• 한국환경과학회지
• /
• 제12권1호
• /
• pp.35-40
• /
• 2003

With increasing population densities in cities, underground facilities and entertainment locations are proliferating at a rapid pace in efforts to maximize the use of land. The purpose of this study is to evaluate CO concentration level of subway stations having underground platforms in Busan Metropolitan City, from September to November 2000, over seven times. The places of inquiry include Yonsan-dong station, Somyon station, Busan station, Nampo-dong station and Dusil station. The samplings were conducted at three points of each station, i.e. gates, ticket gates, and platforms. The component of CO concentration is the main elements of indoor air quality evaluation. The total concentrations and average concentrations of CO were the higher at the Somyon station. The distribution of CO concentrations at each station, generally was higher at gate than ticket gates and platforms. The I/O ratios(I-platforms, 0-gates) were expressed highly than 1 at the Yonsan-dong station, Busan station, Nampo-dong station and were lower than 1 at the others.

• 핵의학기술
• /
• 제13권3호
• /
• pp.61-66
• /
• 2009

목적: 사구체여과율(Glomerular Filtration Rate, GFR)은 신장 기능의 평가, 의심되는 신장질환의 진단 및 만성적인 신질환에서의 질병의 경과 관찰에 중요한 지표가 되며 다양한 방법을 이용하여 측정할 수 있다. 본 연구에서는 Gates 방법으로 측정되는 사구체여과율, 혈청 크레아티닌을 기초로 한 Cockcroft-Gault (C-G), Modification of Diet in Renal Disease (MDRD) 공식으로 계산한 사구체여과율을 비교하고자 하였다. 실험재료 및 방법: 18세 이상의 다양한 신기능을 가진 217명(남자 127명, 여자 90명, 평균 연령 $51.3{\pm}16.9$세)을 대상으로 하였다. $^{99m}Tc$-DTPA GFR과 혈청 크레아티닌(Serum Cr)을 기초로 한 C-G공식, MDRD 공식으로 계산한 사구체여과율을 비교 분석하였다. 결과: $^{99m}Tc$-DTPA (Gates) GFR은 C-G공식(r=0.864, p<0.0001) 및 MDRD 공식(r=0.831, p<0.0001)과 각각 유의한 상관관계가 있었고, C-C 공식과 MDRD 공식을 이용한 사구체 여과율 사이에도 상관관계가 우수하였다(r=0.933, p<0.0001). 혈청 크레아티닌의 평균은 $3.0{\pm}3.1\;mg/dL$으로 정상 신기능(Scr<1.5mg/dL) 환자에서 $^{99m}Tc$-DTPA GFR (Gates)과 C-G공식(p<0.0001), MDRD 공식(p<0.0001)은 통계적으로 유의하였다. 경증 신부전(Scr 1.5~4.0 mg/dL) 환자에서 Tc-99m DTPA (Gates) GFR과 C-G 공식(p=0.181), MDRD 공식(p=0.127)은 유의한 차이는 없었다. 중증 신부전(Scr>4.0 mg/dL) 환자에서 $^{99m}Tc$-DTPA (Gates) GFR과 C-G 공식(p<0.0001), MDRD 공식(p<0.0001)은 통계적으로 유의하였다. 결론: Gates 방법을 이용한 사구체여과율, C-G, MDRD 공식으로 계산한 사구체여과율 사이에 유의한 상관관계를 확인하였다. 정상 신기능 환자에서 $^{99m}Tc$-DTPA (Gates) GFR은 C-G, MDRD 공식보다 각각 낮았다. 경증 신부전 환자에서 $^{99m}Tc$-DTPA (Gates) GFR과 C-G 공식, MDRD 공식으로 계산한 사구체여과율은 유사하였고, 중증 신부전 환자에서 $^{99m}Tc$-DTPA (Gates) GFR은 C-G, MDRD 공식에 비해 사구체여과율을 과대평가하였다. 신기능의 정도에 따라 사구체여 과율을 평가하는데 있어 어떠한 측정방법이 더 우월한지는 분명하지 않다.

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.347-359
• /
• 2017

Blast resistant gates are required to be lightweight and able to mitigate extreme loading effect. This may be achieved through innovative design of a gate and its supporting frame. The first is well covered in literature while the latter is often overlooked. The design of supporting frame depends mainly on the boundary conditions and corresponding reaction forces. The later states the novelty and the aim of this paper, namely, the analysis of reaction forces in supporting structure of rectangular steel gates subjected to "far-field explosions". Flat steel plate was used as simplified gate structure, since the focus was on reaction forces rather than behaviour of gate itself. The analyses include both static and dynamic cases using analytical and numerical methods to emphasize the difference between both approaches, and provide some practical hints for engineers. The comprehensive study of reaction forces presented here, cover four different boundary conditions and three length to width ratios. Moreover, the effect of explosive charge and stand-off distance on reaction forces was also covered. The analyses presented can be used for a future design of a possible "blast absorbing supporting frame" which will increase the absorbing properties of the gate. This in return, may lead to lighter and more operational blast resistant gates.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권4호
• /
• pp.269-282
• /
• 2021

This review aimed to assess and compare the outcomes of the anesthetic efficacy of inferior alveolar nerve block (IANB) and Gow-Gates mandibular nerve block (GGMNB) in patients with symptomatic irreversible pulpitis. A descriptive systematic review of quantitative research was conducted wherein the "Preferred Reporting Items for Systematic Reviews (PRISMA)" was adopted, and the Problem/Patient/Population, Intervention/Indicator, Comparison, Outcome (PICO) criteria were used to structure the research question. A literature search was performed using PubMed/Medline, Cochrane Library, Google Scholar, and Ovid. Selection criteria were applied for populations over nine years of age, of either sex, with irreversible pulpitis, and articles published in English regarding conventional IANB or IANB and Gow-Gates techniques between 2009 and 2019. Prospective randomized clinical trials or randomized controlled trials were included in the review, in which anesthetic efficacy or success was measured. After screening, four articles were included. Three studies were randomized clinical trials, and two were randomized controlled trials. The validity and reliability of the individual studies were examined. There was evidence of the higher efficacy of the GGMNB technique than that of the IANB technique. However, both techniques can be mastered through training.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• 한국정보통신학회논문지
• /
• 제26권5호
• /
• pp.682-687
• /
• 2022

터널링 전계효과 트랜지스터(tunneling field-effect transistor; TFET)로 적층된 3차원 적층형 집적회로(monolithic 3D integrated-circuit; M3DIC)에 대한 연구 결과를 소개한다. TFET는 MOSFET(metal-oxide-semiconductor field-effect transistor)와 달리 소스와 드레인이 비대칭 구조이므로 대칭구조인 MOSFET의 레이아웃과 다르게 설계된다. 비대칭 구조로 인해서 다양한 인버터 구조 및 레이아웃이 가능하고, 그 중에서 최소 금속선 레이어를 가지는 단순한 인버터 구조를 제안한다. 비대칭 구조의 TFET를 순차적으로 적층한 논리 게이트인 NAND 게이트, NOR 게이트 등의 M3DIC의 구조와 레이아웃을 제안된 인버터 구조를 바탕으로 제안한다. 소자와 회로 시뮬레이터를 이용해서 제안된 M3D 논리게이트의 전압전달특성 결과를 조사하고 각 논리 게이트의 동작을 검증한다. M3D 논리 게이트 별 셀 면적은 2차원 평면의 논리게이트에 비해서 약 50% 감소된다.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권3호
• /
• pp.301-310
• /
• 2017

양자점 셀룰라 오토마타(QCA: quantum-dot cellular automata)는 나노 크기의 셀을 이용하여 다양한 연산을 수행하며, 매우 빠른 연산속도와 적은 전력손실로 차세대 기술로 떠오르고 있다. 본 논문에서는 QCA 상에서 새로운 유니버셜 게이트(universal gate)를 제안한다. 또한, 유니버셜 게이트를 이용하여 시공간 효율성 측면에서 우수한 XOR 게이트를 제안한다. 유니버셜 게이트는 자기 자신으로 모든 기본 논리 게이트를 만들어 낼 수 있는 게이트이다. 한편, 제안된 유니버셜 게이트는 기본 셀과 회전된 셀을 활용하여 설계한다. 제안된 유니버셜 게이트의 회전된 셀은 3-입력 다수결게이트 구조의 중앙부에 위치한다. 3-입력 다수결 게이트를 이용하여 XOR 게이트를 설계할 때는 5개 이상의 3-입력 다수결 게이트가 사용되지만, 본 논문에서는 3개의 유니버셜 게이트를 사용하여 XOR 게이트를 제안한다. 제안하는 XOR 게이트는 기존의 XOR 게이트보다 사용된 게이트 수가 줄었으며 설계 면적이나 소요 클럭면에서 우수함을 확인할 수 있다.

• 인문언어
• /
• 제7집
• /
• pp.123-155
• /
• 2005

This paper concerns different forms of poetic thinking, each of which attempts to investigating truth of being on the ground of its idiosyncratic feature. The horizon evoked via these practices, however, is the Absolute where any plausibility of communication be fundamentally blocked off. Poetry, for instance, relinquishes its semantic auto-referentiality in order to be expressive of something unsayable. Poetic diction, coming-into-being, and sound with no meaning are those three expressive modes that I will examine in terms of the so-called "poetic thinking."

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.189-190
• /
• 2015

This paper investigates an economic and highly efficient power converter topology and its modulation scheme for 60kW rapid EV charger system. The target system consists of three-phase three-switch buck-type rectifier topology. A new Carrier Based PWM scheme along with its simple implementation using logic gates is introduced in this paper. This PWM scheme replaces the diode rectifier equivalent switching state with an active switching state producing the effectively same current flowing path. As a result, the distortion of input current during the polarity reversal of capacitor line voltage can be mitigated. The proposed modulation technique is confirmed through simulation verification. The proposed modulation technique and its implementation scheme can expand the operation range of the three-phase three-switch buck-type rectifier having ac input and capacitor ripple current of high quality.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.361-365
• /
• 2009

This paper has been presented the transport characteristics of FinFET using the analytical potential model based on the Poisson's equation in subthreshold and threshold region. The threshold voltage is the most important factor of device design since threshold voltage decides ON/OFF of transistor. We have investigated the variations of threshold voltage and drain induced barrier lowing according to the variation of geometry such as the length, width and thickness of channel. The analytical potential model derived from the three dimensional Poisson's equation has been used since the channel electrostatics under threshold and subthreshold region is governed by the Poisson's equation. The appropriate boundary conditions for source/drain and gates has been also used to solve analytically the three dimensional Poisson's equation. Since the model is validated by comparing with the three dimensional numerical simulation, the subthreshold current is derived from this potential model. The threshold voltage is obtained from calculating the front gate bias when the drain current is $10^{-6}A$.