• 한국생활과학회지
• /
• 제16권1호
• /
• pp.137-143
• /
• 2007

The purpose of this study is to prove the work efficiency of PDS by measuring the work time on the process of pattern making of woman's tailored jacket. Also compared to the manual work time, PDS work efficiency is estimated according to experience difference. The YUKA CAD system was used. Through analysis of PDS Process, work time was measured by stop watch. Also the appearance of the 2 jackets was evaluated by a pool of evaluators consisted of graduate students and experienced professional modelist. The results were as follows: The work efficiency of PDS is higher than the work efficiency of manual work. There were significant differences of work time between work types in the expert and inexpert group. A study compared the work efficiency by PDS work type with those by manual work type according to experience difference and found that the work efficiency by PDS in the expert group was 25.3%, in the inexpert group was 35%. There were significant differences of work time between experience groups in PDS work, the work efficiency of expert group to inexpert group in the total pattern making time by PDS was 36.7%. There were no significant differences of appearance of tailored jacket between work types.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1891-1901
• /
• 2017

In this paper, optimal control of the fuel cell and design of a high-efficiency power converter is implemented to build a high-priced fuel cell system with minimum capacity. Conventional power converter devices use a non-isolated boost converter for high efficiency while the battery is charged, and reduce its conduction loss by using MOSFETs instead of diodes. However, the efficiency of the boost converter decreases, since overshoot occurs because there is a moment when the body diode of the MOSFET is conducted during the dead time and huge loss occurs when the dead time for the maximum-power-flowing state is used in the low-power-flowing state. The method proposed in this paper is to adjust the dead time of boost and rectifier switches by predicting the power flow to meet the maximum efficiency in every load condition. After analyzing parasite components, the stability and efficiency of the high-efficiency boost converter is improved by predictive compensation of the delay component of each part, and it is proven by simulation and experience. The variation in switching delay times of each switch of the full-bridge converter is compensated by falling time compensation, a control method of PWM, and it is also proven by simulation and experience.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1319-1335
• /
• 2017

This paper proposes an opportunistic reporting-based sensing-reporting-throughput optimization scheme that maximizes the spectral efficiency of secondary users (SUs) in cooperative cognitive radio networks with a soft combining rule. The performance of cooperative spectrum sensing depends on the sensing time, the reporting time of transmitting sensing results, and the fusion scheme. While longer sensing time and reporting time improve the sensing performance, this shortens the allowable data transmission time, which in turn degrades the spectral efficiency of SUs. The proposed scheme adopts an opportunistic reporting scheme to restrain the reporting overhead and it jointly controls the sensing-reporting overhead in order to increase the spectral efficiency of SUs. We show that there is a trade-off between the spectral efficiency of SUs and the overheads of cooperative spectrum sensing. The numerical results demonstrate that the proposed scheme significantly outperforms the conventional sensing-throughput optimization schemes when there are many SUs. Moreover, the numerical results show that the sensing-reporting time should be jointly optimized in order to maximize the spectral efficiency of SUs.

• 한국입자에어로졸학회지
• /
• 제15권1호
• /
• pp.15-25
• /
• 2019

The influences of corona charging parameters on collection efficiency and surface potential of air filters were investigated. A polypropylene filter medium was electrically charged using a corona charger, and the resulting surface potential and filtration efficiency against neutralized KCl particles were measured. The filter media was charged under different conditions of applied voltage, voltage polarity, charging time, and distance between electrodes. In addition, we considered charging both sides of the filter as well as charging one side of the filter. As a result, electrical force obtained by charged fiber affected filtration efficiency when the apply voltage strength was higher than 7 kV. Negatively charged filter had higher filtration efficiency than positively charged filter while the surface potential of the negatively charged filter was slightly lower than those of positively charged filter. Moreover, the filtration efficiency increased as the charging time of filter fiber increased and the distance between electrodes decreased. The filtration efficiency was more sensitive to changes of charging time than to those of electrode distance, and the efficiency of both sides charged filter was higher than that of single side charged filter.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.357-365
• /
• 2001

The aim of this paper is to perform the experiment and the numerical simulation for investigating the heat transfer in a regenerator system with ceramic honeycomb and to suggest a useful correlation for optimization of the regenerator system. For achieving this, the effects of some parameters were investigated, e. g., switching time, cell size and length of honeycomb on the mean temperature efficiency. The measured temperatures by R-type thermocouples were compared with the predictions by means of the commercial package, STAR-CD. A useful correlation for thermal efficiency was newly proposed as a function of the normalized switching time, defined in terms of switching time, cell size and length of honeycomb. The results showed that the thermal efficiency is above 90% and the normalized heat exchange rate is higher than 80% when the normalized switching time is less than 1000.

• 한국산림과학회지
• /
• 제103권4호
• /
• pp.639-645
• /
• 2014

본 연구는 비모수추정 방법인 자료포락 기법을 이용하여 우리나라 표고버섯 재배 임가를 대상으로 경영효율성을 평가하였다. 조사자료는 2013년 3월부터 10월까지 실시한 '표고버섯 경영 표준진단표' 적용 결과 중에서 20개 임가의 투입요소와 산출요소를 대상으로 하였다. 그리고 DEA 기법중 CCR 모형과 BCC 모형을 이용하여 기술효율성, 순수기술효율성, 규모효율성을 분석하였고 비효율성 임가의 개선방안도 제시하였다. 추가적으로 주업과 겸업재배임가의 경영효율성을 비교 분석하였다. 연구결과, 표고버섯 재배 임가의 전체기술효율성은 평균 0.655로 나타나 전체적으로 비효율성이 높은 것으로 나타났고 비효율성의 원인은 순수기술효율성(0.830)보다는 규모효율성(0.747)에 있는 것으로 분석되었다. 효율성 값이 1인 표고버섯 재배임가는 DMU2, DMU5, DMU6, DMU8, DMU10, DMU15, DMU20으로 7개 임가로 나타났다. 그리고 DMU7 재배임가의 경영효율성 진단 결과, 투입요소 중 신규접종비와 조성비에서 준거집단과 비교해 볼 때 과도하게 투입되고 있는 것으로 분석되었다. 주업과 겸업임가의 효율성 비교 결과 겸업임가가 상대적으로 비효율성이 높은 것으로 나타났고 그 원인으로 규모효율성이 문제가 있는 것으로 파악되었다.

• 산업경영시스템학회지
• /
• 제30권2호
• /
• pp.67-74
• /
• 2007

The objective of this research is to select the most effective technique among task related techniques(motion & time study, job redesign, physical environment improvement) for improving work efficiency in shipbuilding enterprise. This study consists of several principal steps. The first step is to design critical criteria in evaluating work efficiency in ship-building enterprises. The second step is to develop sub-criteria of the critical criteria. The third step is to develop a four level AHP(Analytic Hierarchy Process) structure using the critical criteria, sub-criteria and techniques among task related techniques. The fourth step is to develop the pairwise comparison matrix at each level of AHP structure, which was based on survey data collected at the H heavy industry. And the last step is to select the most effective technique among task related techniques using AHP analysis. The result of AHP analysis has shown clear difference in priority among task related techniques in terms of work efficiency of the shipbuilding enterprise: The reduction of normal time is more important than the reduction of allowance time in improving of the work efficiency. Motion & time study is the most important technique for the reduction of normal time, and physical environment improvement is the most important technique for the reduction of allowance time as well.

• 컴퓨터교육학회논문지
• /
• 제14권5호
• /
• pp.1-8
• /
• 2011

본 연구에서는 전문계 고등학교 학생들의 알고리즘 시간효율성에 관한 개념 이해 수준을 확인하고 빈번하게 발생하는 오개념 유형들을 확인하고자 하였다. 선행연구에서 확인된 세 가지 유형의 오개념들을 토대로 9개의 오개념 측정 문항을 개발하였으며, 프로그래밍 관련 과목을 이수한 51명의 전문계 고등학교 학생들을 대상으로 조사를 실시하였다. 연구결과, 알고리즘 시간효율성에 관한 개념 이해도는 매우 낮은 수준으로 나타났으며, 견고하고 반복적으로 발생되는 여러 유형의 오개념들을 확인하였다. 마지막으로, 확인된 오개념들을 과학적 개념으로 변화시키기 위한 교육적 전략인 시뮬레이션 및 알고리즘 효율성 평가 틀의 활용 방안과 함께 교육과정 개선의 필요성을 제안하였다.

• 한국음향학회지
• /
• 제33권6호
• /
• pp.413-419
• /
• 2014

수중음향 채널은 시변적인 특징을 가진다. 채널의 시변동성은 지속적인 정보 데이터 전송을 방해하여 수중음향통신의 신뢰도를 감소시키는 요인이 된다. 본 논문에서는 채널의 시변동성을 시간영역 상관도로 기술하고, 정보 데이터의 실질 전송시간을 스루풋 효율로 표현하였다. 그리고 수중음향 채널의 시변동성이 통신 스루풋 효율에 미치는 영향을 분석하였다. 실제 수중음향통신 실험을 통하여 수중채널의 시변동성이 클수록 통신의 스루풋 효율도 감소한다는 것을 확인하였다.

• 한국수산과학회지
• /
• 제50권3호
• /
• pp.250-256
• /
• 2017

This study investigated the removal efficiency of organic matter and nitrogen from fish farm effluent by hydraulic retention time (HRT) using an upflow biological filter (ANR system) reactor. The recycling time and influent flow in the reactor were controlled to 14.8, 7.4, 5.5 and 3.2 h to evaluate HRT. In addition, each reactor was coupled to a fixed bed upflow filter charged with media. The results showed that removal efficiency was ${\geq}95%%$ with an HRT of 5.5 h, and nitrification efficiency was reduced to 81% with an HRT of 3.2 h, although nitrification efficiency temporarily decreased due to the shock load as HRT decreased. Total nitrogen removal rate was also reduced to about 65% with an HRT of 3.2 h, which was considered a washout effect of nitrifying and denitrifying microorganisms by increasing the shearing force to the filter media, which decreased organic matter and nitrogen removal efficiency.