• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.226-232
• /
• 2005

최근 많은 나라들이 상용전원의 왜곡을 방지하기 위해 AC 라인에 직접 연결하는 제품에 IEC 61000-3-2 나 IEEE 59 와 같은 고조파 규제를 가하고 있다. 따라서 최근 차세대 디스플레이 소자로 각광을 받고 있는 PDP(플라즈마 디스플레이 패널) 역시 이런 규제치를 만족하기 위해 역률개선회로를 부착하고 있다. 기존의 PDP 파워 모듈에서는 일반적으로 잘 알려진 부스트 컨버터를 이용해 역률개선회로를 구성하여 사용하였다. 그러나 PDP 자체의 열과 브리지 다이오드의 과도한 발열 때문에 시스템의 안전성을 보장할 수가 없었다. 본 논문에서는 PDP 파워 모듈용 역률개선회로로 브리지 없는 부스트 컨버터를 이용함으로써 효율, 소자 수, 발열상태 등 여러 가지 측면에서 기존회로와 비교 분석을 하고 그것의 제품 적용 가능성을 살펴보고자 한다.

• 대한전자공학회논문지SD
• /
• 제37권11호
• /
• pp.9-17
• /
• 2000

폭발성 가스의 종류 및 그 양을 검지하기 위한 10개의 개별 센서가 한 기판위에 집적된 센서어레이를 개발했다. 이 센서어레이는 각종 가스에 대해 다양한 감도 패턴을 가지며, $SnO_2$를 모물질로 하는 10개의 산화물 반도체 가스센서로 구성하였다. 나노사이즈이며 큰 비표면적을 가진 모물질에 서로 다른 첨가물을 첨가하여 감지물질를 제작함으로써 저농도에 대한 감도 및 재현성을 높였고, 센서어레이 전반에서 균일한 온도 분포가 되도록 설계하였다. $400^{\circ}C$에서 동작하는 센서어레이로부터 얻은 감도를 이용하여 주성분 분석 기법을 통해 폭발 하한값의 범위에서 부탄, 프로판 그리고 메탄 등과 같은 폭발성 가스의 종류 및 양을 신뢰성 있게 식별할 수 있었다.

• 한국주조공학회지
• /
• 제29권6호
• /
• pp.257-264
• /
• 2009

The effects of silicon and molybdenum on the temperature-dependent properties of high silicon and high molybdenum ductile cast iron were investigated. Microstructure was composed of ferrite, cell boundary complex carbide, carbide precipitated in the grain and graphite. The number and size of carbide decreased with the increase of silicon content and increased with the increase of molybdenum content, however, the size of cell boundary carbide increased above 0.81wt%Mo. The room temperature tensile strength increased with the increase of silicon and molybdenum contents. That did not increase with the latter with more than 0.8wt%. Meanwhile the high temperature tensile strength showed the similar trend to that of room temperature one, that of the specimen with 0.55wt%Mo was the highest. The $A_1$ transformation temperature increased with the silicon and molybdenum contents, and showed similar tendency with the variation of strength. It was discussed due to the solubility limit of Molybdenum in ferrite, of which value was assumed to be in the vicinity of 0.81wt%Mo. The weight after oxidation at 1,173K showed the result caused by the difference in solubility of molybdenum in the matrix. That and the thickness change after oxidation did not show any consistent trend with the silicon and molybdenum contents.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2866-2874
• /
• 2000

This paper is concerned with the optimum design for external reinforcement of a nuclear reactor pressure vessel(RPV) in a severe accident. During the severe reactor accident of molten core, the temperature and the pressure in the nuclear reactor rise to a certain level depending on the initial and subsequent condition of a severs accident. The reis of the temperature and the internal pressure cause deterioration of the load carrying capacity and could cause failure of the RPV lower head. The deterioration of failure can be mitigated by the external cooling or the reinforcement of the lower head with additional structures. While the external cooling forces the temperature of an RPV to drop to the desired level, the reinforcement of the lower head can attain both the increase of the load carrying capacity and the temperature drop. The reinforcement of the lower head can be optimized to have the maximum effect on the collapse pressure and the temperature at the inner wall. Optimization results are compared to both the result without the reinforcement and the result with the designated reinforcement.

• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.935-941
• /
• 2010

하나로는 한국에 설치되어 있는 열출력 30MW의 개방 수조형 연구로 이다. 이는 발전로와 달리 원자로에서 발생하는 열을 이용하여 전기를 생산하는 것 대신에 원자로의 노심 온도를 유지하기 위하여 냉각탑을 통해 대기로 이 열을 냉각한다. 냉각탑 월간 점검 중에 냉각탑 4번의 냉각팬 감속기가 기준을 상회하는 고진동을 기록하였다. 본 연구의 목적은 고진동의 원인을 찾아 정상적으로 수리하기 위함이다. 연구 방법은 FFT 스펙트럼 기법을 적용하여 고진동의 원인을 분석하였다. 그 결과 고진동 주파수는 피니언 기어의 고유 진동수의 두 배인 354Hz이었다. 피니언 기어를 점검한 결과 이빨 표면이 깨져 있었다. 깨진 피니언 기어를 제거하고 새것으로 교체한 후에는 감속기는 정상적으로 작동하였다.

• Nuclear Engineering and Technology
• /
• 제23권3호
• /
• pp.316-320
• /
• 1991

COLSS는 정상 운전시 DNBR 및 LHR의 운전 제한 조건을 감시하는 디지탈 노심감시계통이다. 영광 3, 4호기 COLSS는 현재 노내 계측기 신호를 입력으로 하여 5차의 Fourier 합성법에 의해 노심의 축방향 출력분포를 계산한다. 그러나 5차의 Fourier 합성법은 특정의 축방향 출력 형태, 특히 말안장 모양의 출력분포에 대해서 그 정확성이 떨어져 노심의 운전 여유도를 감소시키는 요인이 되고 있다. 본 연구에서는 축방향 출력분포 계산의 정확성을 증대 시키기 위해 COLSS에 Cubic Spline합성법을 적용하였다. 그 결과, Fourier합성법을 적용한 기존의 COLSS보다 RMS오차의 관점에서 최고 5%까지 그 정확도가 향상되었다.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.54-60
• /
• 2006

Fitting process carried out in automobile transmission assembly line is classified into three classes; heat fitting, press fitting, and their combined fitting. Heat fitting is a method that heats gear to a suitable range under the tempering temperature and squeezes it toward the outer diameter of shaft. Its stress depends on the yield strength of gear. Press fitting is a method that generally squeezes gear toward that of shaft at room temperature by press. Another method heats warmly gear and safely squeezes it toward that of shaft. Warm shrink fitting process for automobile transmission part is now gradually increased, but the parts (shaft/gear) assembled by this process produced dimensional changes of gear profile in both radial and circumferential directions. So that it may cause noise and vibration between gears. In order to solve these problems, we need an analysis of warm shrink fitting process, in which design parameters are involved; contact pressure according to fitting interference between outer diameter of shaft and inner diameter of gear, fitting temperature, and profile tolerance of gear. In this study, an closed form equation to predict contact pressure and fitting load was proposed in order to develop optimization technique of warm shrink fitting process and verified its reliability through the experimental results measured in the field and FEM, that is, thermal-structural coupled field analysis. Actual loads measured in the field have a good agreement with the results obtained by theoretical and finite element analysis and also the expanded amounts of the gear profile in both radial and circumferential directions are within the limit tolerances used in the field.

• 천문학회지
• /
• 제48권5호
• /
• pp.313-323
• /
• 2015

Active galactic nuclei (AGN) are known for irregular variability on all time scales, down to intra-day variability with relative variations of a few percent within minutes to hours. On such short timescales, unexplored territory, such as the possible existence of a shortest characteristic time scale of activity and the shape of the high frequency end of AGN power spectra, still exists. We present the results of AGN single-dish fast photometry performed with the Korean VLBI Network (KVN). Observations were done in a “anti-correlated” mode using two antennas, with always at least one antenna pointing at the target. This results in an effective time resolution of less than three minutes. We used all four KVN frequencies, 22, 43, 86, and 129 GHz, in order to trace spectral variability, if any. We were able to derive high-quality light curves for 3C 111, 3C 454.3, and BL Lacertae at 22 and 43 GHz, and for 3C 279 at 86 GHz, between May 2012 and April 2013. We performed a detailed statistical analysis in order to assess the levels of variability and the corresponding upper limits. We found upper limits on flux variability ranging from ~1.6% to ~7.6%. The upper limits on the derived brightness temperatures exceed the inverse Compton limit by three to six orders of magnitude. From our results, plus comparison with data obtained by the University of Michigan Radio Astronomy Observatory, we conclude that we have not detected source-intrinsic variability which would have to occur at sub-per cent levels.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.35-40
• /
• 1985

The composition of the base glass was determined to be $Na_2O$ 15, $Fe_2O_3$ 35, $B_2O_3$ 0~20, $P_2O_5$ 30~50 by mole percent. The heating temperature for nucleation was determined by means of thermal expansion curve. Crystalline phases were investigated by X-ray diffraction method and I.R Spectra. Electrical conductivities of glass spec-imens were observed in the temperature range 25~20$0^{\circ}C$ The activation energies of these specimens were caculated. The results obtained were as follows : 1) The limit composition of the melts 15mol% $Na_2O$ 35mole% $Fe_2O_5$ 20mole% $B_2O_3$ 30mole% $P_2O_5$ was able to be formed into desired shapes during cooling, . 2) In the measurement of d. c conductivity($\delta$) on the glasses in the system $15Na_2O-35Fe_2O_3$-$B_2O_3$-(50-x) $P_2O_5$ the values decreased by replacing 5 mole% $P_2O_5$ with $B_2O_3$ 3) The d. c conducties of heat treated samples were increased by replacing $P_2O_5$ with $B_2O_3$ 4) $B_2O_3$ contributed to precipitate crystals such as${\gamma}$-$Fe_2O_3$ $Fe_3O_4$ which had the advantage of electronic conduction in heat treated samples. 5) The slope plotted Log($\delta$) versus 1/T in this glass system was linear in the measured temperature range.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1547-1552
• /
• 2008

The tip of these catheter with straight needles is not able to reach in the vicinity of the disc bulging, which are the cause of the low back pain and because the far indirect radio-frequency treatment results in the decompression, the nucleoplasty has the limit. Many incurable diseases has not been solved due to the unexistence of the advanced technique for the MIS human body catheter device. To increase the possibility of nucleoplasty, the needle tip should be located at the closest area of the lesion. For this reason, the best way to increase the success rate of the operation is that the needle tip should access 3-dimensionally to the operating field as soon as possible. To achieve this aim, our studies are restricted as follows: 1) the SMA catheter design to control the 3-dimensional direction, 2) the security of the immediate response by the positive control of the SMA element thermal distribution using Peltier thermoelectric elements, 3) the aquisition of the control data by monitoring the relationship between the temperature of SMA element and the displacement, and 4) the design of the controller to guarantee the accurate location.