• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.99-102
• /
• 2002

We fabricated TMR devices which have doubly oxidized tunnel barrier using plasma oxidation method to form homogeneously oxidized AlO tunnel barrier. We sputtered 10 $\AA$-bottom Al layer and oxidized it with oxidation time of 10 sec. Subsequent sputtering of 13 $\AA$-Al was performed and the metallic layer was oxidized for 50, 80, and 120 sec., respectively. The electrical resistance changed from 500 Ω to 2000 Ω with increase of oxidation time, while variation of MR ratio was little spreading 27∼31 % which is larger than that of TMR device of ordinary single tunnel barrier. We calculated effective barrier height and width by measuring I-V curves, from which we found the barrier height was 1.3∼1.8 eV sufficient for tunnel barrier, and the barrier width (<15.0 $\AA$) was smaller than physical thickness. Our results may be caused by insufficient oxidation of Al precursor into A1$_2$O$_3$. However, doubly oxidized tunnel barriers were superior to conventional single tunnel barrier in uniformity and density. Our results imply that we were able to improve MR ratio and tune resistance by employing doubly oxidized tunnel barrier process.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.34-41
• /
• 2002

In the conventional rake receiver structure for the IS-95 CDMA system, each finger has its own time-deskew buffer or FIFO that aligns the multipath signals to the same timing reference in order to combine symbols. This architecture is not a burden to the rake receiver design mainly because of the small number and size of the buffers. However, the number and size of the buffers are significantly increased in the cdma2000 system which adopts multiple carriers and the small spreading gain for a higher rate in data services. In order to decrease the number of buffers, we propose a new model of the time-deskew buffers, which combines the symbols as well as realigns them at the same time. Our architecture reduces the hardware complexity of the buffers by about more than 60% and 70% compared with the conventional one when we consider each rake receiver has three and four independent fingers, respectively. Moreover, the proposed algorithm is very useful not only to the cdma2000 rake receiver but also to the receiver with many fingers in order to increase the BER performance.

• Microbiology and Biotechnology Letters
• /
• v.33 no.2
• /
• pp.148-153
• /
• 2005

Malaria is a re-emerging infectious disease that is spreading to areas where it had been eradicated, such as Eastern Europe and Central Asia. To avoid the mortality from malaria, early detection of the parasite is a very important issue. The peripheral blood smear has been the gold standard method for the diagnosis of malaria infection. Recently, several other methods have been introduced for quantitative detection of malaria parasites. Real time PCR that employs fluorescent labels to enable the continuous monitoring of PCR product formation throughout the reaction has recently been used to detect several human malaria parasites. 18S rRNA sequences from malaria parasites have been amplified using Taqman real time PCR assay. Here, a SYBR Green-based real time quantitative PCR assay for the detection of malaria parasite-especially, Plasmodium vivax - was applied for the evaluation of 26 blood samples from Korean malaria patients. Even though SYBR Green-based real time PCR is easier and cheaper than Taqman-based assay, SYBR Green-based assay cannot be used because 18S rRNA cannot be specifically amplified using 1 primer set. Therefore, we used DBP gene sequences from Plasmodium vivax, which is specific for the SYBR Green based assays. We amplified the DBP gene from the 26 blood samples of malaria patients using SYBR Green based assay and obtained the copy numbers of DBP genes for each sample. Also, we selected optimal reference gene between ACTB and B2M using real time assay to get the stable genes regardless of Malaria titer. Using selected ACTB reference genes, we successfully converted the copy numbers from samples into titer, ${\sharp}$ of parasites per microliter. Using the resultant titer from DBP based SYBER Green assay with ACTB reference gene, we compared the results from our study with the titer from Taqman-based assay. We found that our results showed identical tendency with the results of 18S rRNA Taqman assay, especially in lower titer range. Thus, our DBP gene-utilized real time assay can detect Plasmodium vivax in Korean patient group semi-quantitatively and easily.

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.852-862
• /
• 2008

The purpose of this paper is to find how to do the width of skirt and the girth of the waist in the adequate pattern making for the obese women's skirt. Appearance test of the five experimental skirts was evaluated by the four experts in clothing construction. At the same time, 3D clothing air volume was observed for the five types of experimental skirt with different size specifications. The results from the appearance test were as follows; when the width of skirt pattern is set for(the shell girth/2), it was suggested w/4+1(front), w/4(back) for girth of the waist. On one hand, in case of (the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front)/2 and(waist girth of back)/2 for obese women's skirt with the best appearance. As results, it was found that the width of skirt pattern for the obese women should be the greatest shell girth instead of hip girth. In the case of the hip girth, the amount of ease on hip was suggested 6cm. It was found that pattern with the wrinkle of ease was full of the gaps between body and skirt in 3D clothing air volume. In spreading out to 2D flat pattern from 3D scan data, when the width of skirt pattern was set for(the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front/2)+(the waist girth of back/2) than the shell girth/2 in girth of the waist for the best appearance. And the conversion of 3D scan data into 2D flat pattern in curve shape of crosswise had to spread out of the plane in straight line. The obese women's clothing should be manufactured with systematical consideration of the diversity and scarcity of the obese women's body shape.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.10-15
• /
• 2009

In this paper, we propose a frequency-domain tone interference cancellation algorithm for direct-sequence spread spectrum systems. In the previously proposed frequency-domain interference cancellation algorithms, the interference signal is estimated and compensated in the frequency-domain and then, with IFFT (inverse Fourier transform), the compensated frequency-domain signal is transformed to the time domain signal for the remaining receiver operations. Unlike the previous works, the proposed algorithm does not requires IFFT and thus, the proposed algorithm not only shows the virtually identical performance but also requires lower hardware complexity compared to the previous works.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.10
• /
• pp.1559-1570
• /
• 2008

Since brought into from the economic life of nomads, the felt, the target of this study, has been developed in various ways of giving the functions of class symbol as well of protection against the cold and of ornamentation. Therefore, the study on how the felt was developed in Joseon Dynasty and how different culture from nomadic tribes it formed is significant in comprehensively under,;landing the economic, social and natural environmental factors in the Dynasty. The felt named "Jeon" has been constantly appearing in Korea from the ancient time, but it was not produced actively in the early part of Joseon Dynasty. That's why it was not a climatic condition suitable for sheep-breeding, and the government managed sheep-breeding but it aimed primarily at not producing clothing materials but having memorial ceremonies. Since sheep-breeding was not widely spreaded, production of Jeon was limited and some part was imported from China, so it was one of rare valuable goods. Therefore, the felt of wools named "Yangmojeon", the colored felt named "Chaejeon", etc. were used as liking items in the high-class society, and their materials and components were a little different depending on the official post. On the other hand, people in the low-class society used to wear the felt hats made of cattle feathers and miscellaneous fur, named "Jeonlip" and "Beougeoji". Since the middle of Joseon Dynasty, use of the felt was divided into two groups according to the users and the function, along with successful spreading of cotton and development of market economy. The function of Jeon to protect against the cold was replaced by cotton, but the felt hats of Beongeoji, Jeonlip, etc. were worn by common people continuously. As seen above, it is considered that the felt culture in Joseon Dynasty was formed very differently from the nomadic culture, because of its historical and sociocultural characteristics, and it had unique developing progress among all available fabrics.

• Journal of the Korean Society of Costume
• /
• v.64 no.2
• /
• pp.113-125
• /
• 2014

Creative thinking requires an ability to draw ideas on the given topic in a given time period with concentration. For this, the development process of design concept on the topic was collected through experiments and interviews targeting 10 fashion education experts and 10 clothing majors. After the analysis, the results are as follows: First of all, divergent thinking was done to find as many ideas and possibilities as possible at the step of expanding the topic by analogy. This showed characteristics of spreading thoughts through the spread of lexicon to professional field knowledge of learned, individual's cultural background, other art fields. Second, abstracted and designed words that are expanded and listed by the topic analogy were specified the topic gradually through the free combination method between lexicons. The sentences made by the combination of lexicons were interpreted through the serial listing method, in which the connection between sentences had the meaning of orderly cause and effect form, and the parallel listing method that treated information at once. Third, the few characteristics of the procedure that visualizing into the specific design are as follows. Firstly, the method to transform image that lexicon has into the one appropriate to the topic, the case that reflects external characteristics of selected designed word, and the case which reflects as the extrinsic expression of personal immanent and tactic desires. This study has its means to propose methods and directions to help create more creative and systematic ideas by analyzing the characteristics that appeared during the process of thinking language-oriented design.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.241-257
• /
• 2003

XML is a global standard for the Internet and e-business, and its use is growing in proportion to the spreading speed of e-Commerce. Thus, a policy for providing more safe security service for exchanging e-documents within e-Commerce is necessary. XKMS, one of XML security specification, defines the protocol for distributing and registering public keys for verifying electronic signatures and enciphering e-documents of e-Commerce applications with various and complicate functions. In this paper, we propose X-KISS service reference model and implement service component based on standard specification. Also describes the analysis and security of XML key information service for safe e-Commerce, paying attention to the features of XML based security service. This reference model supported include public key location by given identifier information, the binding of such keys to identifier information. The client service component controls the number of locate threads and validate threads to analyze the minimum requirements of real-time key retrievals. This service modeling offers the security construction guideline for future domestic e-business frameworks.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2017

As the convergence technology is developing rapidly and the portable mobile devices are spreading in ubiquitous smart healthcare, users were able to get medical information easily through the smart health platform. According to such rapid industrialization, wellness care, aging society, information society, changes in disease aspects and life style, user-centered healthcare, and health promotion contents are being offered. In this study, we proposed the mining based mental health and blood pressure management service for the smart health. The proposed method provides the mental health management service and the blood pressure management service for chronic disease patients within the mining based smart health platform. Users receive optimized healthcare services regardless of time and place in the PHR based smart health platform. For the performance evaluation of the proposed mining based mental health and blood pressure management service, F-measure verification are conducted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.743-750
• /
• 2019

Most of the water supply facilities that use rivers as sources do not have monitoring facilities such as precipitation and stream flow measurement, and there is no judgment standard for drought response such as water intake control in river flow during dry season. In addition, it was confirmed that local government officials, who deal with actual drought work, have limitations in applying the drought index (SPI, PDSI, etc.) and diffusion models that have been proposed so far in advance. Therefore, in this study, the drought prediction system was constructed to determine the number of water-intake available days using SWAT (Soil and Water Assessment Tool) and the water supply network from the intake source to the beneficiary area, suggesting the drought spreading time and space.