• 제목/요약/키워드: thermal power generation plant

검색결과 153건 처리시간 0.025초

전기기기의 발열을 고려한 다단계 가속열노화 방법 (Multi-phase Accelerating Test Method of Thermal Aging Considering Heat Generation of Electric Equipment)

  • 임병주;박창대;정경열
    • 한국유체기계학회 논문집
    • /
    • 제16권5호
    • /
    • pp.18-23
    • /
    • 2013
  • Thermal aging test is performed to qualify the life time of equipment in thermally aged condition. Due to long life time more than 10 years like as in power plant, the equipment is subjected to the accelerated thermal aging condition which is able to shorten the long aging test period by increasing aging temperature. Normally, conservatism of thermal aging test causes to impose unbalanced and excessive thermal load on components of the equipment, and deformation and damage problems of the components. Additionally, temperature rise of each component through heat generation of the electric equipment leads to long-term problem of the test period. Multi-phase accelerating aging test is to perform thermal aging test in multiple aging conditions after dividing into groups with various components of equipment. The groups might be classified considering various factors such as activation energy, temperature rise, glass transition temperature and melting temperature. In this study, we verify that the multi-phase accelerating aging test method can reduce and equalize the thermal over load of the components and shorten aging test time.

복합화력발전소의 냉각수 배열회수를 위한 히트펌프의 성능평가 (Analysis on the Performance Test Results of Heat Pump for the Closed Cooling Water Heat Recovery on Combined Thermal Power Plant)

  • 이성호
    • 한국유체기계학회 논문집
    • /
    • 제19권2호
    • /
    • pp.43-48
    • /
    • 2016
  • This study proves successes of Energy Service Company (ESCO) business by heat pump performance test. The purpose of ESCO business is recover investment costs through saving energy from installation of energy reduction facility. The most important technology assessment items are heat recovery and generator output. Experimental result shows that increase quality of heat recovery (11.52Gcal/h), while decrease generator output (0.234kw). In its final analysis, the ESCO business is successful according to our data.

미활용 열에너지를 이용한 바이너리 발전과 신경망 제어 (Binary Power plant using unused thermal energy and Neural Network Controllers)

  • 한건영;박성대
    • 한국정보통신학회논문지
    • /
    • 제25권10호
    • /
    • pp.1302-1309
    • /
    • 2021
  • 최근, 정부는 경기침체 극복에 대응하고 구조적 변환에 따른 국제활동을 주도하기 위한 국가발전 전략으로 "한국판 뉴딜 종합계획"을 도입하였다. 한국판 뉴딜에서 에너지와 관련된 '그린뉴딜'은 배출 가스 제로화를 목표로 하고 저탄소 녹색 경제로의 전환을 가속화하는 것이며, 이를 위해 정부는 재생에너지 사용 확대를 촉진한다는 계획이다. 본 논문에서는 저탄소 녹색 경제로의 전환을 촉진하기 위해 미활용 저온 열에너지를 활용하는 바이너리 발전과 실제 발전환경에서 무인 자동운전을 통해 저 비용으로 유지관리가 가능한 신경망 기반 제어시스템에 대해 검토한다. 이러한 바이너리 발전의 실현은 태양광, 풍력 등과 더불어 재생에너지의 도입을 가속화 할 것으로 기대된다.

ESS를 이용한 발전소 터빈제어밸브 전개 운전 제어로직 제안 (Suggestion of Logic to Control Power Plant Equipped ESS in case of Full Open Turbine Control Valve)

  • 정인영;이재헌
    • 플랜트 저널
    • /
    • 제18권4호
    • /
    • pp.66-72
    • /
    • 2023
  • 신재생에너지 비중 증가에 따른 전력계통 불안정성과 탈원전, 노후 석탄화력 폐쇄로 인한 안정적인 발전자원 감소에 대한 대응 방안으로 터빈제어밸브 4개중 2~3개를 교축하여 발전기 출력 증·감발과 주파수를 추종하는 복합 변압 운전 방식을 터빈제어밸브를 전개하여 교축손실을 줄임으로서 발전 효율을 극대화하는 순 변압운전 방식으로 대체하고, 계통 주파수 변동에 신속하게 대응하기 위해 ESS를 연계하여 주파수 추종 및 자동발전운전을 하는 제어로직을 500MW 석탄화력인 태안 5호기를 대상으로 개발하였다. ESS 운전(신속한 응답, 용량 한계)과 발전소 터빈제어밸브 교축 운전(느린 응답, 지속적인 운전)의 장·단점을 보완하는 협조제어 알고리즘이 실제 발전소에 적용시 발전 효율 향상은 물론 전력 수요에 신속하고 유연하여 대응하여 계통 안정성에 기여할 것으로 확신한다.

  • PDF

100 kW급 용융탄산염 연료전지 발전시스템 개발

  • 임희천;김도형;서혜경;박성연;안교상
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
    • /
    • pp.140-148
    • /
    • 2005
  • The molten carbonate fuel cell (MCFC) is endowed with the high potential especially in future electric power generation industry by its own outstanding characteristics. KEPCO (KEPRI) started a 100 kW MCFC system development program in 1993 and has been executed 100kW system develpilot plant successfully completed first phaseopment by 2005 on the basis of successful results of 25kW system development. In this program, the components and mechanical structure for 100 kW stack and system construction were completed on last year and now system pre - commissioning was being executed. A 100 kW MCFC power plant was constructed at the site of Boryeong Thermal Power Plant. A 100 kW MCFC system has characterized as a high pressure operation mode, CO2 recycle, and externally reforming power generation system. The 100 kW MCFC system consisted with stacks which was made by two 50 kW sub-stacks, 90 cells with 6,000 cm2 active area and BOP including a reformer, a recycle blower, a catalytic burner, an inverter, and etc. The system has been operated from 13th of September on this year and produced 50 kW AC under atmospheric pressure condition and expected to operate by the end of this year.

  • PDF

스트레인게이지를 활용한 발전소 터빈 및 주증기 배관의 열팽창 측정 (Thermal Expansion Measurement of Turbine and Main Steam Piping by Using Strain Gages in Power Plants)

  • 나상수;정재원;봉석근;전동기;김윤석
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.886-891
    • /
    • 2000
  • One of the domestic co-generation plants have undergone excessive vibration problems of turbine attributed to external force for years. The root cause of turbine vibration may be shan alignment problem which sometimes is changed by thermal expansion and external farce, even if turbine technicians perfectly performed it. To evaluate the alignment condition from plant start-up to full load, a strain measurement of turbine and main steam piping subjected to thermal loading is monitored by using strain gages. The strain gages are bonded on both bearing housing adjusting bolts and pipe stoppers which. installed in the x-direction of left-side main steam piping near the turbine inlet in order to monitor closely the effect of turbine under thermal deformation of turbine casing and main steam piping during plant full load. Also in situ load of constant support hangers in main steam piping system is measured by strain gages and its results are used to rebalance the hanger rod load. Consequently, the experimental stress analysis by using strain gages turns out to be very useful tool to diagnose the trouble and failures of not only to stationary components but to rotating machinery in power plants.

  • PDF

공정열 및 수소생산을 위한 초고온가스로 열평형 분석 (Heat balance analysis for process heat and hydrogen generation in VHTR)

  • 박소영;허균영;유연재;이상일
    • 에너지공학
    • /
    • 제25권4호
    • /
    • pp.85-92
    • /
    • 2016
  • 초고온가스로는 열출력 밀도가 낮아 노심용융의 가능성이 낮으며, 냉각재 상실사고 시 수소 발생 등으로 인한 폭발의 위험도 없다. 안전성 측면의 장점과 더불어 냉각재를 초고온으로 만들어 전력생산이외에 산업시설용 공정열로의 응용도 가능하다. 본 논문에서는 초고온가스로를 일차계통으로 하고, 전력 및 공정열 공급이 가능한 이차계통의 개념 설계를 담고 있다. 기존에 NGNP(Next Generation Nuclear Part)에서 제안한 350 MW 열출력 원자로 모델을 기반으로 수소생산 루프와는 별도로 전력생산을 위한 300 MW의 열에너지를 중간열교환기를 통해 이차계통으로 전달하는 참조모델을 개발하고, 이를 열역학적 측면에서 분석하였으며 이차계통 각 지점에서 주요 설계변수에 따른 효율분석과 최적화개념 연구를 수행하였다.

증기터빈 발전소의 자동 부하 증감발 운전(AGC) 제어로직 구현 및 적용 (Application of Automatic Generation Control Logic for a Thermal Power Plant)

  • 우주희;김종안
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 D
    • /
    • pp.2147-2149
    • /
    • 2001
  • 국내 한 증기터빈 발전소의 출력증감발 운전을 중앙급전 명령에 의해 가능하도록 하는 제어로직을 구현하였다. 이는 중앙급전으로부터 증감발 펄스 신호를 입력받아 발전기 출력 설정치를 변경함으로써 이루어지고, 증감되는 양은 펄스의 지속시간에 의해 이루어지며 여러 가지 운전상황에 대해 원활한 운전전환이 이루어져야 한다. 본 논문에서는 이를 구현하기 위해 제어로직 및 운전원 조작 화면의 구성을 소개하고자 한다.

  • PDF

Economic Evaluation of Coupling APR1400 with a Desalination Plant in Saudi Arabia

  • Abdoelatef, M. Gomaa;Field, Robert M.;Lee, YongKwan
    • 시스템엔지니어링학술지
    • /
    • 제12권1호
    • /
    • pp.73-87
    • /
    • 2016
  • Combining power generation and water production by desalination is economically advantageous. Most desalination projects use fossil fuels as an energy source, and thus contribute to increased levels of greenhouse gases. Environmental concerns have spurred researchers to find new sources of energy for desalination plants. The coupling of nuclear power production with desalination is one of the best options to achieve growth with lower environmental impact. In this paper, we will per-form a sensitivity study of coupling nuclear power to various combinations of desalination technology: {1} thermal (MSF [Multi-Stage Flashing], MED [Multi-Effect Distillation], and MED-TVC [Multi-Effect Distillation with Thermal Vapour Compression]); {2} membrane RO [Reverse Osmosis]; and {3} hybrid (MSF-RO [Multi-Stage Flashing & Reverse Osmosis] and MED-RO [Multi-Effect Distillation & Reverse Osmosis]). The Korean designed reactor plant, the APR1400 will be modeled as the energy production facility. The economical evaluation will then be executed using the computer program DEEP (Desalination Economic Evaluation Program) as developed by the IAEA. The program has capabilities to model several types of nuclear and fossil power plants, nuclear and fossil heat sources, and thermal distillation and membrane desalination technologies. The output of DEEP includes levelized water and power costs, breakdowns of cost components, energy consumption, and net saleable power for any selected option. In this study, we will examine the APR1400 coupled with a desalination power plant in the Kingdom of Saudi Arabia (KSA) as a prototypical example. The KSA currently has approximately 20% of the installed worldwide capacity for seawater desalination. Utilities such as power and water are constructed and run by the government. Per state practice, economic evaluation for these utilities do not consider or apply interest or carrying cost. Therefore, in this paper the evaluation results will be based on two scenarios. The first one assumes the water utility is under direct government control and in this case the interest and discount rate will be set to zero. The second scenario will assume that the water utility is controlled by a private enterprise and in this case we will consider different values of interest and discount rates (4%, 8%, & 12%).

무연탄 혼소 500 MW 석탄화력발전소에서 보일러 운전조건이 미연탄소 발생에 미치는 영향 (Effect of Boiler Operating Conditions on the Generation of Unburned Carbon in Anthracite Co-fired 500 MW Thermal Power Plant)

  • 남정철;유호선
    • 플랜트 저널
    • /
    • 제14권3호
    • /
    • pp.35-41
    • /
    • 2018
  • 최근 북한에 대한 정부정책 기조와 북한의 전력설비 상황을 고려할 때 북한 무연탄을 우리나라 석탄화력발전소에서 소비할 수 있도록 그에 대한 대비가 필요할 것이다. 본 연구에서는 500 MW 석탄화력발전소에서 보일러 내 무연탄 주입위치, 미분도 및 연소용 공기유량 등 주요 운전조건을 변화시키면서 미연탄소 발생에 미치는 영향을 파악하기 위한 무연탄 혼소시험을 실시하였다. 주연소영역 체류시간이 상대적으로 긴 보일러 하부로 무연탄을 주입할 때 미연탄소 발생이 현저히 감소하고, 연소반응 표면적과 비례하는 미분도를 증가시켜도 미연탄소 발생이 감소하는 것을 확인하였다. 연소반응성을 증가시키는 공기유량의 증가도 미연탄소 저감에 기여한다. 주어진 혼소율에 대하여 상기의 운전조건 조절을 통하여 미연탄소 발생을 석탄회 재활용 품질기준인 5 % 이하로 유지하는 것이 가능하며, 시험범위 내에서 운전조건 변경의 우선 순위는 무연탄 주입위치가 가장 높다.

  • PDF