• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.413-418
• /
• 2001

The change of crystalline structure and mechanical properties of drawn PP filaments which was treated by tensioned and non-tensioned annealing was investigated. Measurements were carried out with XRD for crystallite size, density gradient tube for crystallinity. and UTM for mechanical properties. Tensioend and non-tensioned annealing were carried out $80^{\circ}C$, $100^{\circ}C$, $120^{\circ}C$: for 10min., 30min., 60min, in oil bath. It was found that the crystallinity and crystallite size of (110) plane of samples were increased with increasing of annealed temperature and time. Also crystallinity and crystallite size of samples which was tensioned annealing were larger than those of non-tensioned annealed samples. Initial modulus and tensile strength of tensioned annealed samples were higher than non-tensioned annealed samples, But elongation of tensioned annealed samples was lower than non-tensioned annealed samples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1483-1484
• /
• 2000

Dielectric thin films of PLT(Pb(La.Ti)O3) for the application of highly integrated memory devices have been deposited on Pt/Ti/SiO2/Si substrates in situ by pulsed laser deposition(PLD). We have systematically investigated the variation of grain sizes depending on the condition of post-annealing and the variation of deposition rate. Both in-situ annealing and ex-situ annealing have been compared depending on the annealing time. C-V measurement, ferroelectric properties, leakage current and SEM were performed to investigate the electrical properties and the microstructural properties of Pb(La,Ti)$O_3$ films.

• 대한금속재료학회지
• /
• 제49권10호
• /
• pp.790-796
• /
• 2011

To reduce the heat released during intermetallic reaction, Ni-50at%Al powder compact has been previously annealed at several conditions before the reaction. The effects of the pre-annealing conditions on the reaction synthesis process have been investigated. Experimental results show that the heat released during the reaction synthesis decreased proportionally with increase of the pre-annealing temperature and duration time. The reaction duration period was significantly increased when the intermetallics were formed in the powder compact during the pre-annealing. This was attributed to the fact that the reaction occurred by solid-state diffusion between the un-reacted elemental atoms and that the $NiAl_3$ phase formed predominantly during pre-annealing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1762-1764
• /
• 1999

We investigated the annealing effect on generating pretilt angle and aligning liquid crystal (LC) using the photo-depolymerization reaction in this study. In case of rubbing polyimide (PI) surface with the side chain, pretilt angle tends to increase with increasing the annealing time. It is considered because the steric interaction is increased by annealing which cause the side chain to come back to original position. For obliquely irradiating ultraviolet (UV) light on PI surface, pretilt angle shows to $0^{\circ}$ and is increased by annealing. The pretilt angle in rubbed PI surface is much higher than in photo-aligned PI surface. It is attributed to the steric interaction and the number of LC molecular arrangement on azimuthal direction. In addition. in case of obliquely irradiating UV light on PI surface. it showed LC alignment to increase by annealing. It can be regarded due to the fact that the re-alignment of LC molecule is improved to residual polymer direction by annealing.

• 열처리공학회지
• /
• 제19권3호
• /
• pp.149-155
• /
• 2006

The effects of eight types of spheroidizing annealing conditions including annealing temperature, annealing time, cooling rate, and gas atmosphere in the annealing furnace on the microstructure were determined in SM45C steel which has been widely used for automotive parts. The well-developed spheroidized structure and minimum hardness were obtained when the steel was heat-treated 6 hours at $740^{\circ}C$, cooled to $710^{\circ}C$ at a cooling rate of $24^{\circ}C/h$, and then kept for 7 hours at the $710^{\circ}C$ followed by air cooling. In order to increase the productivity and to save the manufacturing cost, it is desirable to apply a faster cooling rate in the spheroidizing annealing. It was found that air cooling was the fastest cooling rate applicable to the SM45C steel. The steel heat treated in air showed the decarburized layer of about $110{\mu}m$ in thickness at the surface of the specimen, resulting in serious problems in the quality of the quenched product.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.696-704
• /
• 1998

Artificial neural networks (ANN) have successfully applied into various areas. But, How to effectively established network is the one of the critical problem. This study will focus on this problem and try to extensively study. Firstly, four different learning algorithms ANNs were constructed. The learning algorithms include backpropagation, simulated annealing, genetic algorithm, and tabu search. The experimental results of the above four different learning algorithms were tested by statistical analysis. The training RMS, training time, and testing RMS were used as the comparison criteria.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.81-85
• /
• 2015

본 연구에서는 Poly (3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-Phenyl C61 butyric acid methyl ester (PCBM)과 GaN를 이용하여 유무기 하이브리드 광전변환소자를 제작함에 있어서, P3HT:PCBM 활성층의 열처리가 소자의 단락전류밀도에 미치는 영향을 알아보았으며 이때 유기물의 농도와 혼합비율을 달리 하였다. 유기물 각각의 층을 코팅하여 층을 만들 때마다 열처리 한 경우, 즉 pre-annealing샘플과 pre-annealing 과정을 거쳐 제작된 소자 전체를 한 번 더 열처리하여 즉 post-annealing까지 행한 샘플을 비교하였다. 그 결과 post-annealing한 샘플이 더 높은 단락전류밀도의 값을 가졌고 이때 P3HT와 PCBM은 1wt%와 1:1 혼합비율에서 좋은 열처리 효과를 나타내었다.

• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.61-66
• /
• 2018

본 연구에서는 DRAM 제조 집적공정의 금속배선으로 사용하는 구리의 자기 열처리(self-annealing) 후 박막 특성 변화에 대한 연구를 진행하였다. 구리를 증착하고 상온에서 시간이 경과하면 구리가 성장하여 결정체 크기 변화가 생기는데 이를 자기 열처리라고 부른다. 구리 금속의 증착은 전기 도금법(electroplating)을 사용하였다. 구리 도금액으로 유기 첨가물이 다른 두 가지 시료인 기준 도금액과 평가 도금액 두 용액에 대해 평가 하였다. 자기 열처리 시간이 경과함에 따라 시간에 대해 면 저항 값의 변화가 없는 영역과 이후 급격하게 떨어지는 구간으로 나누어지고 최종적으로 포화면 저항 값을 보인다. 최종적인 면 저항 값은 초기 값 대비 20% 개선 효과를 보인다. 평가 전해액의 자기 열처리 효과가 기준 용액 대비 더 빠른 시간 안에 이루어졌는데 이는 유기 첨가물의 차이 때문이다. 개선의 효과 분석으로 TEM 장비를 이용하여 결정체 변화를 관찰하였고 자기 열처리 공정에 의해 효과적인 결정체 성장이 이루어졌음을 발견했다. 또한 단면 TEM 측정 결과 자기 열처리 된 시료는 전류 방향으로의 결정체 경계면 숫자가 줄어드는 bamboo 구조를 보인다. 열적 열하 특성(thermal excursion characteristics) 측정 결과 고온 열처리 대비 자기 열처리 시료가 hillock 특성이 보이지 않고 이는 박막의 신뢰성 특성을 향상 시킨다. Electron backscattered diffraction (EBSD) 측정 결과 결정체가 $2{\mu}m$까지 성장한 결정체를 관찰하였고 스트레스에 의한 void를 억제하는데 유리한 (100) 면 비중이 증가하는 방향으로 결정체 성장이 이루어짐을 알 수 있다.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.19-24
• /
• 2019

In this study, the Ag nano-dots structure was applied to the textured wafer surface to improve the light trapping effect of crystalline silicon solar cell. The Ag nano-dots structure was formed by the annealing of Ag thin film. Ag thin film deposition was performed using a thermal evaporator. The effect of light trapping was compared and analyzed through light reflectance measurements. The optimization process of the Ag nano-dots structure was made by varying the thickness of Ag thin film, the annealing temperature and time. The thickness of Ag thin films was in the range of 5 ~ 20 nm. The annealing temperature was in the range of 450~650℃ and the annealing time was in the range of 30 ~ 60 minutes. As a result, the light reflectance of 10 nm Ag thin film annealed at 650℃ for 30 minutes showed the lowest value of about 9.67%. This is a value that is about 3.37% lower than the light reflectance of the sample that has undergone only the texturing process. Finally, the change of the light reflectance by the HF treatment of the sample on which the Ag nano-dots structure was formed was investigated. The HF treatment time was in the range of 0 ~ 120 seconds. As a result, the light reflectance decreased by about 0.41% due to the HF treatment for 75 seconds.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.902-908
• /
• 2006

We propose a scheme for more efficient navigation in a hierarchical file system. In the proposed scheme, a program running in the background computes the degree of relationship between a current file and others, and builds a list of the most related files. The current relationship metric being used by the program is a linear combination of five parameters: the name, the directory path, the type, the created time, and the last accessed time of a file. A simulated annealing algorithm is used in order to determine the weighting factors of the parameters. A set of experiments were conducted in order to access the effectiveness of the proposed scheme.