• Journal of Environmental Science International
• /
• v.12 no.1
• /
• pp.35-40
• /
• 2003

With increasing population densities in cities, underground facilities and entertainment locations are proliferating at a rapid pace in efforts to maximize the use of land. The purpose of this study is to evaluate CO concentration level of subway stations having underground platforms in Busan Metropolitan City, from September to November 2000, over seven times. The places of inquiry include Yonsan-dong station, Somyon station, Busan station, Nampo-dong station and Dusil station. The samplings were conducted at three points of each station, i.e. gates, ticket gates, and platforms. The component of CO concentration is the main elements of indoor air quality evaluation. The total concentrations and average concentrations of CO were the higher at the Somyon station. The distribution of CO concentrations at each station, generally was higher at gate than ticket gates and platforms. The I/O ratios(I-platforms, 0-gates) were expressed highly than 1 at the Yonsan-dong station, Busan station, Nampo-dong station and were lower than 1 at the others.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.61-66
• /
• 2009

Purpose: Glomerular filtration rate (GFR) is considered as the best overall index for the level of renal function, diagnosis of doubtful kidney disease, progress observation from chronic kidney disease and is measured with the various methods. In this study, We measured standard GFR by Gates method and attempted to compare the result with serum creatinin-based, Cockcroft-Gault(C-G) formula and Modification of Diet in Renal Disease (MDRD) formula. Materials and methods: 217 patients (127 men, 90 women, mean age $51.3{\pm}16.9$) with various renal function were examined. we compared the GFR using $^{99m}Tc$-DTPA (Gates), C-G formula and MDRD formula. Results: Significant correlations were noted between 2 different GFR estimates (from C-G formula: r=0.864, p<0.0001, MDRD formula: r=0.831, p<0.0001) and $^{99m}Tc$-DTPA (Gates) GFR. Average of serum creatinine (Scr) was measured with $3.0{\pm}3.1\;mg/dL$, In patients with normal renal function (Scr<1.5 mg/dL), $^{99m}Tc$-DTPA (Gates) GFR was statistically significant to C-G formula (p<0.0001) and MDRD formula (p<0.0001). In patients with mild to moderate renal insufficiency (1.5$^{99m}Tc$-DTPA (Gates) GFR was not statistically significant to C-G formula (p=0.181) and MDRD formula (p=0.127). In patients with severe renal insufficiency (Scr>4.0mg/dL), $^{99m}Tc$-DTPA (Gates) GFR was statistically significant to C-G formula and MDRD formula (p<0.0001). Conclusions: Glomerular filtration rate using Gates method was closly correlated to C-G formula and MDRD formula. In patients with normal renal function, $^{99m}Tc$-DTPA (Gates) GFR was significantly lower than C-G formula and MDRD formula. In patients with mild to moderate renal insufficiency, $^{99m}Tc$-DTPA (Gates) GFR was simmilar with C-G formula and MDRD formula. In patients with severe renal insufficiency, $^{99m}Tc$-DTPA (Gates) GFR was significantly higher than C-G formula and MDRD formula. None of the three different methods was clearly superior to the others.

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.347-359
• /
• 2017

Blast resistant gates are required to be lightweight and able to mitigate extreme loading effect. This may be achieved through innovative design of a gate and its supporting frame. The first is well covered in literature while the latter is often overlooked. The design of supporting frame depends mainly on the boundary conditions and corresponding reaction forces. The later states the novelty and the aim of this paper, namely, the analysis of reaction forces in supporting structure of rectangular steel gates subjected to "far-field explosions". Flat steel plate was used as simplified gate structure, since the focus was on reaction forces rather than behaviour of gate itself. The analyses include both static and dynamic cases using analytical and numerical methods to emphasize the difference between both approaches, and provide some practical hints for engineers. The comprehensive study of reaction forces presented here, cover four different boundary conditions and three length to width ratios. Moreover, the effect of explosive charge and stand-off distance on reaction forces was also covered. The analyses presented can be used for a future design of a possible "blast absorbing supporting frame" which will increase the absorbing properties of the gate. This in return, may lead to lighter and more operational blast resistant gates.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.4
• /
• pp.269-282
• /
• 2021

This review aimed to assess and compare the outcomes of the anesthetic efficacy of inferior alveolar nerve block (IANB) and Gow-Gates mandibular nerve block (GGMNB) in patients with symptomatic irreversible pulpitis. A descriptive systematic review of quantitative research was conducted wherein the "Preferred Reporting Items for Systematic Reviews (PRISMA)" was adopted, and the Problem/Patient/Population, Intervention/Indicator, Comparison, Outcome (PICO) criteria were used to structure the research question. A literature search was performed using PubMed/Medline, Cochrane Library, Google Scholar, and Ovid. Selection criteria were applied for populations over nine years of age, of either sex, with irreversible pulpitis, and articles published in English regarding conventional IANB or IANB and Gow-Gates techniques between 2009 and 2019. Prospective randomized clinical trials or randomized controlled trials were included in the review, in which anesthetic efficacy or success was measured. After screening, four articles were included. Three studies were randomized clinical trials, and two were randomized controlled trials. The validity and reliability of the individual studies were examined. There was evidence of the higher efficacy of the GGMNB technique than that of the IANB technique. However, both techniques can be mastered through training.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.682-687
• /
• 2022

In this paper, the research results on monolithic three-dimensional integrated-circuit (M3DICs) stacked with tunneling field effect transistors (TFETs) are introduced. Unlike metal-oxide-semiconductor field-effect transistors (MOSFETs), TFETs are designed differently from the layout of symmetrical MOSFETs because the source and drain of TFET are asymmetrical. Various monolithic 3D inverter (M3D-INV) structures and layouts are possible due to the asymmetric structure, and among them, a simple inverter structure with the minimum metal layer is proposed. Using the proposed M3D-INV, this M3D logic gates such as NAND and NOR gates by sequentially stacking TFETs are proposed, respectively. The simulation results of voltage transfer characteristics of the proposed M3D logic gates are investigated using mixed-mode simulator of technology computer aided design (TCAD), and the operation of each logic circuit is verified. The cell area for each M3D logic gate is reduced by about 50% compared to one for the two-dimensional planar logic gates.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.301-310
• /
• 2017

Quantum-dot cellular automata(QCA) is an alternative technology for implementing various computation, high performance, and low power consumption digital circuits at nano scale. In this paper, we propose a new universal gate in QCA. By using the universal gate, we propose a novel XOR gate which is reduced time/hardware complexity. The universal gate can be used to construct all other basic logic gates. Meanwhile, the proposed universal gate is designed by basic cells and a rotated cell. The rotated cell of the proposed universal gate is located at the central of 3-input majority gate structure. In this paper, we propose an XOR gate using three universal gates, although more than five 3-input majority gates are used to design an XOR gate using the 3-input majority gate. The proposed XOR gate is superior to the conventional XOR gate in terms of the total area and the consumed clock because the number of gates are reduced.

• Lingua Humanitatis
• /
• v.7
• /
• pp.123-155
• /
• 2005

This paper concerns different forms of poetic thinking, each of which attempts to investigating truth of being on the ground of its idiosyncratic feature. The horizon evoked via these practices, however, is the Absolute where any plausibility of communication be fundamentally blocked off. Poetry, for instance, relinquishes its semantic auto-referentiality in order to be expressive of something unsayable. Poetic diction, coming-into-being, and sound with no meaning are those three expressive modes that I will examine in terms of the so-called "poetic thinking."

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.189-190
• /
• 2015

This paper investigates an economic and highly efficient power converter topology and its modulation scheme for 60kW rapid EV charger system. The target system consists of three-phase three-switch buck-type rectifier topology. A new Carrier Based PWM scheme along with its simple implementation using logic gates is introduced in this paper. This PWM scheme replaces the diode rectifier equivalent switching state with an active switching state producing the effectively same current flowing path. As a result, the distortion of input current during the polarity reversal of capacitor line voltage can be mitigated. The proposed modulation technique is confirmed through simulation verification. The proposed modulation technique and its implementation scheme can expand the operation range of the three-phase three-switch buck-type rectifier having ac input and capacitor ripple current of high quality.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.361-365
• /
• 2009

This paper has been presented the transport characteristics of FinFET using the analytical potential model based on the Poisson's equation in subthreshold and threshold region. The threshold voltage is the most important factor of device design since threshold voltage decides ON/OFF of transistor. We have investigated the variations of threshold voltage and drain induced barrier lowing according to the variation of geometry such as the length, width and thickness of channel. The analytical potential model derived from the three dimensional Poisson's equation has been used since the channel electrostatics under threshold and subthreshold region is governed by the Poisson's equation. The appropriate boundary conditions for source/drain and gates has been also used to solve analytically the three dimensional Poisson's equation. Since the model is validated by comparing with the three dimensional numerical simulation, the subthreshold current is derived from this potential model. The threshold voltage is obtained from calculating the front gate bias when the drain current is $10^{-6}A$.