• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.602-605
• /
• 2001

This paper focus on a method to use Ethernet Network for Industrial Communication Network. Ethernet use the CSMA/CD MAC(Medium Access Control) Protocol at the Data-Link Layer, Which isn't suit for Industrial Communication Network requiring Real-Time Communication, periodic data processing, critical data processing characteristics. In this paper we proposed the Virtual Polling Algorithm at the Application Layer will be solution of using the Ethernet Network for the Industrial Communication Network, Proposed Algorithm terminate the Collision in the network thus Delay Time is reduced and Real-Time Communication will be implemented.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.22-31
• /
• 2006

Recent studies have shown that the short time solution of the equation of motion for the rolling of ships is important in deciding the possibility of capsize of ships due to the excessive heel. Since most of known solutions for nonlinear equations of motion are long time or steady periodic solutions, here a simple way is described to get the short time solutions of the Duffing equation, which was chosen for deriving a criterion for the capsize of the ship. With the small external rolling moment, we first assume the state of the small damping and near resonance. Then, for cases when the frequency of the external moment is higher than the resonant one, an inequality was derived as a criterion for the capsize. This gives the range of the initial condition and the magnitude of the external moment which should be avoided for a ship to be safe from capsize. Furthermore, from the linearized equation, it is also shown that a simple and self-explanatory solution can be obtained consistent with that for the case of no damping, which yields the well-known linear growth with time.

• Journal of the Korean Mathematical Society
• /
• v.46 no.1
• /
• pp.71-82
• /
• 2009

In this paper, a stage-structured predator-prey system with impulsive perturbations and time delays is presented to investigate the ecological problem of how a pest population and natural enemy population can coexist. Sufficient conditions are obtained using a discrete dynamical system determined by a stroboscopic map, which guarantee that a 'predator-extinction' periodic solution is globally attractive. When the impulsive period is longer than some time threshold or the impulsive harvesting rate is below a control threshold, the system is permanent. Our results provide some reasonable suggestions for pest management.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.82-88
• /
• 2008

In this paper, Runge-Kutta (RK)-Butcher algorithm is proposed to study the periodic and oscillatory problems. Simulation results obtained using RK-Butcher algorithms and the classical fourth order Runge-Kutta (RK(4)) methods are compared with the exact solutions of a few periodic and oscillatory problems to confirm the performance of the proposed algorithm. The simulation results from RK-Butcher algorithms are always found to be very close to the exact solutions of these problems. Further, it is found that the RK-Butcher algorithm is superior when compared to RK(4) methods in terms of accuracy. The RK-Butcher algorithm can be easily implemented in a programming language and a more accurate solution may be obtained for any length of time. RK-Butcher algorithm is applicable as a good numerical algorithm for studying the problems of orbit and two body as it gives the nearly identical solutions.

• The Korean Journal of Urological Oncology
• /
• 제15권3호
• /
• pp.178-186
• /
• 2017

Purpose: Poloxamer 407 (P407) thermo-sensitive hydrogel formulations were developed to enhance the retention time in the urinary bladder after intravesical instillation. Materials and Methods: P407 hydrogels (P407Gels) containing 0.2 w/w% fluorescein isothiocyanate dextran (FD, MW 4 kDa) as a fluorescent probe were prepared by the cold method with different concentrations of the polymer (20, 25, and 30 w/w%). The gel-forming capacities were characterized in terms of gelation temperature (G-Temp), gelation time (G-Time), and gel duration (G-Dur). Homogenous dispersion of the probe throughout the hydrogel was observed by using fluorescence microscopy. The in vitro bladder simulation model was established to evaluate the retention and drug release properties. P407Gels in the solution state were administered to nude mice via urinary instillation, and the in vivo retention behavior of P407Gels was visualized by using an in vivo imaging system (IVIS). Results: P407Gels showed a thermo-reversible phase transition at $4^{\circ}C$ (refrigerated; sol) and $37^{\circ}C$ (body temperature; gel). The G-Temp, G-Time, and G-Dur of FD-free P407Gels were approximately $10^{\circ}C-20^{\circ}C$, 12-30 seconds, and 12-35 hours, respectively, and were not altered by the addition of FD. Fluorescence imaging showed that FD was spread homogenously in the gelled P407 solution. In a bladder simulation model, even after repeated periodic filling-emptying cycles, the hydrogel formulation displayed excellent retention with continuous release of the probe over 8 hours. The FD release from P407Gels and the erosion of the gel, both of which followed zero-order kinetics, had a linear relationship ($r^2=0.988$). IVIS demonstrated that the intravesical retention time of P407Gels was over 4 hours, which was longer than that of the FD solution (<1 hour), even though periodic urination occurred in the mice. Conclusions: FD release from P407Gels was erosion-controlled. P407Gels represent a promising system to enhance intravesical retention with extended drug delivery.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.309-312
• /
• 1997

The dynamic characteristics of a continuous MMA/MA free-radical solution copolymerization reactor were studied. A mathematical model was developed and kinetic parameters which had been estimated in the previous work were used. With this model, bifurcation diagrams were constructed with various parameters as the bifurcation parameter to predict the region of stable operating conditions and to enhance the controller performance. It was shown that the steady-state multiplicity existed over wide ranges of residence time and jacket inlet temperature. Periodic solution branches were found to emanated from Hopf bifurcation points. Under certain conditions isola was also observed, which would result in poor performance of feedback controllers.

• Journal of Surface Science and Engineering
• /
• v.55 no.4
• /
• pp.196-201
• /
• 2022

This paper deals with anodic oxidation behavior of AZ31 Mg alloy in aqueous solutions containing various NaF concentrations from 0.01 M to 1 M. Three different voltage-time curves and anodic oxide formation behaviors appeared with concentration of NaF in deionized water. When NaF concentration is lower than 0.02 M, the voltage of AZ31 Mg alloy increased linearly and then reached a steady-state value more than 200 V, and large size pits and thin oxide layer were formed. When NaF concentration is between 0.05 M and 0.1 M, the voltage of AZ31 Mg alloy showed large periodic fluctuations of about 30 ~ 50 V around more than 200 V and large number of small particles were observed. If NaF concentration is higher than 0.2 M, PEO films can be formed without visible arcs under solution pH 6.5 ~ 7.5 by F^- ions without help of OH^- ions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.87-94
• /
• 2007

A structural dynamic analysis can be divided into a time domain analysis and a frequency domain analysis. The time domain analysis makes use of a direct integration method or a mode superposition method and the frequency domain analysis applies a DFT method. Generally the DFT method is more effective method in case of calculating response of periodic excitation. But in case of transient excitation exact solution can not be acquired. So, by modifying the response or increasing the period accuracy of solution can be enhanced. Accordingly this study analyzed dynamic responses of structures under aperiodic moving load in time domain and frequence domain. Consequently it is concluded that exact solution would be get enough using DFT method by increasing the duration of free vibration or modifying the dynamic response.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.32-33
• /
• 2003

Mechanism of a periodic oscillation of shock-induced combustion over a two- dimensional wedges and axi-symmetric cones were investigated through a series of numerical simulations at off-attaching condition of oblique detonation waves(ODW). A same computational domain over 40 degree half-angle was considered for two-dimensional and axi-symmetric shock-induced combustion phenomena. For two-dimensional shock-induced combustion, a 2H2+02+17N2 mixture was considered at Mach number was 5.85with initial temperature 292 K and initial pressureof 12 KPa. The Rankine-Hugoniot relation has solution of attached waves at this condition. For axi-symmetric shock-induced combustion, a H2+2O2+2Ar mixture was considered at Mach number was 5.0 with initial temperature 288 K and initial pressure of 200 mmHg. The flow conditions were based on the conditions of similar experiments and numerical studies.[1, 3]Numerical simulation was carried out with a compressible fluid dynamics code with a detailed hydrogen-oxygen combustion mechanism.[4, 5] A series of calculations were carried out by changing the fluid dynamic time scale. The length wedge is varied as a simplest way of changing the fluid dynamic time scale. Result reveals that there is a chemical kinetic limit of the detached overdriven detonation wave, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. At the off-attaching condition of ODW the shock and reaction waves still attach at a wedge as a periodically oscillating oblique shock-induced combustion, if the Rankine-Hugoniot limit of detachment isbut the chemical kinetic limit is not.Mechanism of the periodic oscillation is considered as interactions between shock and reaction waves coupled with chemical kinetic effects. There were various regimes of the periodicmotion depending on the fluid dynamic time scales. The difference between the two-dimensional and axi-symmetric simulations were distinct because the flow path is parallel and uniform behind the oblique shock waves, but is not behind the conical shock waves. The shock-induced combustion behind the conical shockwaves showed much more violent and irregular characteristics.From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1214-1221
• /
• 2006

Header compression scheme is suggested as a solution to reduce the inefficient overhead of general packet stream data. Especially, it is shown that there are more overhead rate for real-time media stream links such as voice because of its short payload size, and it is possible to get higher bandwidth efficiency using the header compression scheme. There are two kinds of error recovery in header compression such as Periodic Header Refresh(PHR) and Header Request(HR) schemes. In this paper, we analyze the performance of these two compression recovery schemes, and some results such as the overhead rate, bandwidth gain and bandwidth efficiency(BE) are presented.