• The Journal of Korean Physical Therapy
• /
• 제32권6호
• /
• pp.378-382
• /
• 2020

Purpose: This study aimed to examine the effects of forward head posture on the flexion-relaxation ratio (FRR) and muscle activity during sustained neck flexion and to investigate the correlation between craniovertebral angle and FRR. Methods: Nineteen subjects participated in this study and were allocated to a forward head posture (FHP) group or a non-forward head posture (NFHP) group. Craniovertebral angle (CVA) and FRR were measured in all subjects, and all participants performed a standardized cervical flexion-extension movement in two phases: Phase I, sustained cervical full flexion for 5s; and Phase II, cervical extension with the return to the starting position for 5s. The value of CVA has calculated three times, and the value of FRR was measured three times in order to obtain the mean value. Results: FRR values in the FHP and NFHP group were significantly different (p<0.05). Phase I was significantly different, but the Phase II was not significantly different between the FHP and NFHP group (p>0.05). There was a significant correlation between the muscle activity of Phase I and CVA (p<0.05). However, FRR and the muscle activity of the Phase II were not a significant correlation with the CVA (p>0.05). Conclusion: FHP increases the muscle activity of the cervical erector spinae during sustained neck flexion and reduces FRR, which can cause fatigue in the cervical erector spinae. In addition, for those with a smaller CVA, muscle activity of the cervical erector spinae is increased during sustained neck flexion, which can increase neck muscle tension.

• 대한전기학회논문지
• /
• 제35권12호
• /
• pp.541-554
• /
• 1986

This paper presents the results of driving performance analysis of permanent magnet synchronous motor using a microprocessor based control system. The system consists of three phase power transistor inverters, three phase controlled rectifier, three central processing units, and sensors. The three CPUs are, respectively, used to generate PWM control signals for the inverter generating three phase sine wave, to generate the gate control signals for firing the converter, and to supervise other two CPUs. The supervisor is used to compute PI control algtorithm to three phase reference sine wave for the inverter. It is also used to maintain a constant voltage frequency ratio for the converter operating as a constant torque controller. The inverter CPU retrieves precomputed PWM patterns from look up tables because of computation speed limitations found in almost available microprocessors. The converter CPU also retrieves precomputed gate control patterns from another look-up tables. For protecting the control ststem from any damage by extraordinary over currents, the supervisor receives the data from current sensor, CT, and break down the CB to isolate the circuits from source. A resolver has a good performance characteristics of overall speed range, especially on low speed range. Therefor the speed control accuracy is impoved. The microprocessor based PM synchronous motor control system, thus, has many advantages such as constant torque characteristics, improvement of wave, limitation on extraordinary over currents, improvement of speed control accuracy, and fast response speed control using multi-CPU and look-up tables.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.303-310
• /
• 2003

Small-scale models have been frequently used for experimental evaluation of seismic performance because of limited testing facilities and economic reasons. However, there are not enough studies on similitude law for analogizing prototype structures accurately with small-scale models, although conventional similitude law based on geometry is not well consistent in the inelastic seismic behavior. When fabricating prototype and small-scale model of reinforced concrete structures by using the same material, added mass is demanded from a volumetric change and scale factor could be limited due to size of aggregate. Therefore, it is desirable that different material is used for small-scale models. Thus, a modified similitude law could be derived depending on geometric scale factor and equivalent modulus ratio. In this study, compressive strength tests are conducted to analyze equivalent modulus ratio of micro-concrete to normal-concrete. Equivalent modulus ratios are divided into elastic, weak nonlinear and strong nonlinear phases, which are based on ultimate strain level. Therefore, an algorithm adaptable to the pseudodynamic test, considering equivalent three phase similitude law based on seismic damage levels, is developed. In addition, prior to tile experiment, it is verified numerically if tile algorithm is applicable to the pseudodynamic test.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2931-2938
• /
• 2011

2상 복합재에 적용되어오던 수정된 Eshelby 모델(MEM)을 두 종류의 구형 입자를 포함하는 3상 복합재로 확장하여 복합재의 등가열전도계수를 간단히 양함수 형태로 표시한다. 이의 유효성 검증을 위해 이 결과를 미소등가물모델(DEMM)로 구한 결과와 비교하고, 또 참고문헌의 2상 및 3상 복합재의 실험결과와 비교한다. 2상 복합재의 경우 MEM이 충전재의 체적비 0.5 미만에서는 DEMM보다 잘 예측한다. 3상 복합재의 경우 모재 대비 큰 열전도계수비를 갖는 충전재의 체적비가 적은 경우 MEM이 잘 예측하나, 체적비가 증가할수록 DEMM이 잘 예측한다. 이 체적비가 두 모델의 예측결과에 결정적 영향을 주는 인자임이 변수들의 영향 연구를 통해 밝혀졌으며, Molina 등이 제안한 3상 복합재에 대해 MEM과 DEMM은 동등한 예측 수준을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.233-234
• /
• 2007

We investigated the quench characteristics in integrated three-phase flux-lock type superconducting fault current limiter (SFCL), which consisted of three-phase flux-lock reactor wound on one iron core with the same turn's ratio between coil 1 and coil 2 for each single phase. To study the quench characteristics of the SFCL, the experiments was performed on various fault type such as the single line-to-ground fault, the double line-to-ground fault, the triple line-to-ground fault. From the experimental results, the generated point of element resistances was different on various fault type.

• 한국전산구조공학회논문집
• /
• 제35권2호
• /
• pp.65-71
• /
• 2022

최근에는 경량화 문제에 대한 합리적인 솔루션을 제공하고 유용한 개념설계를 제공할 수 있는 다중 재료 구조 위상최적화가 더욱 중요해지고 있다. 기존의 MMTO(Multi-Material Topology Optimization)의 경우 후보 물질의 수가 증가할수록 설계변수의 수도 증가하고, 결과적으로 계산 시간이 크게 증가한다. 따라서 PSM(Phase Section Method)과 같은 단일 설계변수를 갖는 MMTO가 제안되었다. 본 연구는 조성비가 면적이나 부피비를 나타내지 못하고, 설계변수가 목표치에 충분히 집중되지 않고, 특정 재료가 요구량보다 적게 생성되는 PSM의 세 가지 주요 제한점을 고려하여 이를 개선하는데 중점을 둔다. 이러한 한계를 극복하기 위해 재정의된 조성비와 더 나은 수렴을 위한 조정된 매개변수를 제안한다. 제안된 수정 사항의 유효성을 2차원 및 3차원 수치 예제를 통해 검증한다.

• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.841-852
• /
• 2022

본 논문에서는 LCL 필터의 성능 검증을 위한 SPWM 제어기반의 3상 인버터 출력 파형 발생 장치를 개발하였다. 필터의 성능 검증을 위한 검사 신호를 얻기 위해 먼저, DSP 기반의 3상 SPWM 신호 생성 알고리즘을 개발하였으며, 동시에 3개의 하프 브리지 게이트 드라이버를 이용하여 SPWM 게이트 구동 신호들로부터 3상 SPWM 출력 파형을 발생시키기 위한 3상 전압형 인버터 회로를 설계하였다. 다음, 개발된 SPWM 기반 3상 인버터 출력 파형 장치의 검사 신호 발생 장치로서의 유효성을 검증하기 위해 하나의 LCL 필터가 실험, 제작되었으며, DSP 기반의 성능 검증 시스템이 실험적으로 구축되었다. 끝으로, 주어진 시비율을 가지는 출력 제어 실험에서 LCL 필터의 전 후의 3상 전압 파형을 비교함으로써 SPWM 기반 3상 인버터 출력파형 발생 장치의 유효성을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제13권7호
• /
• pp.649-656
• /
• 2002

본 논문에서는 고속 주파수 스위칭 특성을 갖는 디지탈 하이브리드 위상고정루프(DH-PLL: Digital Hybrid Phase-Locked Loops)의 위상잡음을 분석하였다. 기존 위상고정루프에 비하여, 디지탈 하이브리드 위상고정루프는 D/A 변환기에서 발생하는 잡음이 전체 출력위상잡음에 추가되므로 위상잡음이 증가되는 문제점이 있다. 입력기준신호, D/A 변환기, 그리고 전압제어발진기(VCO: Voltage Controlled Oscillator)를 주요 잡음원으로 고려하여, 이것에 의한 위상잡음을 해석적으로 분석하였다. 또한 폐루프 대역과 주파수 합성 분주비(hi)에 따른 위상잡음의 변화를 연구하여 디지탈 하이브리드 위상고정루프의 위상잡음을 최소화하는 최적 폐루프 대역을 결정할 수 있다. 또한, 해석적 방법에 의한 분석 결과와 회로 시뮬레이션에 의한 결과가 동일함을 확인하였다.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.1064-1071
• /
• 1994

There are three active radicals which become to the scale of flame diagnostics at the flame front. They are OH, CH and $C_2$ radical. For this, optical measurement system which could monitor simultaneously the luminous waves of three radicals, was constructed. These were analyzed statistically into the cross correlation, coherence and phase. Through such an statistical treatment, combustion characteristics was investigated at the primary zone of gas turbine combustor. The local equivalence ratio was predicted with the ratio of luminuous intensity between CH and $C_2$ radical. This result was matched up to the equivalence ratio calculated from gas composition within 5% error. In general, equivalence ratio was said to be 1.0 at flame front, but it could be increased up to about 1.2 depending on the degree of swirl intensity in case of changing properly the air amount of primary zone.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.227-232
• /
• 2000

The LSM-YSZ composite electrode as a mixture of LSM and YSZ shows percolation characteristics. It was identified that the polarization resistance of LSM-YSZ composite electrode depend on YSZ connectivity by changing powder size ratio of the DLSM/DYSZ. That is, YSZ in composite electrode showed low electrochemical activity without YSZ connectivity. However, the polarization resistance decreased abruptly with YSZ connectivity due to high electrochemical activity of YSZ in composite electrode. Because the amount of three phase boundary is dependent on LSM and YSZ particle size, the polarization resistance of cathode decreases as LSM and YSZ particle size decreases.