• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.300-310
• /
• 2008

Through this study, a conceptual design for the next generation high-speed EMU has been derived to meet the crash worthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulations require some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 km/h, and a collision against a standard deformable obstacle of 15 ton at 110km/h. The complete train set will be composed of 2TC-6M with 13 ton axle load, which is different from KTX with the power car of 17 ton axle load. Using theoretical and numerical analyses, a crashworthy conceptual design was derived in terms of mean crush forces and energy absorptions for principal crushable structures and devices. The derived conceptual design was evaluated and improved using one dimensional dynamic simulations for the bar-spring-damper-mass model. It is shown from the simulation results that the suggested conceptual design can easily satisfy domestic crashworthiness requirements.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.2
• /
• pp.282-309
• /
• 2010

Recently, technology acquisition through technology trade plays a critical role in obtaining national competitiveness in a global era. However, current studies mostly focus on grasping the characteristics or macro status of technology trade and analyzing the impact of technology acquisition through the technology transaction, leading to the failure of providing a theoretical and practical background of national policy-making. Therefore, this research aims at investigating the concentration rate of technology, companies and countries where Korean companies obtain technological capability on the basis of the Bank of Korea's data related to 'loyalty payment in technology licensing', additionally analyzing the types of exported technology and loyalty payment. From these analyses, the degree of concentration that pre-defined 31 technology classifications depend on specific technologies, companies and nations are examined and the characteristics of technology trade types are investigated. The results of this research can be used to make a technology policy and analyze the characteristics of technology innovation of Korea industries.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.35.3-36
• /
• 2009

To investigate properties of the stellar contents of the resolved asymptotic giant branch stars in the nearby dwarf galaxies, we obtained wide-field JHKs images of the dwarf irregular galaxies NGC 6822, IC 1613 and the dwarf elliptical galaxy NGC 205, using the WIRCam near-infrared imager of the CFHT. The obtained (J-Ks, Ks) and (H-Ks, Ks) color-magnitude diagrams for the resolved stars in the galaxies contain populations of foreground stars, super giant stars, red giant stars and the asymptotic giant branch (AGB) stars. Using corollary photometric data in the visible bands, AGB stars were selected in the color-magnitude diagrams with a wide wavelength baseline in color indices. In color-color diagrams of the resolved AGB stars, we identified C stars from M giant stars for each galaxies, i.e., 726 C stars in NGC 6822, 126 C stars in IC 1613 and 593 C stars in NGC 205. The number ratios of C stars to M-giants were estimated to be $0.59\pm0.03$ in NGC 6822, $0.30\pm0.03$ in IC 1613 and $0.14\pm0.01$ in NGC 205. From analyses of the correlations of the spatial distribution of the C/M ratios with the HI properties and dynamical structures of the target galaxies, we discuss environmental effects of the star formation in the galaxies. We also discuss the epochs of the AGB star formation in the galaxies by comparing theoretical isochrones with the color distributions and luminosity functions of the AGB stars.

• Composites Research
• /
• v.28 no.6
• /
• pp.340-347
• /
• 2015

As resin impregnates through the fiber preform in vacuum assisted resin transfer molding process, the volume of fibers is changed by expansion of fiber mat according to filling time. It causes not only the change in dimension but also the decrease of mechanical properties of the composite product. Moreover, it results in the economic loss by increase of the used amount of resin especially in the large product such as wind turbine blade. In this study, the ways to control fiber volume fraction were investigated by both the experimental and theoretical analyses on the expansion of fiber preform as the preform was impregnated by resin in the VARTM process. Two kinds of swelling stage were observed as flow front progressed, which was analyzed by comparing the experimental and simulation results. The process parameters are expected to be optimized by investigating the swelling behavior of fiber preform in the manufacturing process of the composite product.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.556-565
• /
• 2002

The concrete bridge decks on the main girder will usually develop initial cracks in the longitudinal or the transverse direction due to dry shrinkage and temperature change, and as the bridge decks age the crack will gradually develop in different directions due to repeated cyclic loads. The strengthening direction of the concrete bridge deck is a very important factor in improving proper structural behavior. Therefore, in this study, theoretical analyses of strengthened bridge decks were performed using the nonlinear finite element method. To improve the accuracy of the analytical result, boundary conditions and material property of strengthening material was simulated by laboratory condition and test results, respectively. The effect of the strengthening direction and the amount of strengthening material were estimated and compared to the experimental results. The efficiency of the strengthened bridge decks by strengthening variables such as the amount, width and thickness of CFS was observed.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.470-481
• /
• 2003

Exterior plate-column connection has an unsymmetrical critical section for eccentric shear of which perimeter is less than that of interior connection, and hence, around the connection, unbalanced moment and eccentric shear are developed by both gravity load and lateral loads. Therefore, exterior connection is susceptible to punching shear failure. Current design provision cannot accurately explain strength of existing experiments, partly due to the complexity in the behavior of exterior plate-column connection, or partly due to the theoretical deficiency of the strength analysis model adopted. In the present study, nonlinear finite element analyses were performed for exterior connections belonging to continuous flat plate. For each direction of lateral load, the behavior and strength of exterior plate-column connection were quite different. Based on the numerical result, strength prediction model for exterior connection was proposed for each direction of lateral load. Compared with existing experiments, the proposed method was verified.

• Korean Journal of Social Welfare
• /
• v.56 no.4
• /
• pp.195-214
• /
• 2004

As one of the essential elements of social work practice, knowledge articulates what the social work profession is doing and ought to do. With an emphasis on building a body of knowledge for the profession, this study analyses the nature of social work knowledge. First, the study examines concepts of social work theories and models, which are built around separate clusters of concepts from a broad base of theoretical orientation. The study reviews epistemological and ideological debates over how to perceive and approach social issues and the role of the social work profession. In organizing a clear conceptual framework for social work practice, different frames of reference and selective and fragmentary knowledge from other disciplines are considered barriers. For the development of a clear identity as a unified profession and the prospects of a value-based profession, more attention needs to be given to specify practical knowledge that is contextual and appropriate to practice settings and more sensitive to social issues.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.452-465
• /
• 2016

In this study, the structure of a concave annular array transducer was optimized to generate high intensity focused ultrasound for medical therapeutic application. The transducer has a phased array structure composed of several concentric channels that have 40 mm as the radius of curvature. We derived theoretical equations to analyze the sound field of the transducer and verified the validity of the equations by comparing the results calculated by the equations with those from finite element analyses. We also checked the possibility of dynamic focusing at around the geometric focal point. Further, the level of a grating lobe occurring at an unwanted position in the transducer sound field was confirmed to be reducible through the relation between the number of channels and the frequency of the transducer. Hence, the structure of the transducer was optimized to place the main lobe within a specific range from the zenith while systematically reducing the level of the maximum sidelobe including the grating lobe. The designed structure showed the performance better than that targeted at all the focal points.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.61-72
• /
• 2011

Greenhouses gas emission due to usage of fossil fuel has been known as one of the main causes of global warming. Fundamentally, greenhouse gas is a by-product of economic activity. Since majority of economic activity happens in an urban setting, a countermeasure in an urban setting is needed. Therefore, an analysis of relationship between carbon dioxide emission and urban form will be investigated for urban planning and management in the future. The purpose of this study is to analyze the relationship between carbon dioxide emission and urban spatial patterns, and suggesting an urban form with low carbon dioxide emission. In order to achieve this, first theoretical analysis was carried out on urban spatial patterns related to physical size, usage rate, and activity level. Secondly, Seoul's dam on electricity, natural gas, local heating, petroleum, and water usage and mapping a carbon dioxide emission map. Thirdly, relationship between carbon dioxide emission and urban spatial patterns are analyzed and urban spatial patterns that affects energy usage in urban setting was elucidated, and elicited implications on future directions on urban planning based on our analyses above.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.799-812
• /
• 2017

Backfill grouting and realistic convergence distribution were not properly considered in previous studies on 2D numerical analysis of a shield TBM tunnel. In this study, a modeling method was suggested to cope with this problem by considering a realistic convergence distribution and proper properties of backfill grouting. To this end, the influence of gap parameter and depth of rock cover on volume loss and composed of ground volume loss around tunnel excavation and surface volume loss were analyzed with a single layer of weathered soil. As a result, most of surface settlements were occurred immediately after excavation. Additional, as depth of rock cover and gap parameter increased, the influence range of surface settlement curves obtained from 2D numerical analyses became broader than a suggested theoretical equation. Therefore, it is inferred that gap parameter should be applied based on load distribution ratio and the property of backfill grouting properly considered for the estimation of the precise behavior of a shield TBM tunnel in 2D numerical analysis.