• Current Optics and Photonics
• /
• v.2 no.6
• /
• pp.563-567
• /
• 2018

We propose and experimentally demonstrate a simple tunable photonic microwave band-pass filter with high resolution using a reflective semiconductor optical amplifier (RSOA) and an optical time-delay line. The RSOA is used as a gain medium for generating cross-gain modulation (XGM) effect as well as an optical source. The optical source provides narrow spectral width by self-injection locking the RSOA in conjunction with a partial reflection filter with specific center wavelength. Then, when the RSOA is operated in the saturation region and the modulated recursive signal is injected into the RSOA, the recursive signal is inversely copied to the injection locked optical source due to the XGM effect. Also, the tunability of the passband of the proposed microwave filter is shown by controlling an optical time-delay line in a recursive loop.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.1-12
• /
• 2021

MILD(Moderate or Intense Low-oxygen Dilution) combustion has attracted attention as the clean thermal energy technology due to the lower emissions of unburnt carbon and NO_x. MILD combustion aims to enlarge the combustion reaction zone using the spontaneous ignition phenomenon of the reactants. In this study, the ignition delay time of CH₄ according to the initial temperature of reactants and the addition of CO, H₂ was investigated using a numerical approach. Ignition delay time became shorter as the increases of initial temperature and H₂ addition. But, CO addition to the fuel increase the ignition delay time. In case of H₂ addition to the fuel, the ignition delay time decreased because the higher fraction of HO₂ promotes the decomposition of methyl radical(CH₃) and produce OH radical. However, in case of CO addition to the fuel, ignition delay time inceased because a high proportion of HCO consumes H radical. There was no significant effect of HCO on the reduction of ignition delay time. Also, the increase rates of NO emissions by the addition of CO and H₂ were approximately 7% and 1%, respectively. A high proportion of NCO affects the increase in NO production rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.597-602
• /
• 2008

This paper examines the damage effect and delay time of CMOS integrated circuits device with coupling caused by high power microwaves. The waveguide and magnetron was employed to study the influence of high power micro-waves on CMOS inverters. The CMOS inverters were composed of a LED circuit for visual discernment. Also CMOS inverters broken by high power microwave is observed with supply current and delay time. When the power supply current was increased 2.14 times for normal current at 9.9 kV/m, the CMOS inverter was broken by latch-up. Three different types of damage were observed by microscopic analysis: component, onchipwire, and bondwire destruction. Based on the results, CMOS inverters can be applied to database to elucidate the effects of microwaves on electronic equipment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1025-1031
• /
• 2011

Autoignition characteristic is an important parameter for designing diesel or PCCI engines. In particular, diesel spray flames are lifted from the nozzle and the initial flame is formed by an autoignition phenomenon. The lifted nature of diesel spray flames influences soot formation, since air will be entrained into the spray core by the entrainment of air between the nozzle region and the lifted flame base. The objective of the present study was to identify the effect of heat loss on the ignition delay time by adopting a coflow jet as a model problem. Methane ($CH_4$), ethylene ($C_2H_4$), ethane ($C_2H_6$), propene ($C_3H_6$), propane ($C_3H_8$), and normal butane (n-$C_4H_{10}$) fuels were injected into high temperature air, and the liftoff height was measured experimentally. As the result, a correlation was determined between the liftoff height of the autoignited lifted flame and the ignition delay time considering the heat loss to the atmosphere.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1C
• /
• pp.67-77
• /
• 2007

Virus throttling technique, one of many early worm detection techniques, detects Internet worm propagation by limiting connect requests within a certain ratio. The typical virus throttling controls the period of rate limiter autonomically by utilizing weighted average delay queue length to reduce connection delay time without hanving a large effect on worm detection time. In the existing virus throttling research, a minimum period of variable rate limiter is fired and a turning point which is a point that the period of rate limiter has been being decreased and starts to be increased is also fixed. However, these two performance factors have different effects on worm detection time and connection delay. In this paper, we analyze the effect of minimum period and turning point of variable rate limiter, and then propose an algorithm which determines values of performance factors by referencing current traffic pattern. Through deep experiments, it is verified that the proposed technique is more efficient in respect of reducing worm detection time and connection delay than the existing virus throttling which fixed the performance factors.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.87-96
• /
• 2019

The objective of this study was to develop a general inundation modeling technique considering the effect of drainage delay in the paddy field districts. In most studies, farmland inundation simulations have been conducted using previously developed watershed models. However, the water cycle in the paddy fields has a different structure from that of the general watershed, and the effect of the drainage delay should be considered. In this study, the drainage delay algorithm was developed using water balance equation, and the inundation modeling was performed for inundation-prone paddy fields located near Doowol stream. As a result, the depth of inundation was 43.1 cm and 45.2 cm, respectively, due to the 100-year and 200-year frequency rainfall. With the operation of drainage pump ($0.1m^3/s$), inundation depths decreased by 5.8 cm and 6.0 cm, respectively, and inundation time reduced by 20 hours and 21 hours, respectively for the 100-year and 200-year frequency rainfall. The result showed that the general inundation modeling technique developed in this study could reflect the effect of drainage delay due to the rise of external water level and the flooding reduction effect by operation of drainage pump. The results of this study are expected to be useful to establish measures for damage caused by farmland inundation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.96-102
• /
• 2023

In this paper, we proposed Channel Transfer Function estimation based on Delay and Doppler Profile for underwater acoustic OFDM communication system. It improved the estimation accuracy of the channel transfer function by linear time interpolation the change of Scattered Pilot (SP) insertion frequency in the time direction and the time by Delay and Doppler profile that analyzes the multipath situation of the channel investigated the performance of interpolation by simulation and report it. Previous works is inserted SP every 4 OFDM. It was effective under the environment without multipath, but it has observed that the effect of CTF compensation has been lowered in multipath channel condition. In addition to be better when inserted SP every 2 OFDM. But the amount of sending data will be decrease. Therefore, we conducted research to improve 4 OFDM with new interpolator. A computer simulation was performed as a comparison of SP inserted every 4 OFDM, SP inserted every 2 OFDM, and 4 OFDM with new interpolator. the performance of the proposed system is overwhelmingly improved, and the performance is slightly improved even 64 QAM.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.4
• /
• pp.66-76
• /
• 1986

This study was attempted to investigate the effects of delayed compaction on the unconfined compressive strengh and dry density of Soil-cement mixtures. Soil-cement construction is a time-consuming procedure. Time-delay is known as a detrimental factor to lower the quality of soil-cement layer. A laboratory test was performed using coarse and fine weathered granite soils. The soils were mixed with 7% cement at optimum moisture content and excess moisture content in part. Socondary additives such as lime, gypsum-plaster, flyash and sugar were tried to counteract the detri-mental effect of delayed compaction. The specimens were compacted by Harvard Miniature Compaction Apparatus at 0,1,2,4,6 hors after mixing. Two kinds of compactive efforts(9 kgf and 18 kgf tamper) were applied. The results were summarized as follows: 1.With the increase of time delay, the decrease rate of dry density of the specimen compacted by 9 kgf tamper was steeper than that of the specimen compacted by 18kgf tamper. In the same manner, soil-B had steeper decreasing rate of dry density than soil-A. 2.Based on the results of delayed compaction tests, the dry density and unconfined compressive sterngth were rapidly decreased in the early 2 hours delay, while those were slowly decreased during the time delay of 2 to 6 hours. 3.The dry density and unconfined compressive strength were increased by addition of 3% excess water to the optimum moisture content during the time delay of 2 to 6 hours. 4.Without time delay in compaction, the dry densities of soil-A were increased by adding secondary additives such as lime, gypsum-plaster, flyash and sugar, on the other hand, those of soil-B were decreased except for the case of sugar. 5.The use of secondary additives like lime, gypsum-plaster, flyash and sugar could reduce the decrease of unconfined compressive strength due to delayed compaction. Among them, lime was the most effective. 6.From the above mentioned results, several recommendations could be suggested in order to compensate for losses of unconfined compressive strenght and densit v due to delayed compaction. They are a) to use coarse-grained granite soil rather than fined-grained one, b) to add about 3% excess compaction moisture content, c) to increase compactive effort to a certain degree, and d) to use secondary additives like line gypsum-plaster, flyash, and sugar in proper quantity depending on the soil types.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.123-131
• /
• 2018

Air transport industry tries to enhance punctuality, stability and amenity for customer's satisfaction. Especially airlines and airports do make an effort as the distance between these two stakeholders and passengers are close. This research has empirically discussed the relationship between duty free shop purchase of passengers and the number of flights and hours of schedule delay at the airport. According to the result, the total sales of duty free shop sales have meaningful influence on the number of flights and hours of delay. In order to decrease such an impact, close cooperation between airports and duty free shops required.