• Membrane Journal
• /
• v.16 no.4
• /
• pp.294-302
• /
• 2006

Silver polymer electrolytes are very promising membrane materials for the separation of olefin/paraffn mixtures. Olefin molecules are known to be transported through reversible complex formation with silver ions entrapped iii polymer matrix. However, they have poor long-term stability, which is very important fur the industrial application; the selectivity through the membrane decreases gradually with time mostly due to the reduction of silver ions ($Ag^+$) into silver nanoparticles ($Ag^0$). In this study, the stability of silver polymer electrolyte was investigated for poly(vinyl pyrrolidone) (PVP) and $AgBF_4$ system containing a surfactant, i.e. $C_{18}H_{35}(OCH_2CH_2)_{20}OH$ (Brij98) as a stabilizer. The reduction behavior of silver ions to silver nanoparticles in PVP was also investigated by atomic force microscopy (AFM) and UV-visible spectroscopy. It was found that the growth of silver nanoparticles was slower and selectivity of polymer electrolyte for propylene in propylene/propane was maintained longer time when Brij98 was added as a stabilizer.

• Clean Technology
• /
• v.27 no.4
• /
• pp.277-290
• /
• 2021

A supercapacitor, also called an ultracapacitor or an electrochemical capacitor, stores electrochemical energy by the adsorption/desorption of electrolytic ions or a fast and reversible redox reaction at the electrode surface, which is distinct from the chemical reaction of a battery. A supercapacitor features high specific power, high capacitance, almost infinite cyclability (~ 100,000 cycle), short charging time, good stability, low maintenance cost, and fast frequency response. Supercapacitors have been used in electronic devices to meet the requirements of rapid charging/discharging, such as for memory back-up, and uninterruptible power supply (UPS). Also, their use is being extended to transportation and large industry applications that require high power/energy density, such as for electric vehicles and power quality systems of smart grids. In power generation using intermittent power sources such as solar and wind, a supercapacitor is configured in the energy storage system together with a battery to compensate for the relatively slow charging/discharging time of the battery, to contribute to extending the lifecycle of the battery, and to improve the system power quality. This article provides a concise overview of the principles, mechanisms, and classification of energy storage of supercapacitors in accordance with the electrode materials. Also, it provides a review of the status of recent research and patent, product, and market trends in supercapacitor technology. There are many challenges to be solved to meet industrial demands such as for high voltage module technologies, high efficiency charging, safety, performance improvement, and competitive prices.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.217-222
• /
• 2022

It is very important to analyze the OCV change behavior during the open circuit potential holding (OCV holding) process, which accelerates the evaluation of the electrochemical durability of the PEMFC membrane. In this study, an empirical formula using the experimental data of three MEAs with different durability was created and compared. The durability evaluation time of the reinforced membrane MEA without radical scavenger inside the membrane was 383 h, and the durability evaluation time of the reinforced membrane MEA with radical scavenger inside the membrane was 1,000 and 1,650 h, respectively. The degradation of the membrane was divided into the reversible degradation that can be recovered by activation and the irreversible degradation that is not recovered. The irreversible degradation of the membrane was indicated by an increase in hydrogen permeability, and the change in hydrogen permeability was similar to the irreversible degradation constant c of all three MEAs. The initiation of irreversible deterioration without recovery is indicated by an increase in hydrogen permeability, and the OCV is not recovered due to an increase in hydrogen permeability, so the slope of the OCV recovery line (ORL) decreases, which can be confirmed by an increase in the constant c value of the empirical formula.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2019

A macroporous Sn thick film as a high capacity negative electrode for a lithium ion secondary battery was prepared by using a chemical etching method using nitric acid for a Sn film having a thickness of $52{\mu}m$. The porous Sn thick film greatly reduced the over-voltage for the alloying reaction with lithium by the increased reaction area. At the same time. The porous structure of active Sn film plays a part in the buffer and reduces the damage by the volume change during cycles. Since the porous Sn thick film electrode does not require the use of the binder and the conductive carbon black, it has substantially larger energy density. As the concentration of nitric acid in etching solution increased, the degree of the etching increased. The etching of the Sn film effectively proceeded with nitric acid of 3 M concentration or more. The porous Sn film could not be recovered because the most of Sn was eluted within 60 seconds by the rapid etching rate in the 5 M nitric acid. In the case of etching with 4 M nitric acid for 60 seconds, the appropriate porous Sn film was formed with 48.9% of weight loss and 40.3% of thickness change during chemical acid etching process. As the degree of etching of Sn film increased, the electrochemical activity and the reversible capacity for the lithium storage of the Sn film electrode were increased. The highest reversible specific capacity of 650 mAh/g was achieved at the etching condition with 4 M nitric acid. The porous Sn film electrode showed better cycle performance than the conventional electrode using a Sn powder.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.4
• /
• pp.298-305
• /
• 2015

Stem cell-like tumor cells are reported to be the main reason for tumor recurrence and metastasis. As one of the new approaches to overcome cancer, studies are emerging to inhibit the expressions of stem cell transcriptional factors (Oct4, Sox2, Klf-4, and Lin28) in cancer cells. MicroRNAs are master genetic regulators that can control development and differentiation of stem cells. In this study using various ovarian tumors (Skov3, Ovcar3, Tov112D, Tov21G, PA-1 and Hsc832(c)T), we examined the expressions of stem cell-related transcription factors, and the biological changes in cell survival and growth by miR-126 that targets stem cell transcriptional factors. We observed that treatment of miR-126 induced the morphological changes and cell suspension in most cells. In addition, miR-126 induced gradual regression of cell division except Skov3 cells, especially significant time-dependent reduction in Tov112D, Tov21G and PA-1. When we examined the expression of stem cell transcriptional factors, Sox2 was shown to be down-regulated after miR-126. Our results demonstrate that miR-126 treatment can provide the reversible environment to regulate cell division and to induce cell death of ovarian tumors, suggesting the molecular biological clues for clinical usage.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.2
• /
• pp.49-56
• /
• 2001

Benzene, one of the aromatic hydrocarbons, can be degraded by physical, chemical and biological processes in aquifers. This study aimed at analyzing separately the three different forms of degradation by performing column tests. Column tests using KCl and benzene as tracers were conducted for four different cases: 1) no hydrogen peroxide and no microorganism, 2) hydrogen peroxide only; 3) microorganism only; 4) hydrogen peroxide and microorganism to investigate the sorption and degradation of benzene. The observed BTCs of KCl and benzene in all cases showed that the arrival times of the peaks of both tracers coincided well but the peak concentration of benzene was much lower than that of KCl. This reveals that a predominant process affecting the transport of benzene in a sandy soil is an irreversible sorption and/or degradation rather than retardation. Decay of benzene through sorption and degradation increased with the addition of hydrogen peroxide and/or microorganism. Dissolved oxygen decreased with the increase of benzene in all cases indicating that degradation of benzene was also influenced by dissolved oxygen. For BTCs with the addition of microorganisms (case 3 and case 4), microorganism showed much lower concentrations compared to the initial levels and an increasing tendency with time although concentrations of benzene returned to zero, indicating a possible retardation of microorganism due to reversible and irreversible sorption to the particle surfaces.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.25-32
• /
• 2010

The yellowing is always occurred phenomena in epoxy restoration material of antic-ceramics. For re-restoration of remains with epoxy restoration material, the epoxy elimination step is the first one in all course of restoration In this paper, the chemically elimination treatments methods of epoxy in various antic-ceramics were discussed. We fabricated the epoxy elimination material for antic-ceramics restoration which were made up Dichloromethane and Dichlormethane based Dimethylformamide solution. Dichloromethane and Dichloromethane + Dimethylformamide mixture were applied to epoxy in various antic-ceramic sample. Particularly, Dichloromethane + Dimethylformamide solution had the best result in variation of color change, gloss, vending strength, weight, exfoliation time test after deposition in this solution. Dichloromrthane had the volume increase characteristics for epoxy material and Dimethylformamide had the mollification ones. So, Dichloromathane increased exfoliation in approximal surface of the epoxy material and antic ceramic, and Dimethylformamide decreased the surface hardness of epoxy. In this result, epoxy material even inside of ceramic that have very weak inside bonding is adaptable and stable eliminated. And in order to show the perfect elimination of this material, we successfully dissolve the epoxy restoration material in one antic pottery that is in one university museum's possession using this mixture. So, there is guarantee in the eternity and stabilization of restoration for antic-ceramics.

• Applied Microscopy
• /
• v.23 no.1
• /
• pp.139-163
• /
• 1993

Background: It has been well established and is now no longer a controversial issue that ischemia produces a series of inflammatory reactions and the ischemic myocardium cannot survive without adequate restoration of coronary flow, ie, reperfusion. Nevertheless, controversies that intravascular pluggings (IVP) by polymorphonuclear leukocytes (PMNs) or platelets may cause contractile dysfunction in ischemia and even in repefusion still remain. Accordingly, we attempted to examine the intravascular plug fomation as well as the ultrastructural changes in myocytes and microvessels and to determine the relation among them. Methods: 1) Human (n= 10, 39-63 years of age; 3 females and 7 males): left ventricular myocardium (LVM) was biopsied from chronic ischemic heart disease patient during bypass surgery. 2) Calf (Holstein-Friesian species, n=4): Circumflex branch of the left coronary artery (LCx) was occluded (ischemia) for 45 minutes and recanalized (reperfusion) for 3 and 6 hours, respectively and LVMs were biopsied after occlusion and recanalization, respectiverly. 3) Rat (Sprague-Dawley species, n=20): Left coronary artery (LCA) was occluded for 20 minutes and recanalized for an hour as the method described by Selye et al., (1960) and hearts were removed after occlusion and recanalization, respectively. 4) Pig (landrace type, n=7): Anterior ascending branch of the left coronary artery (LAD) was coccluded for 45 minutes and recanalized for 2 hours and LVMs were biopsied after occlusion and recanalization, repectively. All of the LVMs were routinely prepared for transmissiom electron microscopy. Rseults: In human, most of the LVM showed irreversible ultrastructural changes in myocytes and frequent IVPs by PMNs or platelets without any significant correlation with age or sex. In the animal LVM, myocytes showed reversible ultrastructural changes with slight variations in accordance with the species, duration of ischemia and reperfusion or site of biopsy, however, injuries were more severe in the subendocardial myocytes and IVPs by PMNs or platelets were frequently observed. Ultrastructural changes in the myocytes seemed to be gradually improved by recanalization, howerver, IVPs were still observed after recanalization. Conclusion: These results suggest that microvessels are more resistant to ischemic insult than the myocytes themselves and IVP by PMNs and platelets may play an important role to produce ischemic or reperfusion injuries. Thus, it is favorable that angioplasty is preceded by thrombolysis and it is likely that restoration of myocardial function requires relarively long period of time even after recanalization.

• The Korean Journal of Pharmacology
• /
• v.24 no.1
• /
• pp.111-123
• /
• 1988

Neutrophil elastases were purified by a three step procedure consiting of one Sephadex G-75 and two HPLC elutions. The elastases cross-reacted with antibodies to human neutrophil elastase. Three bands with molecular weights between 26,000 and 29,700 were observed by gel electrophoresis. At each stage of purification the quantity of Zn increased, reaching molar ratio of 2:1 with elastase in the most purified samples. Calcium content. was seletively elevated during the earlier stages of purification but decreased to a ratio of 0.25 to 1 with elastase at the final step of purfication. Neutrophil elastase could be inhibited by EDTA, EGTA and 1,10-phenanthroline. EGTA inhbition was noncompetitive inhibition and reversible only if the time of preincubation was relatively short, indicating the instability of the apoenzyme. The concentration of chelator required to show significant inhibition of elastase was also dependent upon the stage of purity and the ionic strength of the reaction mixture. Inhibition by EGTA, followed by the removal of EGTA, could be reversed by Zn. In the presence of EGTA the enzyme could be returened to full activity by the addition of Zn, Mn and Ca, but not Mg or Na. All of the above evidence strongly supports human neturophil elastase could be a metalloenzyme as well as a serine protease.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.436-442
• /
• 2014

In this study, we developed an optical-fiber sensor using cobalt chloride solution to monitor temperature in real-time between long distance points unaffected by the electro-magnetic wave and the vibration. Cobalt chloride solutions were made using 10% water and 90% ethanol (v/v) solution. The transmittance of these solutions was analyzed on 655 nm using UV-Visible spectrometer regarding temperature change. Also 30.8 mM cobalt chloride solution was gelled by dissolving polyvinyl butyral and the transmittance of this was analyzed on 655 nm regarding temperature change. The results of transmittance and optical power measurement showed decrease of both transmittance and optical power with increase of temperature from 66.8% and 149.5 nW at $25^{\circ}C$ to 7.1% and 48 nW at $70^{\circ}C$, respectively. These results support the possibility of gelled cobalt chloride/polyvinyl butyral as an optical-fiber sensor to monitor temperature change.