• 자원환경지질
• /
• 제55권1호
• /
• pp.1-17
• /
• 2022

암반의 역학적 및 열적 특성은 고준위방사성폐기물(high-level radioactive waste; HLW) 심지층 처분시스템 내 방사성 물질의 격리 및 이동 지연 능력과 관련된 성능에 영향을 미칠 수 있다. 이 연구는 HLW 처분시설 부지의 암반역학적 및 열적 특성과 관련된 부지설명모델에 필수적인 항목을 고찰하고 스웨덴과 핀란드의 선행 부지설명모델 사례를 통한 기술적 배경을 논의하였다. 스웨덴 SKB (Swedish Nuclear and Fuel Management Company)와 핀란드 Posiva는 암반역학적 및 열적 특성 조사·평가에 필수적인 항목을 제시하고 부지의 안전성 분석과 처분시설의 건설을 위한 암반역학 부지설명모델을 도출하였다. 암반역학 부지설명모델은 처분시설 부지 내 응력 분포와 더불어 신선암, 절리, 절리성 암반에 대한 강도 및 변형특성과 대규모 변형대의 기하학적 구조, 소규모 불연속면의 연결망 구조 및 암석의 열적 특성에 대한 조사·평가 결과를 포함한다. 또한, 암반역학 부지설명모델은 입력변수에 대한 민감도 분석결과와 입력변수의 불확실성에 대한 평가 결과를 제시하여야 한다.

• 한국지반환경공학회 논문집
• /
• 제10권2호
• /
• pp.5-12
• /
• 2009

남극 세종기지 및 시베리아의 블라디보스톡에서 채취한 흙 시료에 대하여 지반공학적인 기본 시험 즉, 비중시험, 다짐시험, 입도시험, 온도변화에 따른 열전도율시험, 부동수분시험, 일축압축강도시험을 수행하였다. 또한 블라디보스톡시료에 대해 온도변화별 인장강도시험을 수행하였다. 일축압축강도시험과 인장강도 시험시 시료의 동결에 의한 부피의 팽창을 억제하면서 공시체를 만들어 온도 변화 및 함수비 변화에 따른 강도변화를 비교하였다. 열전도율 시험 결과 영하 상태에서 흙의 열전도율은 영상 상태에서의 그것보다 훨씬 높게 나타났다. 온도변화에 따른 부동수분시험 결과 부동수분은 $0{\sim}-5^{\circ}C$ 사이에서 급격히 감소하였으며, $-20^{\circ}C$까지도 부동수분이 존재하였다. 압축강도시험 결과 함수비 변화에 따라서 다양한 응력-변형률 곡선을 보였으며, 남극의 사질동결토는 동일 온도의 얼음보다 훨씬 큰 강도를 보였으나, 블라디보스톡의 점성동결토는 초기 영하상태에서는 얼음 보다 작은 강도를 보이다가 $-15^{\circ}C$ 이하에서 서서히 얼음 보다 큰 강도를 나타내기 시작하였다. 또한 온도저하에 따라 인장강도가 증가하였다.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.54-60
• /
• 2006

Fitting process carried out in automobile transmission assembly line is classified into three classes; heat fitting, press fitting, and their combined fitting. Heat fitting is a method that heats gear to a suitable range under the tempering temperature and squeezes it toward the outer diameter of shaft. Its stress depends on the yield strength of gear. Press fitting is a method that generally squeezes gear toward that of shaft at room temperature by press. Another method heats warmly gear and safely squeezes it toward that of shaft. Warm shrink fitting process for automobile transmission part is now gradually increased, but the parts (shaft/gear) assembled by this process produced dimensional changes of gear profile in both radial and circumferential directions. So that it may cause noise and vibration between gears. In order to solve these problems, we need an analysis of warm shrink fitting process, in which design parameters are involved; contact pressure according to fitting interference between outer diameter of shaft and inner diameter of gear, fitting temperature, and profile tolerance of gear. In this study, an closed form equation to predict contact pressure and fitting load was proposed in order to develop optimization technique of warm shrink fitting process and verified its reliability through the experimental results measured in the field and FEM, that is, thermal-structural coupled field analysis. Actual loads measured in the field have a good agreement with the results obtained by theoretical and finite element analysis and also the expanded amounts of the gear profile in both radial and circumferential directions are within the limit tolerances used in the field.

• Steel and Composite Structures
• /
• 제10권3호
• /
• pp.207-222
• /
• 2010

Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second-order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.

• Transactions on Electrical and Electronic Materials
• /
• 제12권1호
• /
• pp.28-31
• /
• 2011

Transformation behavior and shape memory characteristics of Ti-(45-x)Ni-5Cu-xCr (x=0.5-2.0) alloys have been investigated by means of electrical resistivity measurements, differential scanning calorimetry, X-ray diffraction and thermal cycling tests under constant load. Two-stage B2-B19-B19' transformation occurred in Ti-(45-x)Ni-5Cu-xCr alloys. The B2-B19 transformation was separated clearly from the B19-B19' transformation in Ti-44.0Ni-5Cu-1.0Cr and Ti-43.5Ni-5Cu-1.5Cr alloys. A temperature range where the B19 martensite exists was expanded with increasing Cr content because decreasing rate of Ms (85 K / % Cr) was larger than that of Ms' (17 K / % Cr). Ti-(45-x)Ni-5Cu-xCr alloys were deformed in plastic manner with a fracture strain of 68% ~ 43% depending on Cr content. Substitution of Cr for Ni improves the critical stress for slip deformation in a Ti-45Ni-5Cu alloy due to solid solution hardening.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.113-116
• /
• 2004

The materials showing high structure dispersion with functional properties were developed on the quartz base and those were obtained by mechano-chemical reaction technology. Depending on the processing conditions and subsequent applications the materials produced by mechano-chemical reaction show concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segnetomagnetics, containing a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds were synthesized having thickness up to 10~50 nm showing magnetic, electrical properties and others. The similarity of the structure of surface layers of quartz particles subjected to mechano-chemical processing and nano-structure cluspol (clusters in a polymer matrics) material was also confirmed by the fact that the characteristics of ferromagnetic quartz of insulating nano-composite powder were changed with time, after its preparing process was completed. The magnetic permeability of the sample was decreasing within first two months down by 15~20 %. Then, the magnetic characteristics were almost stabilized steadily and continuously. The observed changes were related with defective structure of the particles, elastic stress relief, and changes of electron density and magnetic moment in deformation zones. This process of stabilization of the investigated properties could be intensified by the thermal annealing heat treatment in short time period of the nano-composite quartz powders at the temperature ranges of 100~15$0^{\circ}C$.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1997년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.7-7
• /
• 1997

During sintering of very porous green bodies, as obtained by compaction of hard powders - such as tungsten carbide or ceramics - or by injection moulding, important shrinkage occurs. Due to heterogeneous green density field, gravity effects, friction on the support, thermal gradients, etc., this shrinkage is often non-uniform, which' may induce significant shape changes. As the ratio of compact dimension to powder size is very high, the mechanics of continuum is relevant to model such phenomena. Thus numerical techniques, such as the finite element method can be used to simulate the sintering process and predict the final shape of the sintered part. Such type of simulation has much been developed in the last decade firstly for hot isostatic pressing and next for die compaction. Finite element modelling has been recently applied to free sintering. The simulation of sintering should be based on constitutive equations describing the thermo-mechanical behaviour of the material under any state of stress and any temperature which may arise within the sintering body. These equations can be drawn either from experimental data or from micromechanical models. The experiments usually consist in free sintering and sinter-forging tests. Indeed applying more complex loading conditions at high temperature under controlled atmosphere is delicate. Micromechanical models describe the constitutive behaviour of aggregates of spheres from the deformation of two-sphere contact either by viscous flow or grain boundary diffusion. Such models are not able to describe complex microstructure and mechanisms as observed in real materials but they can give some basic information on the formulation of constitutive equations. Practically both experimental and theoretical approaches can be coupled to identify the constitutive equations. Such procedure has been performed for modelling the sintering of compacts obtained by die pressing of a mixture of tungsten carbide and cobalt powders. The constitutive behaviour of this material during sintering has been described by a linear viscous constitutive model, whose functions have been fitted from results of free sintering and sinter-forging experiments. This model has next been introduced in ABAQUS finite element code to simulate the sintering of heterogeneous green compacts of various geometries at constant temperature. Examples of simulations are shown and compared with experiments.

• Wind and Structures
• /
• 제37권4호
• /
• pp.289-302
• /
• 2023

Insulating glass units (IGUs) have been widely used in buildings in recent years due to their superior thermal insulation performance. However, because of the panel reciprocating motion and fatigue deterioration of sealants under long-term wind loads, many IGUs have the problem of early failure of watertight properties in real usage. This study aimed to propose a statistical method for wind-induced deflection of IGU panels during the whole life service period, for further precise analysis of the accumulated fatigue damage at the sealed part of the edge bond. By the estimation of the wind occurrence regularity based on wind pressure return period, the events of each wind speed interval during the whole life were obtained for the IGUs at 50m height in Beijing, which are in good agreement with the measured data. Also, the wind-induced deflection analysis method of IGUs based on the formula of airspace coefficient was proposed and verified as an improvement of the original stiffness distribution method with the average relative error compared to the test being about 3% or less. Combining the two methods above, the deformation of the outer and inner panes under wind loads during 30 years was precisely calculated, and the deflection and stress state at selected locations were obtained finally. The results show that the compression displacement at the secondary sealant under the maximum wind pressure is close to 0.3mm (strain 2.5%), and the IGUs are in tens of thousands of times the low amplitude tensile-compression cycle and several times to dozens of times the relatively high amplitude tensile-compression cycle environment. The approach proposed in this paper provides a basis for subsequent studies on the durability of IGUs and the wind-resistant behaviors of curtain wall structures.

• Composites Research
• /
• 제26권5호
• /
• pp.279-288
• /
• 2013

본 논문은 Loop 종류의 주파수 선택적 투과구조(FSS)를 결합시킨 복합재료 구조의 잔류응력으로 인한 층간분리, FSS의 손상 등 구조적 파손과 잔류응력으로 인해 변형된 FSS의 전파 투과 특성의 영향을 연구하였다. FSS는 단위요소 종류, 설계 변수, 배열에 따라 일정 대역에 전파를 투과 혹은 반사시킬 수 있다. 그래서 사각 루프 FSS를 복합재료와 결합시켰을 때 X-band(8~12 GHz)에서 공진이 발생하도록 설계한 후, 그에 따른 치수를 규격화하여 다른 루프형상(삼각 루프, 원형 루프)에 적용하고 단일 Loop와 이중 Loop 구조일 때 복합재료의 적층을 변화시켜 비교 분석하였다.

• 센서학회지
• /
• 제5권6호
• /
• pp.15-24
• /
• 1996

본 연구에서는 광섬유센서를 지능형 복합재 구조물에 적용하기 위한 기초적 연구의 일부로서, 구조물내에서의 광섬유센서의 건전성 평가와 주조물에 유발된 변현 및 손상에 대한 광섬유센서의 신호검출 거동을 연구 검토하였다. 첫째로, 최약체결파손이론에 거한 광섬유센서의 누적파손분포를 비교하고 수정계수를 도입함으로써, 굽힘시험이 인장시험을 대신할 수 있음을 보였다. 실험에 의해 Weibull 파라미터를 얻고, 굽힘시험에서 유도된 누적파손분포에 적용될 수정계수를 구했다. 열처리한 강섬유센서와 열처리하지 않은 광섬유센서의 인장강도 평균값을 비교함으로써 복합재료 적층관의 경화 사이클 동안 열처리에 의해 야기되는 광섬유센서의 건전성을 평가하였다. 둘째로, 직교적층판과 일방향적층판의 인장시험에서 측정된 시편의 응력-변형률과 삽입된 광섬유센서를 통과한 레이저신호 세기와의 관계를 검토하고, 광섬유센서를 이용한 효과적 손상검출 가능성을 연구 검토하였다.