as follows. 1. It has been found that in case of these delay powders, decomposition of oxidiging agents occurs first and then reducing agents are oxidized by the gases evolved from the oxidizing agents and by the oxygen in air. Therefore, the main reactions are heterogenous reaction and especially He gas phase plays an important role in combustion reactions of delay Powders. 2. In case the loading pressure is below 100kg per a detonator, the dispresion of burning time is large. 3. Little or no increase in humidity was observed on daily measurement during six month preservation tests. 4. The amperage of electric current for igniting the fuse head has no effect on the burning time of delay conposition itself changed in the detonator.

• Hip & pelvis
• /
• v.35 no.3
• /
• pp.206-215
• /
• 2023

Purpose: Delay in performance of hip fracture surgery can be caused by medical and/or administrative reasons. Although early surgery is recommended, it is unclear what constitutes a delayed surgery and whether the impact of delayed surgery can differ depending on the reason for the delay. Materials and Methods: A total of 269 consecutive hip fracture patients over 50 years of age who underwent surgery were prospectively enrolled. They were divided into two groups: early and delayed (time from reaching the hospital to surgery less than or more than 48 hours). Patients were also categorized as fit or unfit based on anesthetic fitness. One-year mortality was recorded, and regression analyses were performed to assess the impact of delay on mortality. Results: A total of 153 patients (56.9%) had delayed surgery with a mean time to surgery of 87±70 hours. A total of 115 patients (42.8%) were considered medically fit to undergo surgery. No difference in one-year mortality was observed between patients with early surgery and those with delayed surgery (P=0.854). However, when assessment of the time to surgery was performed in a continuous manner, mortality increased with prolonged time to surgery, particularly in unfit patients, and higher mortality was observed when the delay exceeded six days (fit: P=0.117; unfit: P=0.035). Conclusion: The effect of delay on mortality was predominantly observed in patients who were not considered medically fit, suggesting that surgical delays might have a greater impact on patients with medical reasons for delay.

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.28-40
• /
• 2007

In this paper, we proposes an idea for improved sound characteristic which decreasing a problem in previous reverberation algorism structure. To later reflection sound, proposed new reverberation structure, using a lopped and nested all-pass delay line, and it is designed to improve an natural concert hall sound. In addition, In order to have best imaginary sound effect, we extracted the factors by controlling each delay line's delay time, and we realized a proposed new algorithm by using general-purpose DSP. Through several experimental cases, we observed better effect on improvement of linear flatten and reverberation density and decreasing about colorlessness and non-linear sound at previous proposed model about impulse input.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.9
• /
• pp.720-727
• /
• 2008

Time delay effects on near-wall turbulent structures are investigated by performing a large-eddy simulation of a transient turbulent flow in a pipe. To elucidate the time delay effects on the near-wall turbulence, we selected the dimensionless acceleration parameter which was used in the previous study. Various turbulent statistics revealed the distinctive features of the delay. It was shown that the dynamic Smagorinsky model is valid to capture the alterations of the turbulence physics well. A dimensionless time for the responses of the flow quantities was introduced to give the detailed information on the delay of the nearwall turbulence. The conditionally-averaged flow fields associated with Reynolds shear stress producing events show that sweep and ejections are closely related to the delays of the turbulence production and the turbulence propagation toward the pipe center. The present study suggested that the enhanced anisotropy of the turbulence in the initial and transient stages would be a challenging problem to standard turbulence models.

• Science of Emotion and Sensibility
• /
• v.11 no.2
• /
• pp.227-234
• /
• 2008

Graphic and sounds are mainly used for presenting digital content as general. It has been reported that the reality of digital contents was improved by adding haptic factor to the contents of graphic and sounds. Therefore, various haptic system have recently been developed for implementing haptic sensation into digital contents. However, the delay of haptic display sometimes happens due to low hardware performance and causes to deteriorate reality of digital contents. The delay effect on reality has been important to be determined for presenting digital contents with haptic system. Therefore, this study is to find the effect on user's cognition of digital contents evoking both visual and haptic sensation. Eight university students performed 4 repetitive tasks of pushing cube under the two conditions of visual and haptic delay. The delay time of each condition were set 0.5, 1.0, 2.0 and 4.0 second. As the result, both haptic and visual delay were negatively influenced user's recognition while visual delay showed more dominant effect on user's recognition than haptic delay.