• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.36-44
• /
• 2007

The purpose of this study was to investigate thermal stability, reactivity, and bonding strength of existing epoxy resin mixed with the epoxidized soybean oil (ESBO) in order to use soybean oil economically. In the dry shear test, the marked strengths showed $30.5kgf/cm^2$ at the ratio of ESBO to epoxy resin 9 : 1 and $6.2kgf/cm^2$ at the ratio 8 : 2. The bonding strengths of the others, except mixing ratios 2 : 8 and 1 : 9, exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$. In the wet shear test, the result was $5.8kgf/cm^2$ at the ratio 9 : 1. There were no thickness swelling and moisture absorption in the water resistance of the film. The value of activation energy, Tg (${\Delta}E$), by DSC analysis showed between $110^{\circ}C$ and $120^{\circ}C$ through all ratios. Epoxy in the epoxy resin fully reacted with the hardener (TETA), but it is difficult to decide that epoxys in the ESBO were reacted directly with the hardener from FT-IR analysis. As the mixing ratio of ESBO increased, the thermal stabilities dropped from TGA analysis. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that the ESBO in the mixed adhesive of epoxy resin/ESBO played a role as an extending agent level of epoxy adhesive, and we were able to know that in order to utilize ESBO as an adhesive, a study should be performed on the condition of hardening, inducible of the hardening reaction.

• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.57-68
• /
• 2003

Effects of supplemental levels of Bomboo vinegar(BV) on growth performance, serum profile and meat quality in 15 Korean native Hanwoo cows was investigated. Concentrate diet was supplemented with Bamboo vinegar with 3% and 6% of the diet. Daily weight gain was increased slightly at 3% BV, but it was decreased in 6% BV. Feed intake was decreased(P<0.05) at 6% BV. Glucose concentration of serum profile was decreased(P<0.05) at 3% and 6% BV. Total protein and cholesterol concentrations were increased(P<0.05) at 3% and 6% BV. BUN concentration was increased(P<0.05) at 3% BV. In carcass characteristics the longissimus muscles of all BV treatments showed no significant(P<0.05) effects, but back fat thickness was decreased significantly(P<0.05) in 6% BV. Marbling score was increased significantly(P<0.05) at 3% BV, thus improving the meat quality. Cut meat production was not difference by treatment. Crude fat content of proximate chemical composition in longissimus muscle was increased(P<0.05) in 3% BV. Shear force and cholesterol contents were decreased(P<0.05) in 3% and 6% BV. The 16:0 of fatty acid composition in longissimus was decreased(P<0.05) whereas 18:1 was increased(P<0.05) at 3% and 6% BV. The composition of saturated fatty acids(SFA) was decreased(P< 0.05), whereas unsaturated fatty acids(USFA) was increased(P<0.05) in 3% BV. Odor and appearance of sensory evaluation were not difference by treatment. Taste was improved significantly (P<0.05) in 3% and 6% BV with the peculiar and savory taste of Hanwoo being more emphasized. The results of this experiment indicated that 3% BV improved the marbling score and crude fat content, decreased the shear force and cholesterol contents, increased the USFA composition, and improved the taste of sensory evaluation in Korean native Hanwoo cows.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.450-460
• /
• 2005

The aim of this study was to evaluate the effect of cavity shape, bond quality of bonding agent and volume of resin composite on shrinkage stress developed at the cavity floor. This was done by measuring the shear bond strength with respect to iris materials (cavity shape , adhesive-coated dentin as a high C-factor and Teflon-coated metal as a low C-factor), bonding agents (bond quality: $Scotchbond^{TM}$ Multi-purpose and Xeno III) and iris hole diameters (volume; 1mm or 3mm in $diameter{\times}1.5mm$ in thickness). Ninety-six molars were randomly divided into 8 groups ($2{\times}2{\times}2$ experimental setup). In order to simulate a Class I cavity, shear bond strength was measured on the flat occlusal dentin surface with irises. The iris hole was filled with Z250 restorative resin composite in a bulk-filling manner. The data was analyzed using three-way ANOVA and the Tukey test. Fracture mode analysis was also done When the cavity had high C-factor, good bond quality and large volume, the bond strength decreased significantly The volume of resin composite restricted within the well-bonded cavity walls is also be suggested to be included in the concept of C-factor, as well as the cavity shape and bond quality. Since the bond quality and volume can exaggerate the effect of cavity shape on the shrinkage stress developed at the resin-dentin bond, resin composites must be filled in a method, which minimizes the volume that can increase the C-factor.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2010

We have developed an in-situ benthic chamber (BelcI) for use in coastal studies that can be deployed from a small boat. It is expected that BelcI will be useful in studying the benthic boundary layer because of its flexibility. BelcI is divided into three main areas: 1) frame and body chamber, 2) water sampler, and 3) stirring devices, electric controller, and data acquisition technology. To maximize in-situ use, the frame is constructed from two layers that consist of square cells. All electronic parts (motor controller, pA meter, data acquisition, etc.) are low-power consumers so that the external power supply can be safely removed from the system. The hydrodynamics of BelcI, measured by PIV (particle image velocimetry), show a typical "radial-flow impeller" pattern. Mixing time of water in the chamber is about 30 s, and shear velocity ($u^*$) near the bottom layer was calculated at $0.32\;cm\;s^{-1}$. Measurements of diffusivity boundary layer thickness showed a range of $180-230\;{\mu}m$. Sediment oxygen consumption rate, measured in-situ，was $84\;mmol\;O_2\;m^{-2}\;d_{-1}$, more than two times higher than on-board incubation results. Benthic fluxes assessed from in-situ incubation were estimated as follows: nitrate + nitrite = $0.18\;{\pm}\;0.07\;mmol\;m^{-2}\;d^{-1}$ ammonium $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$ phosphate = $0.09\;{\pm}\;0.02\;mmol\;m^{-2}\;d^{-1}$ and silicate = $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.71-79
• /
• 2017

Purpose: Ni-Cr alloy does not contain Beryllium, causing the metal compound to form oxides in the furnace but by using Titanium as a chemical catalyst the forming of the oxides can be controlled, and by controlling the impurities formed on the metal surface, the possibility of the Ni-Cr alloy bond strength being increased can be analysed. Materials and Methods: Titanium was used as a chemical catalyst in the porcelain for the oxidation of beryllium-free metal (Ni-Cr) alloy. The T1 group, which does not use Titanium power as a chemical catalyst is a reference model for comparison. The T2 group and T3 group used 10 g and 20 g of Titanium power, respectively. They are fabricated to observe the shear bond strength and surface properties. There was no significance when One-way ANOVA analysis/Tukey Honestly Significant Difference Test was conducted for statistical analysis among groups (P > 0.05). Results: Results of measuring the three-point flexural bond strength of the Ni-Cr alloy and thickness of the oxide film. Experiment T3 using 20 g Titanium chemical catalyst: $39.22{\pm}3.41MPa$ and $6.66{\mu}m$, having the highest bond strength and thinness of oxide film. Experiment T2 using 10 g Titanium chemical catalyst: $34.65{\pm}1.39MPa$ and $13.22{\mu}m$. Experiment T1 using no Titanium chemical catalyst: $32.37{\pm}1.91MPa$ and $22.22{\mu}m$. Conclusion: The T2 and T3 experiments using Titanium chemical catalyst showed higher bond strength for the Ni-Cr alloy and lower thickness of oxide film than experiment T1, and the titanium catalyst being able to increase bond strength was observed.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.657-666
• /
• 2008

This study investigated the effects of dietary probiotics which contained antioxidant astaxanthin on growth performances and meat quality in two pigs farms. A total of 2,400 pigs were gilt and barrow with same number assigned to one of two treatments. The two treatments were control(commercial feed), treatment(probiotics 0.1% feed). Each treatment had 3 replicates. Weight gain, feed intake and feed efficiency were periodically recorded for 90 days. Survival ratio was shown 99.85% in treatment group. Average daily gain was higher in treatment group(0.91kg) than that of control(0.84kg). Back fat thickness was lower in treatment group than that of control, even though the treatment group tended to be higher carcass weight. The treatment group trended higher carcass weight, back fat thickness was lower in treatment group than control. The ratio of carcass grade A was shown higher in treatment than that of control, respectively. Treatment group showed higher value of fat content and water holding capacity. Treatment showed lower value than control in shear force and cooking loss. Hunter value(a and b) of treatment group in meat color was higher than control. Treatment group was lower cholesterol content than control. Control group was shown higher unsaturated fatty acid(stearic acid(C18:0)) value than treatment. Treatment group was shown lower saturated fatty acid(oleic acid(C18:1)) value than that of control. These results suggested that the supplementation of probiotics contained Phaffia rhodozyma could be used effectively for increase productivity of livestock industry.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.383-395
• /
• 2020

The stratigraphical position of the Haengmae Formation can provide clues towards solving the hot issue on the Silurian formation, also known as Hoedongri Formation. Since the 2010s, there have been several reports denying the Haengmae Formation as a lithostratigraphic unit. This study aimed to clarify the lithostratigraphic and chronostratigraphic significance of the Haengmae Formation. The distribution and structural geometry of the Haengmae Formation were studied through geologic mapping, and the correlation of relative geologic age and the absolute age was performed through conodont biostratigraphy and zircon U-Pb dating respectively. The representative rock of the Haengmae Formation is massive and yellow-yellowish brown pebble-bearing carbonate rocks with a granular texture similar to sandstone. Its surface is rough with a considerable amount of pores. By studying the mineral composition, contents, and microstructure of the rocks, they have been classified as pebble-bearing clastic rocks composed of dolomite pebbles and matrix. They chiefly comprise of euhedral or subhedral dolomite, and rounded, well-sorted fine-grained quartz, which are continuously distributed in the study area from Biryong-dong to Pyeongan-ri. Bedding attitude and the thickness of the Haengmae Formation are similar to that of the Hoedongri Formation in the north-eastern area (Biryong-dong to Haengmae-dong). The dip-direction attitudes were maintained 340°/15° from Biryong-dong to Haengmae-dong with a thickness of ca. 200 m. However, around the southwest of the studied area, the attitude is suddenly changed and the stratigraphic sequence is in disorder because of fold and thrust. Consequently, the formation is exposed to a wide low-relief area of 1.5 km × 2.5 km. Zircon U-Pb age dating results ranged from 470 to 449 Ma, which indicates that the Haengmae Formation formed during the Upper Ordovician or later. The pebble-bearing carbonate rock consisted of clastic sediments, suggesting that the Middle Ordovician conodonts from the Haengmae Formation must be reworked. Therefore, the above-stated evidence supports that the geologic age of the Haengmae Formation should be Upper Ordovician or later. This study revealed that the Haengmae Formation is neither shear zone, nor an upper part of the Jeongseon Limestone, and is also not the same age as the Jeongseon Limestone. Furthermore, it was confirmed that the Haengmae Formation should be considered a unit of lithostratigraphy in accordance with the stratigraphic guide of the International Commission on Stratigraphy (ICS).

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.405-412
• /
• 2008

This study was aimed to investigate whether an oxygen inhibition layer (OIL) is essential for the interfacial bonding between resin composite layers or not. A composite (Z-250, 3M ESPE) was filled in two layers using two aluminum plate molds with a hole of 3.7 mm diameter. The surface of first layer of cured composite was prepared by one of five methods as followings, thereafter second layer of composite was filled and cured: Group 1 - OIL is allowed to remain on the surface of cured composite; Group 2 - OIL was removed by rubbing with acetone-soaked cotton; Group 3 - formation of the OIL was inhibited using a Mylar strip; Group 4 - OIL was covered with glycerin and light-cured; Group 5 (control) - composite was bulk-filled in a layer. The interfacial shear bond strength between two layers was tested and the fracture modes were observed. To investigate the propagation of polymerization reaction from active area having a photo-initiator to inactive area without the initiator, a flowable composite (Aelite Flow) or an adhesive resin (Adhesive of ScotchBond Multipurpose) was placed over an experimental composite (Exp_Com) which does not include a photoinitiator and light-cured. After sectioning the specimen, the cured thickness of the Exp_Com was measured. The bond strength of group 2, 3 and 4 did not show statistically significant difference with group 1. Groups 3 and 4 were not statistically significant different with control group 5. The cured thicknesses of Exp_Com under the flowable resin and adhesive resin were 20.95 (0.90) urn and 42.13 (2.09), respectively.

• Journal of Animal Science and Technology
• /
• v.50 no.1
• /
• pp.69-78
• /
• 2008

A total of 360 Berkshire(hog) weighing 25kg were fed experimental diets containing either dehulled soybean meal(DSBM) or non-dehulled soybean meal(NDSBM) as a major protein source until they reach 80kg. The pigs were then fed the finisher diets either high(3,265 kcal/kg) or low(2,940 kcal/kg) in ME to evaluate the effects of dietary energy level for finisher phase on the growth performances, carcass and meat quality parameter. In growth performance, daily weight gain(kg/day) was higher(P<0.05) in T1 than in other groups. Feed conversion(feed/gain) was lower(P<0.05) in other groups. In carcass parameter, carcass percentage was higher(P<0.05) in T2 than in T1 and T4. Backfat thickness was lower(P<0.05) in T2 than in T1 and T3. The ratio of up B grade in carcass grade tender to be higher in T2 than in other groups. In meat quality, chemical composition was similar between groups. WHC was slighter higher in T1 than in other groups. Shear force was tender to be higher in T1 than in other groups. Hunter L and a in meat color were tender to be higher in T2 than in other groups. Hunter L in backfat color was thender to be higher in T1 than in other groups. The results indicate that growth performance and carcass parameter of Berkshire were improved by the dehulled soybean meal as comparison with non-dehulled soybean meal during growing and finishing periods.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.315-326
• /
• 2002

This study was conducted to examine the effects of Red clay(Hwangto) as feed additives with 26 Hanwoo steers at two regions for 540 days from six to 24 months of age on feed efficiency, meat quantity and meat quality. Feeding trial 1 was conducted with two treatment groups by five heads/treatment which were T1(Control) and T2(Control+ad libitum Hwangto) at National Livestock Research Institute. Feeding trial 2 was conducted with four treatment groups by four heads/treatment which were T1(Control), T2(Control+2% Hwangto), T3(Control+5% Hwangto) and T4(Control+ad libitum Hwangto) at a private Hanwoo breeding farm. In feeding trial 1, average daily gains by growing, fattening, finishing and over-all periods were 0.572, 0.866, 0.869 and 0.769kg in T1, and 0.537, 0.904, 0.857 and 0.766kg in T2, respectively. Average daily gain for growing and finishing period was high in T1 but in T2 for fattening period, which were not statistically significant. Also concentrates and TDN intakes per kg gains were not statistically significant by treatments. In carcass characteristic, dressed carcass and red meat percentage were high in T1 but in T2 for retailed cut percentage without significant difference. The yield index and shear force was 69 and 70, 4.4 and 6.1 kg/$cm^2$ in T1 and T2, respectively. In palatability traits, the panel test scores of juiciness, tenderness and flavor were 4.08 and 4.64, 3.42 and 3.96, 4.58 and 4.80 in T1 and T2, respectively. which showed a tendency to improvement in Hwangto feeding groups. In feeding trial 2, the range of average daily gains were 0.656(T6) to 0.772(T3), 0.937(T6) to 1.009(T5), 0.592(T3) to 0.675kg(T6) in growing, fattening and finishing period, respectively. Although it was high in T3, T5 and T6 at growing, fattening and finishing period, respectively, it was not significantly different by treatments. The ranges of concentrates and TDN intakes per kg gains were 8.71 to 9.50(average 9.05) and 7.52 to 7.64kg(average 7.55kg), they all were lower in Hwangto feeding groups than in control about 4.5 to 8.3% and 1.2 to 1.6%, respectively. In carcass characteristics, back-fat thickness, loin eye muscle area and yield index were not difference by treatments, but marbling scores were high in T5 and T6 than in percent. Summarizing above results, it may be concluded that the use of unprocessed Hwangto as feed additives for growing-fattening steers seems to improve meat quality but not red meat quantity and feed efficiency, and may be required to feed ad libitum during the finishing period.