• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.35-43
• /
• 2001

Many speech recognition systems have used pronunciation lexicon with possible multiple phonetic transcriptions for each word. The pronunciation lexicon is of often manually created. This process requires a lot of time and efforts, and furthermore, it is very difficult to maintain consistency of lexicon. To handle these problems, we present a model based on morphophon-ological analysis for automatically generating Korean pronunciation variants. By analyzing phonological variations frequently found in spoken Korean, we have derived about 700 phonemic contexts that would trigger the multilevel application of the corresponding phonological process, which consists of phonemic and allophonic rules. In generating pronunciation variants, morphological analysis is preceded to handle variations of phonological words. According to the morphological category, a set of tables reflecting phonemic context is looked up to generate pronunciation variants. Our experiments show that the proposed model produces mostly correct pronunciation variants of phonological words. Then we estimated how useful the pronunciation lexicon and training phonetic transcription using this proposed systems.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.380-384
• /
• 2004

A fuel spiking test was performed to measure the surge margin of the compressor in a gas turbine engine. During the test, fuel spiking signal was superimposed on the engine controller demand and the mixed signals were used to control a fuel line servo-valve. For the superimposition, a subsystem composed of a fuel controller and a function generator was used. During the fuel spiking test, the original scheduled fuel signals and the modified signals were compared to guarantee the consistency excluding the spiking signals. The spiking signals were carefully selected to maintain the engine speed constant. The fuel spiking effects were checked by three dynamic pressure sensors. Sensors were placed before the servo-valve, after the servo-valve, and after the compressor location, respectively. The modulations of the spiking signal duration and fuel flow rate were examined to make the- operating point approach the surge region. The real engine test was performed at the Altitude Engine Test Facility (AETF) in Korea Aerospace Research Institute (KARI). In the real engine test, fuel spiking signals with 25~50 ㎳ of spiking signal time and 17~46 % of base fuel flow rate condition were used. The dithering signal was 5~6 ㎃ at 490 Hz. The test results showed good agreement between the fuel spiking signals and the fuel line pressure signals. Also, the compressor discharge pressure signals showed fuel spiking effects and the changes of the operating point on the compressor characteristic map could be traced.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.763-767
• /
• 2005

Effect of ${\alpha}-amylase$ and various emulsifiers on characteristics of bread dough were examined. Fungal or bacterial ${\alpha}-amylase$ and various emulsifiers including monoglyceride (MG), sodium stearoyl-2-lactylate (SSL), and diacetyltartaric acid ester of mono- and diglycerides (DATEM) were added to bread dough both individually and as mixtures. Rheological characteristics of various bread doughs were examined through falling number, farinograph, alveograph, and rapid visco analysis. Results obtained showed falling number decreased via degradation of starch by ${\alpha}-amylase$. In farinogram, addition of ${\alpha}-amylase$ and emulsifiers in dough decreased consistency, water absorption, mechanical tolerance index, and dough development time. Farinogram characteristic was improved by adding SSL+MG to dough formula. Similar to farinogram addition of ${\alpha}-amylase$ and emulsifiers in alveogram of dough decreased overpressure, extensibility, swelling index, and deformation energy. Whereas addition of ${\alpha}-amylase$ did not affect pasting temperature, viscosity of dough tended to decrease.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.21-30
• /
• 2015

The visual expression system of space realized in Baroque aesthetics is basically grounded on the philosophical view to the world of the time, that is to say the changes of the thinking system in the Renaissance and ontology based on it. Structural aesthetics in Baroque freed from Plato's system of harmony but grounded on Leibniz's process philosophy formed a crucial background to highlight the formal nature of the whole and build a structure based on the inclusive principle of formativity. Also, to solve problems to realize the order and consistency of forms from the whole, Baroque adopted the nonlinear and nonphysical formative system as the principle of building space in works of art. Combining the order system of nature in the Renaissance with manneristic dynamicity as well as formative principle taking shape geometrically, it did establish a variety of aesthetic concepts based on the results of infiniteness and exaggeration expressed from the two forces, the Renaissance and mannerism. This study has found that such Baroque aesthetics did overcome classical planeness and draw continuous mobility from the structures and forms based on that with the transborder concepts of structures, the components of space, as an ultimate system of formative expression. Moreover, this author has drawn and analyzed with the cases of the 17th-century art and architecture the transborder elements manifesting the nature of diverse formative visual elements produced in artistic expressions with that principle of aesthetics, that is the intangible concept of Baroque. Based on that, this researcher intends to come up with technical solutions to solve a lot of environmental and architectural problems we are severely facing nowadays in terms of environmental, physical, and emotional aspects with the theoretical clues and results acceptable to this contemporary era.

• Journal of KIISE:Databases
• /
• v.31 no.4
• /
• pp.409-421
• /
• 2004

A database sharing system (DSS) couples a number of computing nodes for high performance transaction processing, and each node in DSS shares database at the disk level. In case of node failures in DSS, database recovery algorithms are required to recover the database in a consistent state. A database recovery process in DSS takes rather longer time compared with single database systems, since it should include merging of discrete log records in several nodes and perform REDO tasks using the merged lo9 records. In this paper, we propose a two version caching (2VC) algorithm that improves the cache fusion algorithm introduced in Oracle 9i Real Application Cluster (ORAC). The 2VC algorithm can achieve faster database recovery by eliminating the use of merged log records in case of single node failure. Furthermore, it can improve the performance of normal transaction processing by reducing the amount of unnecessary disk force overhead that occurs in ORAC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.933-939
• /
• 2012

In general, the three-dimensional(3D) coordinates of the manufactured ship blocks are measured using the laser measuring equipment by ship engineers. But, many deflections between the measured coordinates in manufactured step and the designed coordinates in the design step are occurred because of the measuring process of ship blocks manually. Thus, the ship engineer should conform the consistency between the measured coordinates and the designed coordinates step by step, and it largely causes the loss of manpower and time. In this paper, the automated pattern matching algorithm of 3D coordinates for quality control in ship blocks is suggested in order to solve this problem, and the performance of the algorithm is analyzed using the 3D coordinates simulation software developed by our research laboratory. The coordinates matching rate of the measured coordinates in the single/multi ship block(s) is about 90.2% under the tolerated distance error range is 20~25cm.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.121-136
• /
• 1991

The focal mechanism of the Hongsung Earthquake (1978. Oct. 7, M$_L$=5.0, Latitude 36.62N, Longitude 1 26.67E) was evaulated using the polarity distribution of the P-Waveforms. Through the non-linear computer process, the compatibility of polarity distributions of the 9 P-Waveforms observed at teleseismic distances from the Hongsung Earthquake epicenter was investigated to those of the focal mechanism determined from the varying strike, dip and rake angles. The resultant values for the strike and dip angle of the principal fault plane, which apparently matches very well the sunface lineament of the Hongsung region, are determined to be about 247 degree and 78 degree with uncertainties, respectively. However, the rake angle of the focal mechanism has wide range of 40 degree to 160 degree, which is mainly due to the poor coverage of the azimuthal angle of the observed seismic stations. Due to the consistency of principal stress axes, the resultant focal mechanism could support the current stress regime of that region, which may be caused by subduction of the Pacific Plate under the Eurasia Plate along the Japan Trench. It also provides information of seismic source characteristics of the part of the Korean Peninsula for aseismic design criteria such as Site Specific Response Spectrum and Strong Ground Motion Time History for the nuclear power plants and related nuclear waste disposal facility sites.

• Korean Journal of Community Nutrition
• /
• v.13 no.3
• /
• pp.426-438
• /
• 2008

The purpose of this study was to examine bowel habits, dietary habits, and nutrient intake of constipated adults, and the effects of prune products on relieving constipation symptoms. Fifty one adults with self-reported constipation (mean age 23 years, range 19-41 years, 10 males and 41 females) participated in this study. After a baseline survey on bowel habits and dietuy habits, participants were asked to consume at least 50 g of prune and 200 ml of prune juice per day during a 4-week period in addition to usual diet. Nutrient intake was estimated by a 24 hour recall at the baseline and once every week by diet records during the intervention. Data were analyzed after classifying the subjects into mild constipation group and severe constipation group by the severity of the symptoms. During the intervention, the subjects with mild constipation consumed 56 g of prunes (about 5.6 fruits) and 200 ml of prune juice, and the subjects with severe constipation consumed 59 g of prunes (about 5.9 fruits) and 207 ml of prune juice. Average intakes of energy, dietary fiber and water of the subjects in the mild constipation and severe constipation group increased during the intervention compared to the baseline. Average dietary fiber intake of the mild constipation and severe constipation groups significantly increased from 12.5 g and 11.6 g at the baseline to 18.5 g and 16.8 g after consuming prune products, respectively. These changes were accompanied by an increase in the number of bowel movements, a decrease of defecation time, a change to a softer stool consistency, and a decrease of abdominal pain during defecation. Seventy two subjects answered that prune products were effective to improve their overall constipation symptoms. Our data show that supplementation of prune products is effective to provide energy, dietary fiber and water, and to relieve constipation symptoms for constipated adults.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1089-1097
• /
• 2016

It is well-known that, if additional information other than a plaintext-ciphertext pair is available, breaking the RSA cryptosystem may be much easier than factorizing the RSA modulus. For example, Coppersmith showed that, given the 1/2 fraction of the least or most significant bits of one of two RSA primes, the RSA modulus can be factorized in a polynomial time. More recently, Henecka et. al showed that the RSA private key of the form (p, q, d, $d_p$, $d_q$) can efficiently be recovered whenever the bits of the private key are erroneous with error rate less than 23.7%. It is notable that their algorithm is based on counting the matching bits between the candidate key bit string and the given decayed RSA private key bit string. And, extending the algorithm, this paper proposes a new RSA private key recovery algorithm using a generalized probabilistic measure for measuring the consistency between the candidate key bits and the given decayed RSA private key bits.