• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.589-598
• /
• 2018

To maintain safety and reliability of reactors, redundant sensors are usually used to measure critical variables and estimate their averaged time-dependency. Nonhealthy sensors can badly influence the estimation result of the process variable. Since online condition monitoring was introduced, the online cross-calibration method has been widely used to detect any anomaly of sensor readings among the redundant group. The cross-calibration method has four main averaging techniques: simple averaging, band averaging, weighted averaging, and parity space averaging (PSA). PSA is used to weigh redundant signals based on their error bounds and their band consistency. Using the consistency weighting factor (C), PSA assigns more weight to consistent signals that have shared bands, based on how many bands they share, and gives inconsistent signals of very low weight. In this article, three approaches are introduced for improving the PSA technique: the first is to add another consistency factor, so called trend consistency (TC), to include a consideration of the preserving of any characteristic edge that reflects the behavior of equipment/component measured by the process parameter; the second approach proposes replacing the error bound/accuracy based weighting factor ($W^a$) with a weighting factor based on the Euclidean distance ($W^d$), and the third approach proposes applying $W^d$, TC, and C, all together. Cold neutron source data sets of four redundant hydrogen pressure transmitters from a research reactor were used to perform the validation and verification. Results showed that the second and third modified approaches lead to reasonable improvement of the PSA technique. All approaches implemented in this study were similar in that they have the capability to (1) identify and isolate a drifted sensor that should undergo calibration, (2) identify a faulty sensor/s due to long and continuous missing data range, and (3) identify a healthy sensor.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.27-33
• /
• 2015

PURPOSES : To ensure appropriate RCC properties with sufficient strength development and workability, it is necessary to secure a proper level of consistency. It is also necessary to secure maximum dry density, which is an important factor for increasing the interaction of aggregate interlocking, leading to an augmentation of RCC strength. On the other hand, the dry density of RCC can be changed owing to the compaction conditions, water content, and particle size distribution. A Proctor test and a modified Proctor test were used for determining the optimum water content needed to achieve maximum dry density with different amounts of compaction energy. A Vebe test, on the other hand, was used for checking the level of consistency, which is important for producing a workable mixture. METHODS : To confirm the degree of compaction at various particle sizes, RCC mixtures with different sand/aggregate ratios were evaluated. The Proctor test and modified Proctor test were applied to these mixtures to check the effect of the aggregate gradation and compaction energy on the maximum dry density and optimum water content. During each test, three specimens were produced for all types of water content under each aggregate gradation. A compaction curve and the optimum water content and maximum dry density for each aggregate gradation were then obtained for both tests. The range of water content for the appropriate consistency of each aggregate gradation was determined through a Vebe test. The optimum water content was then evaluated based on this range. RESULTS : The compaction test results show that the modified Proctor test provides a higher maximum dry density and lower optimum water content compared with the standard Proctor test. For the modified Proctor test, two cases of aggregate gradation (s/a = 30% and 70%) had the optimum water contents outside of the appropriate water content range. For the standard Proctor test, on the other hand, none of aggregate gradations provided the optimum water content within the desired range. CONCLUSIONS : The modified Proctor test should be used for an RCC mixture design because it can provide adequacy between maximum dry density and consistency. Moreover, the compaction roller has become highly developed for higher compaction energy.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.156-169
• /
• 1997

This study was designed to evaluate the influences of evaporation of liquid of dental cements by drying during long term using. Zinc phosphate cement, polycarboxylate cement, and glass ionomer cement were used, and evaluated the properties as follows; consistency, setting time, film thickness, solubility, and compressive strength according to the ADA specification. The specimens of control group were made by mixing the newly opened liquid using the powder-liquid ratio recommended by the manufacturer, and the specimens of ES groups were made by mixing the 10% evaporated liquid by drying with the powder-liquid ratio recommeded by the manufacturer, and the specimens of EM group were made by mixing the 10% evaporated liquid with the powder-liquid ratio modified for standard consistency. The following conclusions were drawn ; 1. The viscosity of mixture of all kinds of cements were increased by the evaporation of liquid, especially the viscosity of glass ionomer cement were influenced significantly. 2. The amount of liquid should be increased to get a standard consistency at the using of evaporated liquid of cement, the most significant increase of liquid amount was required on Ketac-Cem. 3. The setting times were increased at both cases of mixing of evaporated liquid with powder - liquid ratio recommended by manufacturer or modifided through consistency test. 4. At an experimental group of mixing of the evaporated liquid with powder-liquid ratio recommended by manufacturer, solubility was decreased and film thickness was increased. 5. By the result of evaporation of cement liquid, the compressive strength of polycarboxylate cement was increased slightly and it of glass ionomer cement was increased, however, by the increase of amount of liquid to be possible to manipulate the compressive strength were decreased.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.3
• /
• pp.288-298
• /
• 1995

Load balancing attempts to improve the performance of a distributed computing system by transferring some of the workload of a congested site to others. A load balancing scheme that supports both the source-initiated and the server- initiated load balancing is proposed in this paper. It can model both the m/m/1 queue(no load balancing) and the m/m/n queue(perfect load balancing) as the extreme State variables are replicated into every site, and copy consistency constraints are relaxed more weakly. We propose weak copy consistency constraints which correlate the outdated state information to that of the current state. We also derive sufficient conditions under which each scheduler can guarantee the load balancing without communication Using this model, the problem of load balancing is converted to that of maintaining the consistency of states and communication overhead becomes less than that of the bidding algorithm. The scheme is simulated by event tracing, compared to the two extreme cases and the bidding algorithm. The results show that the mean response time and the number of messages are reduced by 0-35% and 40-100% respectively, compared with the bidding algorithm. Finally the effects of some system parameters are described.

• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.207-215
• /
• 2022

The latest volumetric technology's high geometrical accuracy and realism ensure a high degree of correspondence between the real object and the captured 3D model. Nevertheless, since the 3D model obtained in this way constitutes a sequence as a completely independent 3D model between frames, the consistency of the model surface structure (geometry) is not guaranteed for every frame, and the density of vertices is very high. It can be seen that the interconnection node (Edge) becomes very complicated. 3D models created using this technology are inherently different from models created in movie or video game production pipelines and are not suitable for direct use in applications such as real-time rendering, animation and simulation, and compression. In contrast, our method achieves consistency in the quality of the volumetric 3D model sequence by linking re-meshing, which ensures high consistency of the 3D model surface structure between frames and the gradual deformation and texture transfer through correspondence and matching of non-rigid surfaces. And It maintains the consistency of volumetric 3D model sequence quality and provides post-processing automation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.57-64
• /
• 2012

Multiplayer, real-time games are a kind of soft real-time systems because a game server has to respond to requests from many clients within specified time constraints. Client events have different timeliness and consistency requirements according to their nature in the game world. These requirements lead to different priorities on CPU processing. Events can be divided into different groups, depending on their consistency degree and priority. To handle these events with different priority and meet their timing constraints, we propose a priority-based group task scheduling policy in this paper. The number of clients or events requested by each client may be increased temporarily. In the presence of transient overloading, the game server needs to allocate more CPU bandwidth to serve an event with the higher priority level preferentially. The proposed scheduling policy is capable of enhancing real-time performance of the entire system by maximizing the number of events with higher priority completed successfully within their deadlines. The performance of this policy is evaluated through extensive simulation experiments.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.83-87
• /
• 2007

This research studies real time interaction and dynamic data shared through 3D scenes in virtual network environments. In a distributed virtual environment of client-server structure, consistency is maintained by the static information exchange; as jerks occur by packet delay when updating messages of dynamic data exchanges are broadcasted disorderly, the network bottleneck is reduced by predicting the movement path by using the Dead-reckoning algorithm. In Dead-reckoning path prediction, the error between the estimated and the actual static values which is over the threshold based on the shared object location requires interpolation and multicasting of the previous location by the ESPDU of DIS. The shared dynamic data of the 3D virtual environment is implementation using the VRML.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.68-73
• /
• 2001

This experiment was executed to clarify the optimum condition of reductive bleaching for 100% color papers. The reductive bleaching of the color paper was desirable to be done under such conditions as high temperature over $60^{\circ}C$ and high consistency within possibly short time. The FAS bleaching like the sodium hydrosulfite required oxygen-free condition. Especially, as the mixture between pulps and chemicals was favored in case of the high consistency, it was actively recommended. Therefore, it is desirable to control the dosage with the type of the dyes, the nature, the dye content, the paper compositions, and the targeting initial and final brightness.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.61-68
• /
• 2014

This paper reports the physical properties and hydration products of slag cement that was prepared by activating ground granulated blast furnace slag with commercial lime and plaster of Paris (POP) as activators. The consistency, setting times and soundness of various mixes of slag-lime-POP is reported. The hydration products and formation of bonds in the paste during setting were studied with the help of SEM, FTIR and XRD tests and the same are correlated to the hydration process. The setting times of the mixes are found to be lower than that of the value prescribed for ordinary Portland cement (OPC). Borax is used as a setting retarder and a borax content of 0.4 % by mass gives setting times that are normally prescribed for OPC. In the early stages of setting C-A-S-H gels are found in this cementing material instead of C-S-H gel, as generally observed in the OPC.

• Journal of Mechanical Science and Technology
• /
• v.16 no.10
• /
• pp.1264-1275
• /
• 2002

This paper is concerned with the investigation on the stability and convergence characteristics of the Crank-Nicolson-Galerkin scheme that is widely being employed for the numerical approximation of parabolic-type partial differential equations. Here, we present the theoretical analysis on its consistency and convergence, and we carry out the numerical experiments to examine the effect of the time-step size △t on the h- and P-convergence rates for various mesh sizes h and approximation orders P. We observed that the optimal convergence rates are achieved only when △t, h and P are chosen such that the total error is not affected by the oscillation behavior. In such case, △t is in linear relation with DOF, and furthermore its size depends on the singularity intensity of problems.