• 제목/요약/키워드: thermistor

검색결과 220건 처리시간 0.026초

과전류 및 단락사고 방지용 전기안전 제어장치에 관한 연구 (A Study on Electric Safety Control Device for Prevention of Over Current and Short Circuit Faults)

  • 조시환;곽동걸;정도영;심재선;김정숙
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.2100-2101
    • /
    • 2008
  • This paper is studied on a protective control system for electrical fire and electrical faults due to over current or electric short circuit faults by using electrical thermal characteristics of PTC (Positive Temperature Coefficient) thermistor and current response characteristics of high sensitive reed switch. The PTC thermistor has characteristic of positive resistivity temperature coefficient according to the temperature variation, which is construction of a regular square and cube demarcation with BaTiO3_Ceramics of positive temperature coefficient. Also PTC thermistor shows the phenomenon which is rapidly increased in the resistivity if the temperature is increased over Curie temperature point, and reed switch, which is used for electrical fault current sensing devices, have a excellent characteristic of response velocity in degree of ${\mu}s{\sim}ms$ that sensing magnetic flux in proportion to dimension of line current. This paper is proposed on a protective control system use PTC thermistor and reed switch for sensor which is protected from electrical fire due to overload faults or electric short circuit faults. Some experimental results of the proposed electric safety control device are confirmed to the validity of the analytical results.

  • PDF

PTC 써어미스터를 이용한 유속센서의 특성 (Characteristics of Flow Sensor Using PTC Thermistor)

  • 권혁주;이용현
    • 센서학회지
    • /
    • 제3권3호
    • /
    • pp.3-8
    • /
    • 1994
  • 정온발열 특성을 갖는 PTC 써어미스터를 사용하여 유속센서를 제조하였다. $(Ba_{0.7}Sr_{0.3})TiO_{3}$ 분말을 사용하여 PTC 써어미스터를 제조한 후, 유속에 따른 저항률의 변화를 조사하였다. 유속이 0 cm/s에서 5 cm/s로 변할 경우 저항률은 4.45 $k{\Omega}{\cdot}cm$에서 3.95 $k{\Omega}{\cdot}cm$로 변하였다. 유속이 1 cm/s와 5 cm/s일 경우 PTC 써어미스터의 감도는 -204 (${\Omega}{\cdot}cm$)/(cm/s)와 -24 (${\Omega}{\cdot}cm$)/(cm/s)로 나타났다.

  • PDF

돌입전류 제한용 $Mn_3$$O_4$-NiO-CuO-$Co_3$$O_4$-ZnO계 NTC 써미스터에서 ZnO/$Mn_3$$O_4$비에 따른 전기적 특성 (Electrical Properties as the ratio of ZnO/$Mn_3$$O_4$ of NTC Thermistor with $Mn_3$$O_4$-NiO-CuO-$Co_3$$O_4$-ZnO system for Inrush Current Limited)

  • 윤중락;김지균;권정렬;이현용;이석원
    • 한국전기전자재료학회논문지
    • /
    • 제13권6호
    • /
    • pp.472-477
    • /
    • 2000
  • Oxides of the form Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO present properties that make them useful as power NTC thermistor for current limited. Electrical properties of Mn$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO power NTC thermistor such as I-V characteristics tim constant activation energy and heat dissipation coefficient measured as a function of temperature and composition. In Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO system with the 5wt% addition of Co$_{3}$/O$_{4}$ it can be seen that resistivity and B-constant were increased as the ratio of ZnO/Mn$_{3}$/O$_{4}$ was increased. Heat dissipation constant, I-V characteristics and time constant showed similar behaviour compared with those of conventional thermistors. In particular resistance change ratio ($\Delta$R) the important factor for reliability varied within $\pm$5% indicating the compositions of these products could be available for power thermistor.

  • PDF

PTC 서미스터를 이용한 소형 고속응성의 전기화재 방재시스템 개발 (Development on Electrical Fire Prevention System of Small Size and High Speed by using PTC Thermistor)

  • 곽동걸
    • 마이크로전자및패키징학회지
    • /
    • 제15권1호
    • /
    • pp.51-58
    • /
    • 2008
  • 본 논문에서는 PTC 서미스터의 전기적 온도특성을 이용하여 각종 전기화재 및 전기사고를 예방 보호하는 방재시스템에 대해 연구하였다. PTC(Positive Temperature Coefficient) 서미스터는 온도변화에 따른 저항특성이 정 (+)온도계수를 갖는 특징이 있다. PTC서미스터는 정온도계수를 갖는 $BaTiO_3$계 세라믹스의 정방정계-입방정계 구조를 가지고 상변이점인 큐리(Curie)온도 이상으로 온도가 증가하면 저항이 급격히 증가하는 현상을 보인다. 본 논문에서는 이러한 정저항 온도특성과 자체 발열특성을 갖는 PTC 서미스터를 전기단락사고나 과부하사고 등 전기사고의 감지센서로 이용하여 전기화재사고를 예방하는 제어시스템에 대해 제안하였다. 그 결과 기존에 상용되는 차단기들의 빈번한 오동작과 저 신뢰성, 저속응성 등으로 발생되는 전기화재 및 전기재해의 문제점들을 해결하였다. 또한 제안한 방재시스템의 다양한 실험결과를 통해 이론적 해석의 타당성을 입증하였다.

  • PDF

마이크로 프로세서 기반 Lock-In-Amp를 이용한 텍스타일 직물전극의 체온 측정에 관한 연구 (A Study on Body Temperature Measurement of Woven Textile Electrode Using Lock-In-Amp based on Microprocessor)

  • 이강휘;이성수;이정환;송하영
    • 전기학회논문지
    • /
    • 제66권7호
    • /
    • pp.1141-1148
    • /
    • 2017
  • Generally, a thermistor made by sintering a metal oxide is widely used to measure the ambient temperature. This thermistor is widely used not only for industrial use but also for medical use because of its excellent sensitivity, durability, temperature change characteristics and low cost. In particular, the normal body temperature is 36.9 degrees relative to the armpit temperature, and it is most closely related to the circulating blood flow. Previous studies have shown that body temperature changes during biomechanical changes and body temperature changes by anomalous signs or illnesses. Therefore, in this study, we propose a Lock-In-Amp design to detect minute temperature changes of clothing and thermistor wired by a preacher as a method to regularly measure body temperature in daily life. Especially, it is designed to measure the minute resistance change of the thermistor according to body temperature change even in a low-cost microprocessor environment by using a micro-processor-based Lock-In-Amp, and a jacquard and the thermistor is arranged so as to be close to the side, so that the reference body temperature can be easily measured. The temperature was measured and stored in real time using short-range wireless communication for non - restraint temperature monitoring. A baby vest was made to verify its performance through temperature experiments for infants. The measurement of infant body temperature through the existing skin sensor or thermometer has limitations in monitoring infant body temperature for a long time without restriction. However, it can be overcome by using the embroidery fabric based micro temperature monitoring wireless monitoring device proposed in this study.

서미스터용 Mn-Co-Ni-Fe계 산화물의 조성에 따른 전기저항특성 (Characteristics of Electrical Resistance in System Mn-Co-Ni-Fe oxide for Thermistor with various Compositions)

  • 김영민;임재석;임굉
    • 공학논문집
    • /
    • 제5권1호
    • /
    • pp.63-72
    • /
    • 2004
  • Mn-Co-Ni 3성분계에 Fe의 첨가량을 변화시켜 따른 산화물 서미스터소결체(Mn-Co-Ni-Fe oxide)를 소성온도 1200~$1400^{\circ}C$에서 제조하여 전기저항특성을 조사한 결과, 결정상은 단일입방정 스피넬형 결정구조였고, 소성온도에 따른 전기전도도는 $1300^{\circ}C$에서 4시간 소결한 시미스터가 가장 높았다. 대체로 F-2를 제외하고는 Fe의 첨가량이 증가할 때 비저항은 증가하고 상대적으로 전기전도도는 감소한다. 특히 F-2의 조성에 있어서는 전기전도도가 1.4${\times}$$10^-3$${\ textohm}cm로 높았고 상대적으로 B정수는 2906K로 낮았다.

  • PDF

전류제한용 NTC 써미스타의 전기적 특성 (Electric Properties of NTC Thermistor for Current Limited)

  • 윤중락;김지균;이헌용;이석원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 D
    • /
    • pp.1674-1676
    • /
    • 1999
  • Oxide of the form $Mn_3O_4-CuO-Co_3O_4$-NiO-ZnO present properties that make them useful as power NTC thermistor for current limited. Power NTC thermistor electric properties of $Mn_3O_4-CuO-Co_3O_4$-NiO-ZnO system has been measured as a function of temperature and composition and current - voltage, time constant, activation energy, heat dissipation coefficient have also been determined.

  • PDF

Mn-Ni-Co계 NTC thermistor를 이용한 연료 부족 감지용 센서 (A Fuel shortage detected sensor using NTC thermistor of Mn-Ni-Co system)

  • 윤중락;김두영;송광호;이헌용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1995년도 추계학술대회 논문집
    • /
    • pp.347-350
    • /
    • 1995
  • In this paper, we fabricated fuel shortage detecting sensor, utilizing NTC thermistor concerned with Mn-Ni-Co system. We would be obtained B constant value of 1930∼2080 and resistivity 387∼430(ohm-cm) additive Bi$_2$O$_3$0∼0.5 wt% to Mn$_3$O$_4$:9wt%, Co$_3$O$_4$:61wt%, NiO:28wt% under 1150∼1250$^{\circ}C$ of sintering temperature. In sensor, we obtained characteristics, which we want, in resistance range 850∼l150$\Omega$, B constant 2000${\pm}$5%. we can see 15 multiplied differences between gasoline and heat dissipation coefficient of air condition.

  • PDF

환경 및 신뢰성 시험분야를 위한 숙련도시험 시료개발 연구 (A Study on Proficiency Test Sample Development for Environmental & Reliability Testing Field)

  • 박경환;이철규
    • 품질경영학회지
    • /
    • 제45권3호
    • /
    • pp.447-462
    • /
    • 2017
  • Purpose: This study aims to develop distributable samples that can be used for proficiency testing to verify the ability of the testing laboratory to perform high temperature and low temperature tests. Method: In this study, the temperature-resistance characteristics of the NTC thermistor were used to develop samples. The homogeneity and stability of samples were examined according to the proficiency testing requirements. Results: Thirty samples with homogeneity and stability were developed and used for the proficiency testing. Thus, it was possible to distinguish between the test laboratories that showed satisfactory results and those that did not. Conclusion: It was the first time to develop samples that can be used for proficiency testing in high temperature and low temperature tests. and it was proved that the proficiency test program can be operated using the characteristics of NTC thermistor.

세라믹 PTC 서미스터의 입계 장벽과 자기제어 정온발열 기능의 상관성 (Correlation between Grain-boundary Barrier-height and Self-controlled Fixed-temperature Heat-generation Function of Ceramic PTC Thermistor)

  • 소대화;임병재
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.240-241
    • /
    • 2005
  • 비 직선적 정(+) 저항온도계수 특성을 갖는 PTC thermistor는 전이온도(큐리점) 부근에서 온도변화에 대하여 극히 큰 저항 값의 변화를 나타내는 산화물계반도체 저항기(또는 발열체)로써, 일반적으로 반도체의 온도-저항 특성과 같이 상온영역에서 온도의 상승과 함께 부성저항 특성을 나타내다가 온도가 점점 증가하여 큐리점 부근에 도달하면 저항이 급격히 증가하는 독특한 특성을 갖는다. Perovskite 구조의 $BaTiO_3$를 주성분으로 미량의 Dopant를 첨가하여 도전성을 갖게 한 N형 반도체의 일종으로 저항-온도 특성 전류-전압 특성, 전류감쇄 특성 등을 이용하여 과전류 보호회로, 히터, TV 소자회로(degausser), 모터기동회로, 온도센서, 정온발열기기 등으로 널리 사용된다. 본 연구는 큐리점 부근의 급격한 저항변화 현상과 결정입계의 전위장벽 형성 및 그에 따른 정온발열 기능의 상관성으로부터 그 응용성을 조사하였다.

  • PDF