• 한국전자통신학회논문지
• /
• 제7권3호
• /
• pp.559-566
• /
• 2012

본 논문에서는 프랙털 영상 부호화시 부호화 시간이 장시간 소요되는 단점을 보완하기 위한 고속 프랙털 영상 부호화 알고리즘을 제안하고, 그 알고리즘의 성능을 기존의 방법과 비교 분석하였다. 기존의 프랙털 영상 부호화 방식은 원 영상을 축소하여 비교될 영상으로 만들고, 축소된 영상에 대한 원 영상의 축소변환의 고정점을 얻기 위해 축소된 영상의 전체 영역을 탐색함으로써 많은 부호화 시간이 소요되었다. 그러나 제안한 알고리즘은 스케일링과 탐색영역제한 방식을 이용하여 부호화 시간을 대폭 단축시켰다. 그 결과로서 Jacquin 방법과의 비교 시 제안한 알고리즘은 수십배 이상의 부호화 시간을 단축시켰으며, 복원된 영상의 화질은 다소 감소하고 압축률은 약간 증가하였다. 따라서 제안한 알고리즘이 기존의 방법들에 비해 부호화 시간 면에서 크게 향상되었음을 확인할 수 있었다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 추계학술발표회논문집
• /
• pp.7-10
• /
• 1984

In this paper, the advantages of buffer insertion access method in comparison with other access methods to local area networks are analyzed. Sending and Receiving protocols in a data link layer are designed by a software method, We have derived both qeueing delays and the response time for the performance model that is proposed in this paper, and using the computer simulation, analyzed the performance for the proposed model in terms of the throughput rate- response time characteristrics. Based on the proposed model, the hardware design is implemented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.188-194
• /
• 2000

This study is about fault detection and fault area detection of LV circuit in Cab Cubicle system which have control of train to keep safety in High Speed Train. LV circuit is operated with diagnosis system like safety system. In this paper, we suggest a design and an implementation method to detect fault or to detect fault area automatically about LV circuit. The implemented system is tested successfully after implementation of some function. We expect reduction to diagnosis area or repair time by fault area module

• 디지털산업정보학회논문지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2021

In this paper, to expand the use of standalone street lights, an algorithm for controlling LED energy consumption was proposed. The proposed method uses an LED module of a standalone street light divided into n zones. This is a method of reducing total power consumption by preventing the increase in power consumption due to high heat generation by weakly operating the entire LED according to the illuminance. When the amount of sunlight decreases, the whole LED operates weakly and then brightens, and unlike streetlight that act as streetlight, a method of dividing LEDs by area and limiting the number of LEDs operating according to illumination intensity was proposed. This is a way to use a lot of time with limited battery capacity by reducing the generation of heat that consumes the most power in streetlight. It is also a method of continuously changing the initial usage area to improve the total usage time of the LED substrate. As a result of the experiment, it was found that the proposed method extends the service time because it generates less heat than the conventional stand-alone streetlight.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권5호
• /
• pp.949-966
• /
• 2013

Recently, Wireless Body Area Network (WBAN) has promise to revolutionize human daily life. The need for multiple sensors and constant monitoring lead these systems to be energy hungry and expensive with short operating lifetimes. In this paper, we offer a review of existing work of WBAN and focus on energy-aware management in it. We emphasize that nodes computation, wireless communication, topology deployment and energy scavenging are main domains for making a long-lived WBAN. We study the popular power management technique Dynamic Voltage and Frequency Scaling (DVFS) and identify the impact of slack time in Dynamic Power Management (DPM), and finally propose an enhanced dynamic power management method to schedule scaled jobs at slack time with the goal of saving energy and keeping system reliability. Theoretical and experimental evaluations exhibit the effectiveness and efficiency of the proposed method.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.29-36
• /
• 2015

In this paper, we propose the horizontal line detection using the Haar-like features and linear regression in infrared images. In the marine environment horizon image is very useful information on a variety of systems. In the proposed method Haar-like features it was noted that the standard deviation be calculated in real time on a static area. Based on the pixel position, calculating the standard deviation of the around area in real time and, if the reaction is to filter out the largest pixel can get the energy map of the area containing the straight horizontal line. In order to select a horizontal line of pixels from the energy map, we applied the linear regression, calculating a linear fit to the transverse horizontal line across the image to select the candidate optimal horizontal. The proposed method was carried out in a horizontal line detecting real infrared image experiment for day and night, it was confirmed the excellent detection results than the legacy methods.

• Journal of Communications and Networks
• /
• 제8권3호
• /
• pp.297-305
• /
• 2006

High-rate wireless personal area network (HR-WPAN) has been standardized by the IEEE 802.15.3 task group (TG). To support multimedia services, the IEEE 802.15.3 TG adopts a time-slotted medium access control (MAC) protocol controlled by a central device. In the time division multiple access (TDMA)-based wireless packet networks, the packet scheduling algorithm plays a key role in quality of service (QoS) provisioning for multimedia services. In this paper, we propose an adaptive cross-layer packet scheduling method for the TDMA-based HR-WPAN. Physical channel conditions, MAC protocol, link layer status, random traffic arrival, and QoS requirement are taken into consideration by the proposed packet scheduling method. Performance evaluations are carried out through extensive simulations and significant performance enhancements are observed. Furthermore, the performance of the proposed scheme remains stable regardless of the variable system parameters such as the number of devices (DEVs) and delay bound.

• 제어로봇시스템학회논문지
• /
• 제12권4호
• /
• pp.346-352
• /
• 2006

In a networked control system (NCS), time delays which are larger than one sampling period can change the control period. As a result, it may cause system instability. This paper presents a control method for an NCS using the controller area network (CAN), where time delays arise in the control loop. Specifically, a simple yet efficient method is proposed to improve control performance in the presence of time delays. The proposed method, which can be regarded as a gain scheduling method, selects a suitable LQ control gain among several gains to deal with the problems due to the change of control period. It is found that the gain can be scheduled in terms of the relation between the gain and the sampling period, which is represented by first-order algebraic equations. The proposed method is evaluated with an inverted cart pendulum system where the actuator and sensors are connected through the CAN. Experiment results are presented to show the efficiency of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.229-231
• /
• 2007

The CCTV, closed circuit television, system is the most popular method to monitor some specific area. The CCTV-based monitoring system is composed of a lot of cameras installed the areas, and monitors to display the vision through the cameras. However, these systems have limitations to prevent some problems or to cope with the problems promptly, because they can carry out only the function that shows us the analogue images of the cameras. Especially, urban transit service area is the space where many people crowd in all at the same time and the space is not only wide but also distributed sporadically. This paper presents the efficient plan for video-based monitoring system to monitor urban transit service area. To build the efficient monitoring system, it is necessary to devide the monitoring area to appropriate sectors that should be composed to be displayed at a time. If the proposed method is used to construct the video-based monitoring system, the operating officers in the urban transit have the more direct and real images.

• 한국정밀공학회지
• /
• 제24권7호
• /
• pp.60-68
• /
• 2007

This paper presents an efficient 5-axis roughing method for centrifugal impeller. The efficient roughing is minimization of cutting time through minimizing tool tilting and rotating motions. To minimized cutting time, machining area is divided into sub-cutting regions using control points on hub curves and shroud curves of blade used to design and analyze centrifugal impeller. For sub-cutting regions, diameters of cutting tools are determined as big as possible. Then, tool paths are generated with the tilting axis and rotating axis of 5-axis machine limited and fixed, which can give more efficient machining speed and machining stability than the conventional methods. Experimental results show that the proposed method is more efficient than the conventional methods to mill with the only one cutting tool without dividing area and the previous methods to mill with simultaneous 5-axis processing with dividing area.