• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.73-78
• /
• 2020

In this study, a novel reactive power control scheme is proposed to supply stable reactive power to the distribution line by compensating a ripple voltage of DC link. In a single-phase system, a magnitude of second harmonic is inevitably generated in the DC link voltage, and this phenomenon is further increased when the capacity of DC link capacitor decreases. Reactive power control was performed by controlling the d-axis current in the virtual synchronous reference frame, and the voltage control for maintaining the DC link voltage was implemented through the q-axis current control. The proposed method for compensating the ripple voltage was classified into three parts, which consist of the extraction unit of DC link voltage, high pass filter (HPF), and time delay unit. HPF removes an offset component of DC link voltage extracted from integral, and a time delay unit compensates the phase leading effect due to the HPF. The compensated DC voltage is used as feedback component of voltage control loop to supply stable reactive power. The performance of the proposed algorithm was verified through simulation and experiments. At DC link capacitance of 375 uF, the magnitude of ripple voltage decreased to 8 Vpp from 74 Vpp in the voltage control loop, and the total harmonic distortion of the current was improved.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.245-254
• /
• 2021

Purpose: In order to accurately reach an underwater projectile to a target point, reliable INS and accurate arrangement of INS between master and slave INS is paramount. Unlike terrestrial and aerial environments, underwater projectile will operates in a restricted environment where location information cannot be received or sent through satellites. In this report, we review the factors affecting the transfer alignment of master and slave INS, as well as how to improve the positional error between INS through improved transfer alignment algorithms. Methods: In this work, we propose an improvement algorithm and verify it through simulation and driving test. The simulation confirmed the difference in the transfer alignment azimuth by fitting the MINS and SINS indoors, displacement in posture, and the process of transfer alignment between MINS and SINS through a driving test to confirm algorithm can improve the arrangement. Results: According to this study, reason for the error in the transfer alignment between MINS/SINS is the factors of the system where movements such as roll, pitch, yaw are not inter locked in real time due to the delay in transmit/receive system. And confirm that the improved algorithm has a desirable effect on accuracy. Conclusion: Through this work, it is possible to identify ways to improve the accuracy of underwater projectiles to reach their target points under various underwater environments and launch condition.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.33-44
• /
• 2012

This study is as to payment improvement method of additional incidental cost to be occurred upon extension of public construction time. According to the result of analysis about the cause of non-payment of additional incidental cost of construction time extension through site examples, it was found that difficulties exist in disputes & proofing over the scope of actual cost recognition, and in this regard the result of experts opinion indicated that a construction extension pre-agreement system can be executed which agrees the scope of recognition of additional incidental cost of construction time extension once the statistical standard is clear and accurate. Accordingly, in this study, by totalling multiple sites data, calculations were implemented in terms of type of construction projects, amount of constructions, period of constructions. According to the result of calculation, the element of type of construction project and construction period appears to have none direct effect to the occurrence of additional cost of construction time extension, but direct relationship was indicated related to the contract amount element. In view of above, in this study a standard additional incidental cost of construction time extension was proposed, and presented a system improvement plan to implement the construction extension pre-agreement system.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.250-260
• /
• 2021

The purpose of this study is to investigate muscle function and symmetry index during whole body vibration exercise using lower extremity training posture for throwing athletes. For throwing athletes in their 20s(6 males, 4 females, age: 24.60±0.92years, height: 177.90±7.40cm, weight: 92.90±22.97kg), lower extremity training postures with squat, carphrase, and lunge movements. Whole body vibration exercise training was performed using. Tensiomyography(TMG) variables Time Delay(Td), Time Contraction(Tc), Time Sustain(Ts) Time Relaxation(Tr), and Displacement Maximumal(Dm) in the lower extremity joint muscles(biceps femoris(BF), gastrocnemius lateral(GL), gastrocnemius medial(GM), rectus femoris(RF), tibialis anterior(TA), lateral vastus(LV), medial latissimus(ML)), were measured to compare and analyze muscle activity, muscle fatigue, and left-right symmetry. The results of the study are left RF, VL, right VM (p<.05) in Td, VM (p<.05) in Tc, GM in Ts (p<.05), left RF in Tr, and right TA (p<. 05) showed a change. Therefore, it has been proven that various whole-body vibration training is an effective exercise with changes in muscle contraction, and stability of the core is secured by symmetry of the left and right muscles. For this reason, the whole body vibration exercise will have a positive effect on rehabilitation training, and it is believed that it will be able to improve performance.

• Journal of the Korean Professional Engineers Association
• /
• v.19 no.2
• /
• pp.10-20
• /
• 1986

This paper describes a countermeasure of electric utilities and customer equipment in order to minimize an effect of sensitive electrical and electronic equipment on the voltage disturbances. After being studied, some schemes to solve were discovered. Firstly, in the electric utilities, the reduction of frequency and influence of voltage drop's time are not easy to realize because of the standpoint of effect and economy. Secondly, in the customer equipment, there are some equipment to minimize the voltage disturbances, Such as an UPSs, a noise suppressors and a power conditioners. One of them should be established on the computer control and automated systems, the electromagnetic switch of delay-release type should be adopted on the electromagnetic switch, the controlling circuit should be adopted on the variable speed motors which is being considered a countermeasure for a momentary under-voltage drops, the luminaire adhering a instantaneous restrike device should be adopted on the HID lamp. And also, the scheme of extending a setting time of relay on the undervoltage relay and the forming method of sequence which is automatic reclosing at this time of instantaneous suspension of an electric supply have been studied.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.19-29
• /
• 2003

The purpose of this study is to analyse the effect of the parking information on the waiting time using the simulation method. Stated Preference survey has been implemented to construct the parking lot choice model. A queue simulation is carried out to investigate the effect of various parking information on the waiting time. The results show that providing parking information is likely to increase the utilization of parking place and to decease the waiting time of individual vehicle. Furthermore, as the parking demand increases, the detailed and quantitative parking information such as "5 minutes delay" is more effective than qualitative parking information such as "available".

• Journal of Korean Medical classics
• /
• v.22 no.3
• /
• pp.271-289
• /
• 2009

This thesis intend to help the eastern medical doctor to understand body condition from interpretation of perspirations(汗出) in daily time cycle. The conclusion is followed. 1. In most Eastern Medical classic and clinic literatures, the time of fever and perspirations are described as a result of disease's position at human body. Following this description, in daytime the perspirations must come from the Gi phase and night time the perspirations must come from the blood phase. Because in daytime the skin pores are opening and the defensive Gi is going out to the superficial portion of the body. In night time the skin pores are shutting and the defensive Gi is going in to the five solid organs. So a sweat in daytime comes out from the Gi phase and superficial portion of the body. And in night time comes out from the blood phase and five solid organs. But in recent real clinic cases, in daytime, there are so many perspirations from the five solid organs. Comparatively, the perspirations from the superficial portion of body are very little. And in same daytime perspirations, when the heat pathogens mixed with moist, the symptom revelation time delay to the afternoon. Therefore it can be concluded that the time of perspirations are combination of disease's Gi or blood phase and characteristics of pathogens. The position of disease at human body cannot simply judge the symptom revelation time. 2. The exchange of climate following time cycle of a day effect to the condition of human body. At same time it activates or not activates the pathogens in human body. So we can consider the kinds and characteristics of pathogens by distinguishing the symptom revelation time. In general differentiation of syndromes[辨證] pathogen's kinds and location are generally judged. By understanding the characteristics of pathogen, doctor can devise more correct and delicate prescription.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.23-29
• /
• 2018

To reduce the accident rate caused by the delay of corrective action, which is common in the construction site, in order to shorten the time from correcting the existing system to the corrective action, I used a time similarity check to inform the inspectors of the problem in real time, modeling the system so that corrective action can be performed immediately on site, and studied a system that can actively cope with safety accidents. The research result shows that there is more than 90% opening effect and more than 60% safety accident reduction rate. I will continue to study more effective system combining voice recognition and deep learning based on this system.

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.2068-2076
• /
• 2005

The influence of oxygen concentration and CO$_{2}$ as diluent in oxidizer side on soot characteristics was studied by Laser Induced Incandescence, Time Resolved LII and Transmission Electron Microscopy photography in non-premixed co flowing flames. Through the comparison of TEM photographs and the decay rate of LII signal, suitable two delay times of TIRE-LII method and signal sensitivity ($\Delta$S$_{TIRE-LII/) were determined. The effects of O$_{2}$ and CO$_{2}$ as diluent in oxidizer side on soot formation are investigated with these calibrated techniques. The O$_{2}$+CO$_{2}$, N$_{2}$, and [Ar+CO$_{2}$] mixture in co-flow were used to isolate CO2 effects systematically. The number concentration of primary particle and soot volume fraction abruptly decrease by the addition of CO$_{2}$ to the co-flow. This suppression is resulted from the short residence time in inception region because of the late nucleation and the decrease of surface growth distance by the low flame temperature due to the higher thermal capacity and the chemical change of CO$_{2}$ including thermal dissociation. As the oxygen concentration increases, the number concentration of soot particles at the inception region increases and thus this increase of nucleation enhances the growth of soot particle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2603-2609
• /
• 2010

Currently at port, various trials about the improvement of operating method for raising operation efficiency of transferring equipment are made, but if the delay is occurred to quay crane due to individual team method in YT operation, the problem which even arranged YT should stop the work. Therefore, this study installed wireless location determining device within yard and measured the location of YT with real-time. Also, in order to raise the location determination effect, we converted operating method into pooling operation method and arranged YT. Through this study, we can trace the movement of YT with real-time and the work control method which anlayzes and evaluates congestion of yard objectively is prepared.