• Journal of the Korean Society of Tobacco Science
• /
• v.4 no.2
• /
• pp.41-50
• /
• 1982

To investigate tile effects of growth characteristics on the yield, price per Kg, chemical contents and physical properties in Burley tobacco, ten varieties including Burley 21 were tested in this study. The results obtained are summarized as follows. 1 Forty to fifty days after transplanting, CCR (Crop Growth Rate) was the highest. RCR (Relative Growth Rate) increased up to 40 days, but decreased 50 days when maturation began. High- yielding varieties showed high CCR and RCR till 60 days. 2. Total alkaloid content of cured leaf increased about three times than that of topping stage, but the increased rates were some what different among varieties. 3. Leaf area, stalk diameter, stalk height and days to flower showed positive correlations to yield, whereas leaf thickness and weight per unit leaf area showed negative. 4 Varieties which are high in cured leaf weight ratio and weight per unit leaf thickeners showed relatively poor quality. 5 Nitrogen content was high in leafy and larger stalk diameter variety. 6. There are positive correlation between weight per unit leaf thickness and filling power. The time of combustion was positively correlated to leaf thickness and weight Per unit leaf. 7. It can be concluded that many characteristics are related to the yield, but not quality. It is, there fore, easy to Predict tile yield, but difficult to forecast the qualiffy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.96-104
• /
• 2009

An anatomically detailed elderly human body model is under development. Using the anthropometric database of domestic nation-wide size survey, SizeKorea, a standard size and shape of 50th %tile elderly was constructed. Through the local recruitment process, a male volunteer with 71 years of age, 163cm of height and 63kg of weight has been selected. The exterior (skin) and interior (skeleton and organ) geometries were acquired from whole body 3D laser scan and various medical images such as CT, X-ray, and Ultrasonic of the volunteer. A particular attention has been paid into the combining process of exterior and interior geometries especially for joint articulation positions since they were measured at different postures (sitting vs. supine). A whole ribcage of PMHS which possessed similar anthropometry and age of standard 50th %tile elderly was prepared and dissected for the precise gauge of cortical rib bone thickness distributions. After completing the morphological construction of elderly human body, the finite element modeling will be processed by meshing elements and assigning mechanical properties to various biological tissues which reflect the aging effect.

• Journal of Korea Foresty Energy
• /
• v.2 no.2
• /
• pp.1-12
• /
• 1982

To study tile comparison of aboveground biomass of Pinus rigida Mill. of 18-year-old, plantations located in Whaseong, Yuseong and Wanju district were selected. Ten sample trees in each district selected taking account of DBH distribution were felled carefully to minimize loss of branches and stem analysed by 1m lag segment sectioned from base . The tree height and DBH were measured for sample trees in total growing within $200m^2$ experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two variables, $DBH^2$ and tree height, combined term were presented. The standing crops in the sample stand was estimated to be as much as 23.88, 54.09 and 42.68 tons of dry matter, above ground , per ha in Whaseong, Yuseong anf Wanju district respectively. Annual net production was estimated at 253,657 and 3.65 tons per ha per year respectively. The net assimilation rate was 1.65,1.95 and 1.81 kg/kg/yr in Whaseong, Yuseong and Wanju district respectively. The efficency of leaf to produce stem was 0.99, 1.12 and 1.30 kg/kg/yr respectively.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.487-492
• /
• 1998

The experiment was conducted to determine the effects of enhanced UV-B on growth and differential responses among cultivars in soybean. The soybean cultivars subjected to enhanced UV-B irradiation at daily dose of 11.32 kJ $m^{-2}(UV-B_{BE})$ revealed that the growth was significantly depressed. Plant height, leaf number, leaf area and dry weight were inhibited by UV-B irradiation showing differential responses among cultivars used. Danyeubkong seems to be less sensitive to the enhanced W-B irradiation, while Keunolkong more sensitive. Reduction of chlorophyll content was also found significantly greater to Keunolkong. Specific leaf weight an index of leaf thickness, and flavonoid content known as UV-absorbing compounds were significantly Increased in Danyeubkong by UV-B, but those In the other cultivars were not significantly affected. The results indicated that there are cultivar diferences in tile growth and phisiological responses to the enhanced UV-B irradiation and specific leaf weight and UV-absorbing compounds in the leaves were highly related to the sensitivity of soybean by UV-B irradiation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.733-737
• /
• 1996

This paper presents a method to measure tile position and orientation of a prismatic polyhedral object (of unknown width, length, height, and number of vertices) using machine vision. The width, length, and origin of workplace where an object is lying are defined as Preliminary operation. The edges of an object are detected from captured image using least sum of square error. The information of an object is determined from the geometric relationships between edges. As an user interface, a versatile image processing program is developed in several modules, and renders a very useful 3D measurement at a limited constraints when adopted in automation of production process. The flexibility of camera position from the algorithm developrf can be used for automated pick and place operations and feeding workpiece u: ;ing assembly robot.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.76-83
• /
• 1993

In this study, an approximate method for calculating the directional spectrum of waves encountering a current in shallow water is developed. The wave trains in tile directional spectrum are assumed to be linear and Gaussian; development of the spectrum requires that the waves also be short crested. The Miche's breaking criterion is imposed to determine the upper limit of wave height and to establish an expression for the breaking wave elevation in terms of the ideal wave's elevation and the second time derivative of wave elevation. Two examples are given; one for a Wallops directional spectrum encountering a shear current and another with an upwelling current.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.3-7
• /
• 2005

Focal mechanism of the real and imaginary faults in the western coast of Japan has been assumed by examining the previous studies on the seismicity, seismic gap, fault behaviors, seismic zoning, and faults. In the area of no seismic information, the focal mechanism has been assumed to have the maximum influence on the tsunami height in the eastern coast of Korea. The tsunami height in a particular point of the eastern coast of Korea can vary up to 7 orders with the variation of the strike of the fault in a particular source point of the western coast of Japan with constant magnitude. Tsunami scenario DB including tile arrival times and tsunami heights has been constructing by using the assumed focal mechanism of the western coast of Japan. Tsunami warning system will be reinforced by using this tsunami scenario DB near future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.3
• /
• pp.321-337
• /
• 1992

The objective of this study was to compare the condylar path and the anterior angle of articular fossa and to analyze the pattern of condylar path in edentulus patients. Nineteen male and female edentulous patients with normal masticatory system ranging in age 42 to 78, without present symptoms and any history of TMJ disturbance were selected for this study. On the computer analysis on the transcranial radiographs of the TMJ, the angle of slope of articular eminance and condylar path to the Frankfort Horizontal Plane and the height of glenoid fossa was measured respectively, and stuied their interrelationship comparatively. Obtained results were asfollows. 1. The angle of the slope of articular eminence averaged 37.28 degree. and there was no significant difference between the right and left side. 2. The condylar path angle averaged 29.05 degree and there was no significant difference between the right and left side. 3. The height of the glenoid fossa averaged 8.11 mm and there was no significant difference between the right and left side. 4. The sequence of the frequence of condylar movement patterns were concavex curve(39.5% ), 'S' shape curve(34.2%), reverse 'S' shape(15.8%) and convex curve(10.5%). 5. The horizontal distance of the point of the changed curve of the condylar path averaged 2.91 mm. 6. The height of glenoid fossa was highly correlated to the slope of articular eminence and relatively highly correlated to tile condylar path and the condylar path was closely correlated to the slop of articular eminence.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.3_4
• /
• pp.92-98
• /
• 1971

With Saxidomus Purpuratus which were sampled near Yungdo, in the harbor of Pusan during the period from September 1967 to October 1968, the author investigated the maturity against seasonal change of water temperature; and shell length, height and width against live weight, respectively, and the reciprocal correlations of shell length, height and width, as well. The maturity, concerned deeply with tile developing procedure of gonad, is dependent on the change in water temperature. The value of maturity becomes higher from March to May, but in August with high temperature the value decreases temporarily. During the main spawning season from the late August to the middle of October, the value shows the peak throughout a year. After the period, it has decreased until January when the water temperature is below $10^{\circ}C$ The equations of shell length against live weight for male($W=0.4749L^{2.62307}$)and for female ($W=0.3438L^{2.77993}$) shell height against live weight ($W=0.3221L^{3.06661}$), and shell width against live weight ($W=3.5868L^{2.46646}$), show non-straight lines respectively. On the other hand, th: equations of shell length against shell height Y=0.818x+0.292 (r=0.958), shell length against shell width Y=0.520x+0.200 (r=0.799) and shell height against shell width Y=0.499x+0.516 (r=0.773) show straight lines, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.