• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.4
• /
• pp.1-8
• /
• 1968

A TANT network is a three-level network composed solely of NAND gates having only true(i.e. uncomplemented) inputs. The paper presents a technique for finding for any given Boolean function a least-cost TANT network. The first step of the technique is to determine essential prime implicants(EPI) by Quine-McCluskey procedure or other methods and generate prime implicants(PI) hving the same head as any one of EPI by consensus operation. The second step is to select common factors among the usable tail factors. The selcetion phase is analogous to the use of C-C table. The last step is to minimize inputs by deleting the redundant PI. the technique permits hand solution of typical five-and six-variable problems.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.2
• /
• pp.95-100
• /
• 2009

In this study, the casting process using forged insert was investigated to characterize the manufacturing process by which good mechanical properties can be obtained when compared with existing casting products. Process analysis for the casting design was performed by using FVM (Finite Volume Method) software. In pouring process, three kinds of candidate gating systems are considered and analyzed respectively. The molten metal behavior in gating system is so important that it affects the solidification behavior of the cast. The results show that as the number of gates is increased, hardness of cast was increased and gaps of cast with forged insert were decreased.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.91-94
• /
• 2012

This paper describes an efficient implementation of ARIA crypto algorithm which is a KS (Korea Standards) block cipher algorithm. The ARIA crypto-processor supports three master key lengths of 128/192/256-bit specified in the standard. To reduce hardware complexity, a hardware sharing is employed, which shares round function in encryption/decryption module with key initialization module. It reduces about 20% of gate counts when compared with straightforward implementation. The ARIA crypto-processor is verified by FPGA implementation, and synthesized with a 0.13-${\mu}m$ CMOS cell library. It has 33,218 gates and the estimated throughput is about 640 Mbps at 100 MHz.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.76-86
• /
• 2012

The block cipher ARIA has been threatened by side-channel analysis, and much research on countermeasures of this attack has also been produced. However, studies on countermeasures of ARIA are focused on software implementation, and there are no reports about hardware designs and their performance evaluation. Therefore, this article presents an advanced masking algorithm which is strong against second-order differential power analysis (SODPA) and implements a secure ARIA hardware. As there is no comparable report, the proposed masking algorithm used in our hardware module is evaluated using a comparison result of software implementations. Furthermore, we implement the proposed algorithm in three types of hardware architectures and compare them. The smallest module is 10,740 gates in size and consumes an average of 47.47 ${\mu}W$ in power consumption. Finally, we make ASIC chips with the proposed design, and then perform security verification. As a result, the proposed module is small, energy efficient, and secure against SODPA.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.435-438
• /
• 2016

HEVC CABAC binary arithmetic decoder operates in three decoding modes i.e. regular, bypass, and termination modes, where their decoding operations and time differ a lot. Furthermore, when renormalization occurs, its internal feedback loop induces large delay. In this paper, a binary arithmetic decoder was designed to solve this problem. In advance, it checks all range values with possible renormalization. When renormalization occurs, it immediately updates range value and finishes all calculation in a cycle. When implemented in 0.18 um process technology, its maximum operating frequency and gate counts are 215 MHz and 5,423 gates, respectively.

• Journal of architectural history
• /
• v.20 no.5
• /
• pp.47-61
• /
• 2011

This study examined the background and change of building Yeongam eupseong and characteristics and construction method of its spatial structure. The results of this study can be summarized as follows. First, Yeongam eupseong was built for the same purpose of national border defense against the invasion of Japanese army as other Eupseongs were built and it was found first in the literature in the era of King Munjong of Joseon Dynasty with the scale of three gates and 4,369 cheok of castle wall. Such a scale was continued and in particular, according to flat structure, road network and gate position shown in the map, the form and road system of Yeongam eupseong before the 19th century were mostly identical with the current ones. Second, castle wall was built over foundation by using talcum after leveling the foundation soil and castle wall can be divided into outer wall, filling part and inner wall from the section. Outer wall was constructed by inserting and layering pebbles with big irregular stone, filling part was made with talcum and riprap and inner wall with soil in several layers by keeping gradient. This building method showed common features in inserting and layering pebbles for outer wall, use of protruded base and section form compared to Jeollado Eupseong.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.962-975
• /
• 2020

The accurate segmentation of infant brain MR image into white matter (WM), gray matter (GM), and cerebrospinal fluid (CSF) is very important for early studying of brain growing patterns and morphological changes in neurodevelopmental disorders. Because of inherent myelination and maturation process, the WM and GM of babies (between 6 and 9 months of age) exhibit similar intensity levels in both T1-weighted (T1w) and T2-weighted (T2w) MR images in the isointense phase, which makes brain tissue segmentation very difficult. We propose a deep network architecture based on U-Net, called Triple Residual Multiscale Fully Convolutional Network (TRMFCN), whose structure exists three gates of input and inserts two blocks: residual multiscale block and concatenate block. We solved some difficulties and completed the segmentation task with the model. Our model outperforms the U-Net and some cutting-edge deep networks based on U-Net in evaluation of WM, GM and CSF. The data set we used for training and testing comes from iSeg-2017 challenge (http://iseg2017.web.unc.edu).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.95-104
• /
• 2017

We investigate the God gate olleh of the largest tomb, pyramid, in the world which is scattered in Jeju Island and construct link which is connecting Jeju people's custom to modern science. The three sacred gates and the two tombs are connected to the olegil space. In this space, the principle of complementarity in which coexistence exist between life and death is hidden in Jeju culture. It is a question and wait. Contrarily, the opposite is complementary. (Contraria Sunt Complementa Latin) This refers to the relationship of each other in relation to one another and in a mutually dependent relationship. Seminal vesicles are used as basic logic in DNA codon of human body as well as communication principle.

• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.328-331
• /
• 2008

Corrosion behaviour of water intake gate steel structures with different protective measures was investigated. Five material alternatives were taken for investigation, including: imported and recycled stainless steel, carbon steel with hot zinc spraying, painting and composite coatings. Results of corrosion rate for carbon steel, SUS 304, hot zinc spray coats in three water systems of Mekong river basin (saline, blackish and fresh) were also presented. Corrosion rate of carbon steel decreased with decreasing salinity in the investigated water environments. Meanwhile, these values for zinc coated steel, behaved by another way. Environmental data for these systems were filed and discussed in relation with corrosion characteristics. Method of Life Cycle Assessment (LCA) was applied in materials selection for water intake gate construction. From point of Life Cycle Cost (LCA) the following ranking was obtained: Zinc sprayed steel < Recycled stainless steel < Composite coated steel < Painting steel < SUS 304 From investigated results, hot zinc spray coating has been applied as protective measure for steel structures of water intake systems in Mekong river basin.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.81-87
• /
• 1989

A cellular array multiplier for performing the multiplication of two elements in the finite field GF($2^m$) is presented in this paper. This multiplier is consisted of three operation part ; the multiplicative operation part, the modular operation part, and the primitive irreducible polynomial operation part. The multiplicative operation part and the modular operation part are composed by the basic cellular arrays designed AND gate and XOR gate. The primitive iirreducible operation part is constructed by XOR gates, D flip-flop circuits and a inverter. The multiplier presented here, is simple and regular for the wire routing and possesses the properties of concurrency and modularity. Also, it is expansible for the multiplication of two elements in the finite field increasing the degree m and suitable for VLSI implementation.