• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1165-1170
• /
• 2005

In order to perform the spatial buckling analysis of the curved beam element with nonsymmetric thin-walled cross section, exact static stiffness matrices are evaluated using equilibrium equations and force-deformation relations. Contrary to evaluation procedures of dynamic stiffness matrices, 14 displacement parameters are introduced when transforming the four order simultaneous differential equations to the first order differential equations and 2 displacement parameters among these displacements are integrated in advance. Thus non-homogeneous simultaneous differential equations are obtained with respect to the remaining 8 displacement parameters. For general solution of these equations, the method of undetermined parameters is applied and a generalized linear eigenvalue problem and a system of linear algebraic equations with complex matrices are solved with respect to 12 displacement parameters. Resultantly displacement functions are exactly derived and exact static stiffness matrices are determined using member force-displacement relations. The buckling loads are evaluated and compared with analytic solutions or results by ABAQUS's shell element.

• Structural Engineering and Mechanics
• /
• 제81권2호
• /
• pp.231-242
• /
• 2022

Numerical solutions for the linear buckling behavior of thin-walled circular hollow section members (CHS) with and without longitudinal stiffeners are presented using the semi-analytical finite strip method (SAFSM) which is developed based on Marguerre's shallow shell theory and Kirchhoff's assumption. The formulation of 3-nodal line finite strip is presented. The CHS members subjected to uniform axial compression, uniform bending, and combination of compression and bending. The buckling behavior of CHS is investigated through buckling curves which relate buckling stresses to lengths of the member. Effects of longitudinal stiffeners are studied with the change of its dimensions, position, and number.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.297-300
• /
• 2009

The roll forming process is often used to manufacture long, thin-walled products such as a pipe. The final cross-section is a comparatively simple open-channel, a closed tube section or a complex profile with several bends. In recent years, that process is often applied to the bumper beam in the automotive industries. In this study, a optimal Center Floor Cross Member manufacturing technology, model deign and proper roll-pass sequences can be suggested by forming number of roll-pass and bending angle, and also effects of the process parameters on the final shape formed by roll forming defects were evaluated.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.113-125
• /
• 2007

탄성지반 위의 비대칭 개/폐단면의 박벽보에 대한 탄성해석 및 안정성해석을 수행하기 위해 엄밀한 강성행렬을 계산하기 위한 개선된 수치해석 기법을 새롭게 제시한다. 본 연구에서 제시한 수치해석기법은 박벽보의 안정성 해석을 위한 엄밀한 강성행렬을 산정하는 선행된 수치해석기법의 결점을 보완하고 있다. 본 연구에서 제시한 기법은 일반화된 고유치 문제에 관한 해를 얻는 것으로서 일반화된 14개의 변위에 대한 고유치 문제를 평형방정식에 관한 1차의 연립상미분 방정식으로 변환함으로써 얻어진다. '0'의 고유치에 대응되는 변위파라미터에 대해 다항식이 가정되며 항등조건으로부터 '0'의 고유치의 수와 동일한 미결정된 파라미터를 포함하는 고유 모우드가 결정되고 이로부터 'non-zero'의 고유치와 다항식의 해를 조합함으로써 엄밀한 변위함수가 결정된다. 이후 부재력-변위의 관계를 이용하여 엄밀한 강성행렬을 산정하게 된다. 본 연구에서 개발한 수치해석 기법의 타당성을 검증하기 위해서 본 연구에서 제시한 이론에 의한 해를 제시하고 보요소 및 쉘요소을 사용한 유한요소해와 비교 검토한다.

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.509-518
• /
• 2002

비대칭 단면을 갖는 박벽보의 3차원 휨-배틂 좌굴해석 및 정적해석을 위하여, 평형방정식과 힘-변위 관계식을 이용하여 엄밀한 정적요소강성행렬을 수치적으로 산정하는 개선된 기법을 제시한다. 먼저 14개의 변위피라미터를 도입하여 고차의 연립미분방정식을 1차 연립미분방정식으로 변환하고, 복소수 영역에서 선형고유치문제를 해를 구한다. 이 경우 동적강성행렬을 산정하는 경우와는 달리 복수개의 '영'의 고유치가 발생한다. 이에 대응하는 변위피라미터의 다항식을 항등식 조거능로부터 구하고, 이를 고유치와 결합하여 박벽보 요소의 엄밀한 처짐함수를 구한다. 이렇게 구한 엄밀한 처짐함수에 재단력-변위 관계식을 적용하여 세가지 초기단면력 조건에 대응하는 엄밀한 정적요소강성행렬을 산정한다. 본 방법의 타당성을 보이기 위하여 비대칭 박벽보의 좌굴하중과 처짐값을 계산하고 해석해나 ABAQUS 쉘요소를 이용한 해석결과 및 직선보요소를 사용한 유한요소해의 결과와 비교, 검증한다.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.701-715
• /
• 2020

Steel storage racks are lightweight structures, made of thin-walled cold-formed members, whose behaviour is remarkably influenced by local, distortional and overall buckling phenomena, frequently mutually combined. In addition, the need of an easy and rapid erection and reconfiguration of the skeleton frame usually entails the presence of regular perforations along the length of the vertical elements (uprights). Holes and slots strongly influence their behaviour, whose prediction is however of paramount importance to guarantee an efficient design and a safe use of racks. This paper focuses on the behaviour of isolated uprights subjected to both axial load and bending moments, differing for the cross-section geometry and for the regular perforation systems. According to the European standards for routine design, four alternatives to evaluate the bending moment-axial load resisting domains are shortly discussed and critically compared in terms of member load carrying capacity.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.437-454
• /
• 2014

The influence of spacers on the behaviour and ultimate capacity of intermediate length CFS open section columns under axial compression is investigated in this paper. The focus of the research lies in the cross- section predominantly, failed by distortional buckling. This paper made an attempt to either delay or eliminate the distortional buckling mode by the introduction of transverse elements referred herein as spacers. The cross-sections investigated have been selected by performing the elastic buckling analysis using CUFSM software. The test program considered three different columns having slenderness ratios of 35, 50 & 60. The test program consisted of 14 pure axial compression tests under hinged-hinged end condition. Models have been analysed using finite element simulations and the obtained results are compared with the experimental tests. The finite element package ABAQUS has been used to carry out non-linear analyses of the columns. The finite element model incorporates material, geometric non-linearities and initial geometric imperfection of the specimens. The work involves a wide parametric study in the column with spacers of varying depth and number of spacers. The results obtained from the study shows that the depth and number of spacers have significant influence on the behaviour and strength of the columns. Based on the nonlinear regression analysis the design equation is proposed for the selected section.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.177-182
• /
• 2003

The front-end side members of automobiles absorb most of the energy in a case of front-end collision. The front-end side members are required to have a high stiffness together with easiness to collapse sequentially to absorb more impact energy. The axial static collapse test (5mm/min) was conducted by using UTM for form different types of members which have different cross section shapes; single hat, single cap, double cap, and double hat. The single hat shaped section member has the typical standard section, which the double hat shape section has a symmetry in the center to have more stiffness. As a result of the test, the energy absorbing characteristic was analyzed for different section shapes. It turned out that the change of section shape influence the absorbing energy, the mean collapse load and the maximum collapse load, and the relation between the change of section shape and the collapse mode.

• 한국강구조학회 논문집
• /
• 제14권2호
• /
• pp.349-356
• /
• 2002

현재 우리나라 스틸하우스 건설에 사용하는 구조재는 SGC41 강종으로 제작된 보통 C-형강이나 Lip-C-형강이 주를 이루고 있으나 이 분야의 선진국가에서는 좌굴 강도가 높고 시공성이 좋은 고유의 단면 형상을 개발하여 사용하고 있다. 본 연구에서는 정량이면서 강도 및 강성이 높고 다양한 시공상 장점이 있는 고강도 신형상 박판냉간성형단면의 압축부재로서의 구조적인 고동과 성능을 연구하기 위하여 재료실험 및 압축실험을 수행하고 해석치와 비교하여 보았다.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.625-638
• /
• 2017

This paper presents a novel approach that describes the first-order (linear elastic) partial interaction analysis of members formed by multi-components based on the Generalised Beam Theory (GBT). The novelty relies on its ability to accurately model the partial interaction between the different components forming the cross-section in both longitudinal and transverse directions as well as to consider the cross-sectional deformability. The GBT deformations modes, that consist of the conventional, extensional and shear modes, are determined from the dynamic analyses of the cross-section represented by a planar frame. The partial interaction is specified at each connection interface between two adjacent elements by means of a shear deformable spring distributed along the length of the member. The ease of use of the model is outlined by an application performed on a multi-component member subjected to an eccentric load. The values calculated with an ABAQUS finite element model are used to validate the proposed method. The results of the numerical applications outline the influence of specifying different rigidities for the interface shear connection and in using different order of polynomials for the shape functions specified in the finite element cross-section analysis.