• 한국표면공학회지
• /
• 제49권6호
• /
• pp.604-611
• /
• 2016

In order to comply with demand for high efficient gas turbines operating at higher temperatures, considerable amounts of research efforts have been performed with searching for the next-generation thermal barrier coatings (TBCs) with respect to coating materials as well as processing methods. In this study, thermal barrier coatings in the $(La_{1-x}Gd_x)_2Zr_2O_7$ system, which is one of the most versatile materials replacing yttria-stabilized zirconia (YSZ), are fabricated by suspension plasma spray with suspension made of synthesized powders via solidstate reaction. Dense, $100{\sim}400{\mu}m$ thick coatings of fluorite-phase zirconate with moderate amount of segmented microstructures are obtained by using suspension plasma spray. Phase formation and thermal diffusivity are characterized with coating compositions. The feasibility of $(La_{1-x}Gd_x)_2Zr_2O_7$ coatings for TBC applications is also discussed.

• 한국전기전자재료학회논문지
• /
• 제27권8호
• /
• pp.516-521
• /
• 2014

An excellent hydrophobic surface has a high contact angle over 147 degree and the contact angle hysteresis below $5^0$ was produced by using roughness combined with hydrophobic PTFE coatings, which were also confirmed to exhibit an extreme adhesion to glass substrate. To form the rough surface, the glass was etched by Ar-plasma. A very thin PTFE film was coated on the plasma etched glass surface. Roughness factors before or after PTFE coating on the plasma etched glass surface, based on Wensel's model were calculated, which agrees well with the dependence of the contact angle on the roughness factor is predicted by Wensel's model. The PTFE films deposited on glass by using a conventional rf-magnetron sputtering. The glass substrates were etched Ar-plasma prior to the deposition of PTFE. Their hydrophobicities are investigated for application as a anti-fouling coating layer on the screen of displays. It is found that the hydrophobicity of PTFE films mainly depends on the sputtering conditions, such as rf-power, Ar gas content introduced during deposition. These conditions are closely related to the deposition rate or thickness of PTFE film. Thus, it is also found that the deposition rate or the film thickness affects sensitively the geometrical morphology formed on surface of the rf-sputtered PTFE films. In particular, 1,950-nm-thick PTFE films deposited for 30 minute by rf-power 50 watt under Ar gas content of 20 sccm shows a very excellent optical transmittance and a good anti-fouling property and a good durability.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.339-344
• /
• 2017

Highly corrosion resistance performance of CrAlSiN coatings were obtained by applying ultrathin $Al_2O_3$ thin films using atomic layer deposition (ALD) method. CrAlSiN coatings were prepared on Cr adhesion layer/SUS304 substrates by a hybrid coating system of arc ion plating and high power impulse magnetron sputtering (HiPIMS) method. And, ultrathin $Al_2O_3$ passivation layer was deposited on the CrAlSiN/Cr adhesion layer/SUS304 sample to protect CrAlSiN coatings by encapsulating the whole surface defects of coating using ALD. Here, the high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy dispersive X-ray spectrometry (EDX) analysis revealed that the ALD $Al_2O_3$ thin films uniformly covered the inner and outer surface of CrAlSiN coatings. Also, the potentiodynamic and potentiostatic polarization test revealed that the corrosion protection properties of CrAlSiN coatings/Cr/SUS304 sample was greatly improved by ALD encapsulation with 50 nm-thick $Al_2O_3$ thin films, which implies that ALD-$Al_2O_3$ passivation layer can be used as an effect barrier layer of corrosion.

• 동의생리병리학회지
• /
• 제20권5호
• /
• pp.1089-1101
• /
• 2006

Following conclusions are drawn from study about Yukmigiwhangwon through referring to literatures and reviewing in the point of Hyungsang medicine. Yukmigiwhangwon was prescribed by Jeon Eul in order to cure five kinds of flaccidity of infants, but after since then it has been basically applied to symptoms which was caused by deficiency of the kidney not only infants but also adult. The deficiency of kidney is the lack of vital essence and body fluid stored in kidney, it happens because infants are born in the conditions of lack of receiving in the womb. And it happens because adults infringe the rules of life, especially the sexual life. Main symptoms of the poverty of renal functions are emptiness of the brain marrow, dizziness, forgetfulness, tinnitus, deafness, vertigo and dim eyesight, insomnia, the low back and knees aching and limping, heat on the legs, tibia aching, nocturnal emission, dry mouth, reddened tongue and little coating or non coating of the 'tongue, weak blood meridians. the treating method is nourishing Eum and supplementing kidney. In Dongeuibogam Yukmigiwhangwon is mentioned in the parts of vital essence, blood, voice, kidney, urine, eye, ear, the low back, hair, fire, exhaustion syndrome, cough, polydipsia, infant, etc. The shapes which Yukmigiwhangwon is applied to are the Dam Body Doing deficiency of Eum due to excess of Yang, man, infant, Jung type, Fish group, reverse triangular shape, big headed man, big eared man, big mouthed man, man having prominent cheekbones, man having long waist, man having big hips, man with thick hair or white hair, man with bald on the head, etc. In color it is applied to darkish complexion, flushed tip of the nose, or flushed cheek bones. Through inquiring into the clinical cases on the points of Hyungsang medicine Yukmigiwhangwon is efficacious cure to lumbago, symptoms of tendons and bones, symptoms of eyes and ears, symptoms of respiratory organs, dermatopathia, headache, polydipsia, urinary disorders, etc.

• 한국화재소방학회논문지
• /
• 제32권3호
• /
• pp.14-18
• /
• 2018

건축 재료로 사용되는 목재의 내화성능에 관한 기존 연구들은 목재에 난연 또는 방염 처리하였을 경우 연소특성을 확인하는 것에 집중되어 졌다. 본 논문에서는 화염에 노출된 목재의 열분해와 밀접한 관련이 있는 내부 온도 변화를 확인하기 위하여 건축용 구조재로 널리 사용되는 미송(Douglas-fir)에 방염액 및 방염도료를 처리 후 표준 가열 온도 곡선에 따라 수평가열로에서 가열실험을 실시하였다. 실험결과 방염액을 처리하였을 때 목재내부의 열확산이 현저히 감소하는 것을 확인할 수 있었으며 방염도료를 처리한 시료의 경우 고온에 노출 되었을 때 도막이 박리되어 방염효과를 기대할 수 없었다. 따라서 두꺼운 목재에 방염효과를 높이기 위해서는 목재표면에 도막을 형성시키는 방염도료보다는 목재내부로 침투하는 방염액을 사용하는 것이 방화효과가 클 것으로 판단된다.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.316-322
• /
• 2014

With increase in demand for higher operating temperatures of gas turbines, extensive research efforts have been carried out to enhance the performance of thermal barrier coatings (TBCs) in the field of coating processing as well as materials. In this study, thermal barrier coatings in lanthanum/gadolinium zirconate system, which is one of the most promising candidates for replacing yttira-stabilized zirconia (YSZ) in thermal barrier coating applications, are fabricated via suspension plasma spray. Dense, $300{\sim}400{\mu}m$ thick coatings of fluoritephase zirconate with modest amount of segmented microstructures are obtained by using suspension plasma spray with suspensions of planetary-milled mixture between lanthanum and/or gadolinium oxide and nano zirconia. These coatings exhibit thermal conductivities of 1.6 ~ 1.7 W/mK at $1000^{\circ}C$, which is relatively lower than that of YSZ.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.87-93
• /
• 2019

This work aims to develop a dry lubricant for oilless bush, especially a solid lubricant, thereby creating a coating method with improved properties of anti-friction and load-carrying capacity without oil lubrication. In this work, spherical-shaped powders of thermosetting resin such as polyimide (PI) are mixed with a binder matrix obtained by mixing a fluorocarbon compound resin such as Polytetrafluoroethylene (PTFE) or Ethylene tetra fluoro ethylene (ETFE) with itself or with a non-fluorocarbon thermoplastic resin such as Polyether ether ketone (PEEK). And these dry lubricant mixtures are thickly coated (200-300 mm in the thickness) on the inner surface of the bush by using a wet-typed air-spray deposition method. It was found that the load-carrying capacity of the solid lubricant for excavator bush (60 mm in diameter) that operates under a high load condition (at 40 MPa) is greatly improved owing to the spherical-shaped powders of thermosetting resin. In addition, the coefficient of friction at the sliding surface is also reduced less than 0.1. Thick coating also lowers the contact stress at the edge of a bush that results in better tribological performances. The result suggests that the lubrication performance and durability life of the bush can be remarkably improved even without lubrication (oil or grease).

• 한국항행학회논문지
• /
• 제27권1호
• /
• pp.71-76
• /
• 2023

본 논문에서는 마이크로스트립 패치 안테나와 폴리비닐알코올(PVA; polyvinyl alcohol)을 이용한 습도 센서에 대하여 연구하였다. PVA는 습도에 따라 유전율이 변하는 고분자 물질이며, 전계 변화에 민감한 마이크로스트립 패치 안테나의 방사면에 직사각형 슬롯을 추가하여 비유전율 변화에 대한 감도를 높였다. 0.76 mm 두께의 RF-35 기판에 제작된 안테나의 직사각형 슬롯이 추가된 방사면 주변을 PVA로 얇게 코팅한 후, 온습도 챔버를 사용하여 25도에서 상대습도를 40%에서 80%까지 10% 간격으로 증가시켜 안테나 입력 반사 계수의 공진 주파수와 크기의 변화를 측정하였다. 실험 결과, 상대습도가 40%에서 80%로 증가할 때 안테나 입력 반사 계수의 공진 주파수는 2.447 GHz에서 2.418 GHz로 감소하였고, 입력 반사 계수의 크기는 -7.112 dB에서 -3.428 dB로 증가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.25-26
• /
• 2021

Due to COVID-19, the spread of non-face-to-face culture is increasing the time spent indoors. Accordingly, it is necessary to reduce indoor air pollutants. Also, among building materials, there are paints. As the number of coatings increases, the coating film becomes thick, and there is a risk of cracking and falling off. Therefore, this study is to examine the adsorption properties of indoor air pollutants according to the number of coatings of a paint mixed with powdered activated carbon. In the experimental plan, the addition ratio of powdered activated carbon was selected as 30%, and the number of coatings was selected as primcoating, second coat, and finishing coat, and the concentration of formaldehyde and volatile organic compounds were measured. As a result, as the number of coatings increased, the concentration of formaldehyde and volatile organic compounds tended to decrease. This is considered to be due to the fact that not only the physical adsorption acted by the internal pores of the powdered activated carbon, but also because a lot of powdered activated carbon was present on the painted surface as the coating film was formed. However, since it is judged that there is an error in the concentration due to the inflow of external air as the chamber cover is opened to put the test object in the adsorption test process, it is considered that the experimental method needs to be supplemented.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.475-481
• /
• 2023

Recently, the electron transport layer (ETL) has become one of the key components for high-performance perovskite solar cell (PSC). This study is motivated by the nonreproducible performance of ETL made of spin coated SnO₂ applied to a PSC. We made a comparative study between tin oxide deposited by atomic layer deposition (ALD) or spin coating to be used as an ETL in N-I-P PSC. 15 nm-thick Tin oxide thin films were deposited by ALD using tetrakisdimethylanmiotin (TDMASn) and using reactant ozone at 120 ℃. PSC using ALD SnO₂ as ETL showed a maximum efficiency of 18.97 %, and PSC using spin coated SnO₂ showed a maximum efficiency of 18.46 %. This is because the short circuit current (Jsc) of PSC using the ALD SnO₂ layer was 0.75 mA/cm² higher than that of the spin coated SnO₂. This result can be attributed to the fact that the electron transfer distance from the perovskite is constant due to the thickness uniformity of ALD SnO₂. Therefore ALD SnO₂ is a candidate as a ETL for use in PSC vacuum deposition.