• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1114-1120
• /
• 2009

전도성을 띄는 다양한 도전사(electro-thread)의 도전율을 분석하여, 그 특성에 맞게 T 매칭 구조가 없는 글자 모양에 T매칭 구조를 인가하여 닦을 수 있는 자수형 UHF RFID tag 안테나를 설계하였다. 도전사를 이용한 RFID tag 안테나는 기존의 태그와는 달리 착용감과 구부러짐의 변화에 문제가 없어 옷에 자수하여 입을 수 있는 안테나로 사용되기가 쉽다. 자수형 태그의 모양은 일반 의류에 적용하기 쉬운 영어 알파벳 'F'와 한글 자음 'ㄹ' 형태로 설계하였다. 설계된 태그를 최적화하여 제작하였으며 제작한 태그의 특성과 인식 거리 패턴을 측정하였다. 또한 물 비눗물과 소금물에 태그가 젖었을 때 인식 거리를 측정하였다.

• 소성∙가공
• /
• 제20권8호
• /
• pp.581-587
• /
• 2011

The production of high-precision micro-sized screws, used to fasten parts of micro devices, generally utilizes a cold thread-rolling process and two flat dies to create the teeth. The process is fairly complex, involving parameters such as die shape, die alignment, and other process variables. Thus, up-front finite-element(FE) simulation is often used in the system design procedure. The final goal of this paper is to produce high-precision screw with a diameter of $800{\mu}m$ and a thread pitch of $200{\mu}m$ (M0.8${\times}$P0.2) by a cold thread rolling process. Part I is a first-stage effort, in which FE simulation is used to establish process parameters for thread rolling to produce micro-sized screws with M1.4${\times}$P0.3, which is larger than the ultimate target screw. The material hardening model was first determined through mechanical testing. Numerical simulations were then performed to find the effects of such process parameters as friction between work piece and dies, alignment between dies and material. The final shape and dimensions predicted by simulation were compared with experimental observation.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.391-396
• /
• 2009

본 연구에서는 전조공정의 수치해석을 수행하였다. 해석을 이용한 공정 인자 설계에 앞서서, 효율적이고 신뢰성 있는 해석을 위한 해석 조건에 대하여 연구를 수행하였다. 치형의 개수와 요소의 수에 대한 해석 결과를 바탕으로 해석의 정도를 보장하고 효율적으로 해석을 수행할 수 있는 조건을 설정하였다. 그리고, 프랭크 각도와 치형의 끝단부 라운드 등의 금형의 형상과 성형 온도가 유효 응력, 유효 변형율, 전조력, 그리고 크랙 발생에 미치는 영향을 알아보았다. 해석은 DEFORM-3D를 이용하여 수행하였다. 프랭크 각도와 치형의 끝단 부 라운드는 전조력에 영향을 미치는 것을 확인할 수 있었으며, 성형 온도 조건에 따라서 유효 변형률과 전조력, 그리고 크랙을 예상 할 수 있었다.

• 복식
• /
• 제67권2호
• /
• pp.88-100
• /
• 2017

This study is for the textiles of at Sun Am Temple and characteristic of embroidery. Tak Ui was composed of orange body and green upper cover, and had no strings. The body plate was covered with embroidery, with Gauze base, and upper part was appliqued, by cutting dragon pattern, cloud pattern on satin damask. The thread for embroidery was silk floss, silk twisted thread, rapped gold thread, and rapped silk thread. For padding, it was used cotton thread in the part of dragon's scales. It was used satin stitch, outline stitch, split stitch, couching, and counted stitch, etc. as method of embroidery. In particular, it embroidered counted stitch of diamond shape consecutively on the whole of Tak Ui, it does so with counted stitch of same effect of weaving Brocade in the part of cloud. Besides, it is one of the characteristic for couching rapped silk thread. Such lead embroidery is the popular method in the Ming dynasty of China, in the 16~17 century. The design of Tak Ui is dragon, cloud, and wave in the theme. In the center, 'Seong-su-man-nyeon' was placed on the heads of dragon. This is similar to Dragon Robe of Four-petalled medallion patterns, period of Ming dynasty in China. Therefore, it confirmed that Tak Ui was remodeled the embroidered textiles, made for royal robe, originally, with Tak Ui at temple.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.547-554
• /
• 2014

Implant success is achieved by the synergistic combination of numerous biomechanical factors. This report examines the mechanical aspect of implants. In particular, it is focused on macrodesign such as thread shape, pitch, width and depth, and crestal module of implants. This study reviews the literature regarding the effect of implant thread geometry on primary stability and osseointegration under immediate loading. The search strategy included both in vitro and in vivo studies published in the MEDLINE database from January 2000 to June 2014. Various geometrical parameters are analyzed to evaluate their significance for optimal stress distribution, implant surface area, and bone remodeling responses during the process of osseointegration.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.115-121
• /
• 2015

PURPOSE. This study aimed to evaluate the effect of implant thread depth on primary stability in low density bone. MATERIALS AND METHODS. The insertion torque was measured by inserting Ti implants with different thread depths into solid rigid polyurethane blocks (Sawbones) with three different bone densities ($0.16g/cm^3$, $0.24g/cm^3$, and $0.32g/cm^3$). The insertion torque value was evaluated with a surgical engine. The static compressive strength was measured with a universal testing machine (UTM) and the Ti implants were aligned at $30^{\circ}$ against the loading direction of the UTM. After the static compressive strength test, the Ti implants were analyzed with a Measurescope. RESULTS. The Ti implants with deeper thread depth showed statistically higher mean insertion torque values (P<.001). Groups A and group B had similar maximum static compressive strengths, as did groups C and D (P>.05). After the static compressive strength, the thread shape of the Ti implants with deeper thread depth did not show any breakage but did show deformation of the implant body and abutment. CONCLUSION. The implants with deeper thread depth had higher mean insertion torque values but not lower compressive strength. The deep threads had a mechanical stability. Implants with deeper thread depth may increase the primary stability in areas of poor quality bone without decreasing mechanical strength.

• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.756-763
• /
• 2005

The applicability and productivity of hydroforming process can be increased by combining pre- and post-forming processes such as the bending, piercing and embedding process. For the fabrication of automotive parts, the hollow bodies with connecting nuts are widely used to connect parts together. Hollow body with connecting nuts has been conventionally fabricated by welding nuts or screwing in autobody screws. It requires multiple steps and devices fur the welding and/or screwing Therefore in this study, hydro-embedding process that combines the hydraulic embedding of connecting element(nut) with hydroforming process is investigated. Studies on the hydro-embedding technology have been performed to optimize the shape of the connecting element by analyzing the deformed mode of the embedded tube The effects of the shape of the screw tip, screw thread and shape of thread on the connection force between the tube and the connecting element have been investigated to optimize the shape of connecting element. Finite element analysis has also been performed to provide deformation behaviors of the tube surrounding a hole produced by hydro-embedding.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.523-528
• /
• 2015

As the sizes of mobile phones and watch phones decrease, the joining bolt for the products should also be decreased to a miniature size. However, the miniature-sized bolt has to support sufficient joining and anti-releasing torque to keep the product fastened. In this study, the thread shapes are designed to improve anti-releasing performance of bolts. Especially, when bolt materials is stronger than nut materials, the design of thread shapes is needed, like bolt for wood, to improve the fastening capability. Through the joining and releasing analyses of bolts, the thread shapes for SUS302 bolt and Mg alloy nut are newly designed. It was shown that the newly designed bolt has 20 % higher anti-releasing torque and 35% lower torque loosening slope compared to the standard bolt.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.17-18
• /
• 2003

Drop deformation in a cylindrical contraction geometry, characterized here by the formation of a thread of drop fluid in the contraction, is predicted using a Volume-of-Fluid numerical technique. The predicted drop shape is found to closely follow the observed deformation. A capillary instability in the developing drop thread in the contraction was predicted, in agreement with experimental observation.

• 소성∙가공
• /
• 제21권3호
• /
• pp.179-185
• /
• 2012

In this paper, it is proposed to produce high precision screws with a diameter of $800{\mu}m$ and a thread pitch of $200{\mu}m$ ($M0.8{\times}P0.2$) by means of a cold thread rolling process. In this part II of the study, the focus is on the production and reliability testing of the prototype $M0.8{\times}P0.2$ micro-screw. Designs for two flat dies were developed with the aid of the literature and previous studies. Process parameters during the cold thread rolling process were established through FE simulations. The simulation results showed that the threads of the micro-screw are completely formed through the rolling process. Prototype $M0.8{\times}P0.2$ micro-screw were fabricated with a high precision thread rolling machine. In order to verify the simulation results, the deformed shape and dimensions obtained from the experiment were compared with those from the simulations. Hardness and failure torque of the fabricated micro-screw were also measured. The values obtained indicate that the CAE based process design used in this paper is very appropriate for the thread rolling of micro-sized screws.