• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.1-12
• /
• 1992

Generally, laser machines with high generated power can be developed by means of enhancing their mean power, since the enhancement of mean power exerts an influence on peripheral parameters and machining performance. In this research, we evaluate the various machining properties by the use of two machines which bear different mean power each other, so that we may study various effects of the enhancement of mean power. As a result, when the mean power comes to be enhanced to 75%, we obtain the increase of output energy up to 69% and of peak power more than 95%, and also obtain almost twice of the cutting speed. Moreover we find the fact that if the test pieces have enough thickness in contrast with output energy, the pulse frequency moves toward the frequency bandwidth which takes proportion to the cutting speed mas well as to the amount of material removal per unit time. In addition it is finally obtained that the laser machine with high output power yields small taper degrees at kerf parts, while it has large cutting widiths and dross lengths.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2013

This study newly presents a synthetic phase tuning technique to suppress the unwanted torsional mode while enhancing the desired torsional mode in a pipe. Specifically, we aim at the enhancement of the first torsional mode and the suppression of the undesired, second torsional mode. Earlier efforts were to enhance the desired wave mode only in the hope that the enhancement results in the suppression of the unwanted wave mode. Unlike these efforts, the suggested technique makes the complete cancellation of the unwanted wave mode but it is shown to enhance the desired first mode for torsional wave problems. In the present study, the synthetic phase tuning is developed for the cancellation of the unwanted wave mode, meaning that the number of necessary experimental equipments is reduced. Simulation and experiment were carried out to check the effectiveness of the proposed method. As an application of the suggested technique, we investigated the reflection and mode conversion characteristics of the first torsional mode according to the step thickness variation in a stepped pipe.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.245-248
• /
• 2011

Many researches have been carried out to improve light absorption in the crystalline silicon solar cell fabrication. The rear reflection is applied to increase the path length of light, resulting in the light absorption enhancement and thus the efficiency improvement mainly due to increase in short circuit current. In this paper, we manufactured the silicon solar cell using the mono crystalline silicon wafers with $156{\times}156mm^2$, 0.5~3.0 ${\Omega}{\cdot}cm$ of resistivity and p-type. After saw damage removal, the dielectric film ($SiN_x$)on the back surface was deposited, followed by surface texturing in the KOH solution. It resulted in single-side texturing wafer. Then the dielectric film was removed in the HF solution. The silicon wafers were doped with phosphorus by $POCl_3$ with the sheet resistance 50 ${\Omega}/{\Box}$ and then the silicon nitride was deposited on the front surface by the PECVD with 80nm thickness. The electrodes were formed by screen-printing with Ag and Al paste for front and back surface, respectively. The reflectance and transmittance for the single-sided and double-sided textured wafers were compared. The double-sided textured wafer showed higher reflectance and lower transmittance at the long wavelength region, compared to single-sided. The completed crystalline silicon solar cells with different back surface texture showed the conversion efficiency of 17.4% for the single sided and 17.3% for the double sided. The efficiency improvement with single-sided textured solar cell resulted from reflectance increase on back surface and light absorption enhancement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.77-80
• /
• 2008

Lap splices were located in the plastic hinge region of most bridge piers that were constructed before the adoption of the seismic design provision of Korea Highway Design Specification on 1992. This research aims at evaluating the seismic performance of reinforced concrete bridge piers with lap-spliced longitudinal steels, which were strengthened with prestressed steel jacket in the plastic hinge region. Quasi-static test was used to investigate the seismic performance enhancement of RC test specimens. Conventional method applied mortar grouting inside steel jacket, but this research did not apply mortar grouting inside steel plate. Four test specimens in an aspect of 3.5 were constructed with 400 mm in diameter and 1600 mm in height. Test parameters are the lap splice of longitudinal reinforcing steels and thickness of steel jacket.

• Journal of KIISE:Software and Applications
• /
• v.31 no.7
• /
• pp.911-921
• /
• 2004

Accurate minutiae extraction from input fingerprint images is one of the critical modules in robust automatic fingerprint identification system. However, the performance of a minutiae extraction is heavily dependent on the quality of the input fingerprint images. If the preprocessing is performed according to the fingerprint image characteristics in the image enhancement step, the system performance will be more robust. In this paper, we propose a knowledge-based preprocessing method, which extracts S features (the mean and variance of gray values, block directional difference, orientation change level, and ridge-valley thickness ratio) from the fingerprint images and analyzes image quality with Ward's clustering algorithm, and enhances the images with respect to oily/neutral/dry characteristics. Experimental results using NIST DB 4 and Inha University DB show that clustering algorithm distinguishes the image Quality characteristics well. In addition, the performance of the proposed method is assessed using quality index and block directional difference. The results indicate that the proposed method improves both the quality index and block directional difference.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.103-104
• /
• 2003

This experiment was conducted to investigate the effect of enhancement of protein, limit amino acid, Ca and P on egg Production and egg qualify in laying hens. 720 twenty five week of age (WOA) brown laying hen divided to two diet to seventy WOA. Conventional diet(control) formulated by NRC recommendation, 2,900 ME kcal/kg, 16.0 ％ crude protein, 0.768 ％ lysine, 0.332 ％ methionine, 3.5 ％ Ca and 0.275 available P. Enhanced diet(ED) formulated by increasing about ten percentage except ME and available P : 2,900 ME kcal/kg, 17.7 ％ crude protein, 0.845 ％ lysine, 0.368 ％ methionine, 3.99 ％ Ca and 0.275 available P. Overall egg Production were not difference by diets though the hens fed control diet tended to higher egg Production to sixty WOA. Average egg weight was heavier in the ED than control in all period(P＜0.05). Daily egg mass increased slightly in the ED, but there were not significantly difference. Average feed intake increased about 3g in the control compared to the ED. Feed conversion ratio significantly improved in the ED(P＜0.05). Egg shell breaking strength was stronger in ED by around sixty WOA and showed similar tendency after that. Egg shell thickness was certainly improved in ED. Haugh unit. egg shell color and egg yolk color were not difference by diets.

• Tribology and Lubricants
• /
• v.35 no.3
• /
• pp.176-182
• /
• 2019

The primary objective of this study is to treat a monocrystalline silicon (Si) wafer having a thickness of $279{\mu}m$ by employing the ultrasonic nanocrystal surface modification (UNSM) technology for improving the efficiency and service life of nano-electromechanical systems (NEMSs) and micro-electromechanical systems (MEMSs) by enhancing of wear and corrosion resistances. The wear and corrosion resistances of the Si wafer were systematically investigated before and after UNSM treatment, wherein abrasive, oxidative and spalling wear mechanisms were applied to the as-received and subsequently UNSM-treated Si wafer. Compared to the asreceived state, the wear and corrosion resistances of the UNSM-treated Si wafer are found to be enhanced by about 23% and 14%, respectively. The enhancement in wear and corrosion resistances after UNSM treatment may be attributed to grain size refinement (confirmed by Raman spectroscopy) and modified surface integrity. Furthermore, it is observed that the Raman intensity reduced significantly after UNSM treatment, whereas neither the Raman shift nor new phases were found on the surface of the UNSM-treated Si wafer. In addition, the friction coefficient values of the as-received and UNSM-treated Si wafers are found to be about 0.54 and 0.39, respectively. Hence, UNSM technology can be effectively incorporated as an alternative mechanical surface treatment for NEMSs and MEMSs comprising Si wafers.

• Advances in nano research
• /
• v.13 no.2
• /
• pp.199-206
• /
• 2022

We present the high-brightness large-area 10.1" in-cell polarizer display panel integrated with a wire grid polarizer (WGP) and metal reflector, from the initial design to final system development in a commercially feasible level. We have modeled and developed the WGP architecture integrated with the metal reflector in a single in-cell layer, to achieve excellent polarization efficiency as well as brightness enhancement through the light recycling effect. After the optimization of key experimental parameters via Taguchi method, the roll nanoimprint lithography employing a flexible large-area tiled mold has been utilized to create the 90 nm-pitch polymer resist pattern with the 54.1 nm linewidth and 5.1 nm residual layer thickness. The 90 nm-pitch Al gratings with the 51.4 nm linewidth and 2150 Å height have been successfully fabricated after subsequent etch process, providing the in-cell WGPs with high optical performance in the entire visible light regime. Finally we have integrated the WGP in a commercial 10.1" display device and demonstrated its actual operation, exhibiting 1.24 times enhancement of brightness compared to a conventional film polarizer-based one, with the contrast ratio of 1,004:1. Polarization efficiency and transmittance of the developed WGPs in an in-cell polarizer panel achieve 99.995 % and 42.3 %, respectively.

• Journal of Fashion Business
• /
• v.26 no.5
• /
• pp.1-21
• /
• 2022

Purpose of this study is to develop fashion design with greater added value and to seek the expandability of its expression domain by applying special computer code and tape embroidery machine capable of creating more special and fancier fashion to the development of fashion design by focusing on the fashion decorations that are becoming increasingly more computer systematized. For this purpose, expression techniques and effects of computer embroidery machine code and tape trimming decoration techniques, and cases of modern fashion design are examined. Major images are then deduced to designing and production of actual 6 creative pieces equipped with creativity and commercial value by applying such images deduced. As the results, it is not only possible to develop highly value added fashion design by utilizing mixed computer embroidery machine code and tape trimming decoration technique but also to produce countlessly new and unique surfaces by inducing changes in diversified pattern expressions, thickness of cord thread, and width, color and texture of material, etc. of the tape. This can maximize the expression domain of design, and fulfill the fashion desires of consumers wanting modern enhancement of quality and individualization. If multilateral attempts and studies for the aforementioned purposes can be expanded continuously, it is deemed possible to broaden the range of expression techniques in fashion design and, moreover, to make contribution towards enhancement of competitiveness of fashion industry.

• Korean Journal of Radiology
• /
• v.22 no.1
• /
• pp.63-71
• /
• 2021

Objective: To identify the CT findings associated with treatment failure after antibiotic therapy for acute appendicitis. Materials and Methods: Altogether, 198 patients who received antibiotic therapy for appendicitis were identified by searching the hospital's surgery database. Selection criteria for antibiotic therapy were uncomplicated appendicitis with an appendiceal diameter equal to or less than 11 mm. The 86 patients included in the study were divided into a treatment success group and a treatment failure group. Treatment failure was defined as a resistance to antibiotic therapy or recurrent appendicitis during a 1-year follow-up period. Two radiologists independently evaluated the following CT findings: appendix-location, involved extent, maximal diameter, thickness, wall enhancement, focal wall defect, periappendiceal fat infiltration, and so on. For the quantitative analysis, two readers independently measured the CT values at the least attenuated wall of the appendix by drawing a round region of interest on the enhanced CT (HU_post) and non-enhanced CT (HU_pre). The degree of appendiceal wall enhancement (HU_sub) was calculated as the subtracted value between HU_post and HU_pre. A logistic regression analysis was used to identify the CT findings associated with treatment failure. Results: Sixty-four of 86 (74.4%) patients were successfully treated with antibiotic therapy, with treatment failure occurring in the remaining 22 (25.5%). The treatment failure group showed a higher frequency of hypoenhancement of the appendiceal wall than the success group (31.8% vs. 7.8%; p = 0.005). Upon quantitative analysis, both HU_post (46.7 ± 21.3 HU vs. 58.9 ± 22.0 HU; p = 0.027) and HU_sub (26.9 ± 17.3 HU vs. 35.4 ± 16.6 HU; p = 0.042) values were significantly lower in the treatment failure group than in the success group. Conclusion: Hypoenhancement of the appendiceal wall was significantly associated with treatment failure after antibiotic therapy for acute appendicitis.