• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.468-473
• /
• 2008

Currently, most of the buildings have been the high-rise buildings and not only the damage for people but also loose of property have been increased significantly. Furthermore, the damage for residents in indoor is increased significantly, the law related to fire protection is not established yet. We discussed safety of evacuation according to unitary system in standard apartment. At a result, when installing the smoke ventilation system, the RSET has been achieved and delay effect for reaching time of CO and smoke area has been obtained.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.2
• /
• pp.51-60
• /
• 2016

This paper proposes a hierarchical routing algorithm for enhancing survivability of sensor nodes on WSAN. Proposed algorithm has two important parts. The first is a clustering algorithm that uses distance between sensor and actor, and remaining energy of sensor nodes for selecting cluster head. It will induce uniform energy consumption, and this has a beneficial effect on network lifetime. The second is an enhanced routing algorithm that uses the shortest path tree. The energy efficient routing is very important in WSAN which has energy limitation. As a result, proposed algorithm extends network and nodes lifetime through consuming energy efficiently. Simulation results show that the proposed clustering algorithm outperforms conventional routing algorithms such as VDSPT in terms of node and network life time, delay, fairness, and data transmission ratio to BS.

• Journal of Astronomy and Space Sciences
• /
• v.9 no.1
• /
• pp.52-68
• /
• 1992

The ionosphere in accordance with solar activity can affect the transmission of radio waves. The effect of the ionosphere on the radio wave propagation are scattering of radio waves, attenuation, angle error, ranging error, and time delay. The present study is based on the Korean ionospheirc data obtained at the AnYang Radio Research Laboratory from January 1985 through October 1989. The data are analyzed to show the daily and the annual variations of the ionosphere. The data are also used to simulate the density distribution of the Korean ionosphere following the Chapman law.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.505-508
• /
• 2006

This paper presents a new analytical approach for designing multiloop PI controllers for disturbance rejection in multivariable processes with time delay. The proposed method is based on IMC-PID design approach. To overcome a sluggish load response by dominant pole in the process, the IMC filter is modified to compensate the dominant pole effect. Based on the modified IMC filter, an analytical tuning rule for multiloop PI controller is driven by extending the generalized IMC-PID method for single input/single output (SISO) systems [1] to multi input/multi output (MIMO) systems. Simulation results show that the proposed method gives a satisfactory load performance as well as servo performance in the multiloop system.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.214-222
• /
• 2008

Bode principle is applied to carry out traffic control for rate based ATM network, which guarantees the higher buffer utilization, buffer overflow-free, and well utilization of bandwidth. The principle confirms the relationship between the threshold of buffer queue and the network bandwidth, as well as the relationship between the threshold of buffer and source input rate. Theoretic warrant of the buffer threshold is proposed. The reference range of source input rate is provided in theory, which makes the source end respond to the change of network state rapidly and dynamically, and then the effect of time delay to the traffic control is avoided. Simulation results show that the better steady and dynamic performances of networks are obtained by Bode principle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.403-405
• /
• 1999

Power transformers have a tendency of ultra-high voltage and huge capacity as power demand increases day after day. Therefore, the fault by insulation destruction gives rise to large area of power failure in huge capacity transformers. On-line predictive diagnostics is very important In power transformers because of economic loss and its spreading effect. Hence, this study presents experiments of partial discharge method using ultrasonic sensor in order to confirm the possibility of ultrasonic sensor in power transformers. It carries out the experiments of measuring delay time between ultrasonic sensor and transducer, sensitiities by temperature change of oil and by barriers inside transformers. It is also Included wave analysis by ultrasonic sensor for needle-plate electrode powered on through high-voltage equipments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.321-324
• /
• 1998

Pixel-Design Array Simulation Tool(PDAST) was used to profoundly the gate signal distortion and pixel changing capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the resistivity of gate line material on the pixel operations can be effectively analyzed. The gate signal delay, pixel charging ratio, level-shift of the pixel voltage were simulated with varying the resis5tivity of the gate line material. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.695-698
• /
• 1995

The shape and width of fuzzy membership function has an effect on performance of fuzzy controller. In this paper, fuzzy controller is proposed to improve the control performance of fuzzy controller. It has two fuzzy inference engine. The one is typical fuzzy inference engine, the other is proposed to infer optimal width of membership function in fuzzy controller from plant constant (K,T,L). To show the effectiveness of this fuzzy controller with double fuzzy inference engine, it is applied to plant (dead time + 1st order delay) with various plant constant.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.170-175
• /
• 1999

본 논문에서는 국내에서 운전 중인 한 가스터빈 출력제어 회로의 구성을 살펴보고 현장에서 취득한 자료를 근거로 하여 가스터빈의 모델과 제어기의 조정, 그리고 MW 신호 피이드백 회로에 필터의 사용효과를 시뮬레이션을 통해 살펴보았다. 전력계통의 주파수가 가스터빈 출력제어계의 시상수에 비해 상당히 빠르게 변하므로 자동 주파수 추종을 할 경우 제어계가 쉽게 불안정해진다. 이 출력제어계의 MW 피이드백 회로의 1차지연 요소를 사용하면 안정성 향상에 좋은 효과가 있으며, 이 지연요소의 시상수를 크게 할수록 안정도는 더 향상되며 Open Loop의 특성을 보이게 된다. 그러나, 주파수 추종운전이 아닌 운전원의 출력 증감발 요구에는 시간지연 없이 응답을 하여야 하므로 적절한 설정을 할 필요가 있다. 가스터빈의 연료제어 계통을 포함한 출력제어계에 순수 시간지연 요소가 없으면 피이드백 회로에 1차지연 요소를 사용하지 않는 것이 더 좋은 출력제어 응답을 나타낸다. 그러나 실제 모들 가스터빈에는 다소 시간지연 요소를 포함하고 있으므로 일반적으로 피이드백 회로에 시간지연 요소를 사용하므로써 안정성을 향상시킬 수 있다.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.73-80
• /
• 2007

Recently, the strategy of the age of limitless competition for existence of manufacturing company appears for the enhancement of productivity through the automatic system, the reduction for the cost for standardization and the decision making process for the information system. Especially the critical success factors in manufacturing company can be summarized for the establishment of production visibility through the production management, material & work-in-process management, the establish of the flexible manufacturing system for the changed order priority and the establish of the quality system for improvement of product and process quality. The existing production management systems supply only simple information about production results on real time, can delay quick decision making. And it can prevent acquiring the information about various customer needs and the communication problems with other systems. In this paper, it will show MES system, a solution for the problems of existing production management systems. And through a case study of D company, it will reveal improvement effect on shipment error using MES system and economic analysis for MES itself.