• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.74-97
• /
• 2005

IDEF0 is the IEEE standard for functional enterprise modeling and has been used for business process modeling or process mapping in US and Europe. But it does not reflect the potential benefits of modeling and simulation of the dynamic aspects of an enterprise or a system. On the other hand, simulation tools concentrate mostly on the simulation of material flows and are difficult to include information flows and control flows. Additionally, the simulation models that include elements such as queues, event generators and process nodes is a visual interactive representation for the model builder, but is inconvenient for the domain expert. In an attempt to fill that void, we provide an integration of business process and simulation models in this paper. An enhancement of the IDEF0, called parameterized IDEF0, is proposed and its conversion mechanism to network simulation model is developed. Using this methodology, business process models for alternative systems can be evaluated and compared through simulation on time, cost, and quality metrics. As an application of the proposed methodology, economic evaluation of EDI (Electronic Data Interchange) for time-based BPR (Business Process Redesign) is demonstrated. In addition to BPR, the developed methodology may be further integrated with ABC (Activity Based Costing), TQM (Total Quality Management), and economic evaluation of information systems.

• Smart Structures and Systems
• /
• v.3 no.2
• /
• pp.201-217
• /
• 2007

An active damage detection technique is introduced to locate damage in an isotropic plate using Lamb waves. This technique uses a time-domain energy model of Lamb waves in plates that the wave amplitude inversely decays with the propagation distance along a ray direction. Accordingly the damage localization is formulated as a least-squares problem to minimize an error function between the model and the measured data. An active sensing system with integrated actuators/sensors is controlled to excite/receive $A_0$ mode of Lamb waves in the plate. Scattered wave signals from the damage can be obtained by subtracting the baseline signal of the undamaged plate from the recorded signal of the damaged plate. In the experimental study, after collecting the scattered wave signals, a discrete wavelet transform (DWT) is employed to extract the first scattered wave pack from the damage, then an iterative method is derived to solve the least-squares problem for locating the damage. Since this method does not rely on time-of-flight but wave energy measurement, it is more robust, reliable, and noise-tolerant. Both numerical and experimental examples are performed to verify the efficiency and accuracy of the method, and the results demonstrate that the estimated damage position stably converges to the targeted damage.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.354-356
• /
• 2006

This paper presents a new one-terminal numerical algorithm for fault location estimation and for faults recognition. The proposed algorithm are derived for the case of most frequent single-phase line to ground fault in the time domain. The arc voltage wave shape is modeled numerically on the basis of a great number of arc voltage records obtained by transient recorder. From the calculated arc voltage amplitude it can make a decision whether the fault is permanent of transient. In this paper the algorithm uses a very short data window and enables fast fault detection and classification for real-time transmission line protection. To test the validity of the proposed algorithm the Electro-Magnetic Transient Program(EMTP/ATP) is used.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.283-285
• /
• 2005

This paper presents a new two-terminal numerical algorithm for fault location estimation and for faults recognition using the synchronized phasor in time-domain. The proposed algorithm is also based on the synchronized voltage and current phasor measured from the PMUs(Phasor Measurement Units) installed at both ends of the transmission lines. Also the arc voltage wave shape is modeled numerically on the basis of a great number of arc voltage records obtained by transient recorder. From the calculated arc voltage amplitude it can make a decision whether the fault is permanent or transient. In this paper the algorithm is given and estimated using DFT(Discrete Fourier Transform) and the LES(Least Error Squares Method). The algorithm uses a very short data window and enables fast fault detection and classification for real-time transmission line protection. To test the validity of the proposed algorithm, the Electro-Magnetic Transient Program(EMTP/ATP) and MATLAB is used.

• The Korean Journal of Applied Statistics
• /
• v.29 no.3
• /
• pp.463-470
• /
• 2016

In analysing a time series on the frequency domain, the spectral estimator (or periodogram) is a very useful statistic to identify the periods of a time series. However, the spectral estimator is very sensitive in nature to outliers, so that the spectral estimator in terms of M-estimation has been studied by some researchers. Pak (2001) proposed an empirical method to choose a tuning parameter for the Huber's M-estimating function. In this article, we try to implement Pak's estimation proposal in the spectral estimator. We use the Korean housing price index as an example data set for comparing various M-estimating results.

• Wind and Structures
• /
• v.5 no.6
• /
• pp.543-562
• /
• 2002

The main purpose of this study is to discuss the design wind loads for the structural frames of single-layer latticed domes with long spans. First, wind pressures are measured simultaneously at many points on dome models in a wind tunnel. Then, the dynamic response of several models is analyzed in the time domain, using the pressure data obtained from the wind tunnel experiment. The nodal displacements and the resultant member stresses are computed at each time step. The results indicate that the dome's dynamic response is generally dominated by such vibration modes that contribute to the static response significantly. Furthermore, the dynamic response is found to be almost quasi-static. Then, a series of quasi-static analyses, in which the inertia and damping terms are neglected, is made for a wide range of the dome's geometry. Based on the results, a discussion is made of the design wind load. It is found that a gust effect factor approach can be used for the load estimation. Finally, an empirical formula for the gust effect factor and a simple model of the pressure coefficient distribution are provided.

• Biomolecules & Therapeutics
• /
• v.8 no.1
• /
• pp.63-72
• /
• 2000

We intended to show some basic requirements for spectrum analysis of electroencephalogram (EEG) by visualizing the differences of the results according to different values of some parameters for analysis. Spectrum analysis is the most popular technique applied for the quantitative analysis of the electroen- cephalographic signals. Each step from signal acquisition through spectrum analysis to presentation of parameters was examined with providing some different values of parameters. The steps are:(1) signal acquisition; (2) spectrum analysis; (3) parameter extractions; and (4) presentation of results. In the step of signal acquisition, filtering and amplification of signal should be considered and sampling rate for analog-to-digital conversion is two-time faster than highest frequency component of signal. For the spectrum analysis, the length of signal or epoch size transformed to a function on frequency domain by courier transform is important. Win dowing method applied for the pre-processing before the analysis should be considered for reducing leakage problem. In the step of parameter extraction, data reduction has to be considered so that statistical comparison can be used in appropriate number of parameters. Generally, the log of power of all bands is derived from the spectrum. For good visualization and quantitative evaluation of time course of the parameters are presented in chronospectrogram.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.126-131
• /
• 2003

While the advantages of multicast delivery over multiple unicast deliveries is undeniable, the deployment of the IP multicast protocol has been limited to network domains under single administrative control. Deployment of inter-domain multicast delivery has been slow due to both technical and administrative reasons. For this reasons overlay multicasting technologies are recently proposed. We propose a End-Host Multicast Tree Protocol (EMTP) that searches two levels of the tree at a time until reaching to a leaf node and can select the nearest node that a new node try to join in the tree. Even if there is no available degree of the desirable node that a new node want to join, selecting the node as a potential parent by EMTP can reduce the number of tree switching with robustness of the tree and bring to ruduce the data delivery time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.492-501
• /
• 2004

The performance of mobile communication systems depends on the state of the time-varying multi-path fading channel. To effectively prevent the corruption of video stream and its propagation in spatial and temporal domain, proactive error controls are widely being deployed. Among possible candidates, the rate compatible punctured convolutional (RCPC) code has been widely used for multimedia data, since its rate can be determined flexibly. In this paper, the adaptive channel estimation and the adaptive error correction techniques over the time-varying mobile channel have been proposed. Extensive computer simulations show that the proposed techniques yield the superior performance than the fixed rate system.

• Korean Journal of Occupational Health Nursing
• /
• v.15 no.1
• /
• pp.58-71
• /
• 2006

Purpose: This study was performed to identify workers' Job stress status and to analyse the influencing factors. Method: Data were collected from 456 workers with Korean Occupational Stress Questionnaire Short Form(KOSQ SF) and analysed using descriptive statistics, t-test, ANOVA. Results: Total job stress status of men was slightly lower than Korean workers' standard. In case of women, the score of total job stress was lower than Korean workers' standard. The most significant influencing factors to stressors were insufficient sleeping time and self cognitive bad health condition. Among seven domains of job stressors, job demand was affected by 8 characteristics. Conclusion: This study indicated that workers' job stress level were various by their characteristics except workplace size. The development of stress management programs by types of industry is required. On the base of the model program, planning of customized program for every company or employee is required. High job demand, insufficient job control, insufficient sleeping time, bad health condition are the key factors of workers' job stress in this study. The change of workers' health behavior with supportive environment is essential to stress management program. More researches for adding physical environment domain to KOSQ SF are expected.