• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.749-761
• /
• 2010

The switching frequency of a power device is a very important parameter in the design of a parallel active power filter (PAPF), but so far, very little discussion has been conducted on it in a quantitative manner in previous publications. In this paper, an extensive analysis on the effects of the switching frequency on the performance of a PAPF is made, and a specification of the switching frequency values with different compensation results is presented. A first-order inertia element and a second-order oscillation element are considered as approximate models of a PAPF, respectively. The compensation characteristic for each order of harmonic current is obtained at different switching frequencies. Then, the THDs of each model for the system loads of a rectifier with resistance and inductance loads are proposed. The compensation results of a PAPF controlled as a first-order inertia element are better than those of a PAPF controlled as a second-order oscillation element. With two types of system loads which are rectifier with resistance and inductance loads and rectifier with resistance, inductance and capacitance loads, the THDs of the source current after compensation are presented with different switching frequencies. The compensation characteristics for the most widely used digital control system are investigated. The situation with an analog control is the theoretical characteristic and it is the best situation. The compensation characteristic of the digital control is worse than the compensation characteristic of the theoretical characteristic. Based on these analyses, the specifications of compensation characteristics with different switching frequencies are quite straightforward. Finally, a practical design example is studied to verify the application.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.1-7
• /
• 2009

Escape distance and escape barrier are critical elements for the quantitative evaluation of escape safety. Through theoretical demonstration and modeling in precedent studies, they have been analyzed for their generality and applicability. To make more practical evaluation method, we should quantitatively analyze the influence of each barrier and escape condition on escape safety considering various barriers in escaping routes. In this study, to develop more accurate and applicable escape analysis model, we have focused on three research methods as below: First, we derived quantified function to predict various escape barriers in escaping routes by theoretical analyses of the escape barriers and conditions. Second, we substituted the derived quantified function for an evaluation tool of escape safety suggested by precedent studies. Third, we examined applicability and feasibility of the developed method by modeling with the consideration of the escape conditions and barriers.

• Cross-Cultural Studies
• /
• v.26
• /
• pp.405-444
• /
• 2012

This paper is based on the view that film should be conceived as a form of cultural practice whose meaning is always in the process of being produced within diverse socio-cultural contexts and aims to examine the ways in which the meaning of Korean film is (re)mediated or received in diverse cultural contexts outside the country. In this paper, we employ two theoretical grounds. Firstly, it positions itself in line with the audience studies within the field of cultural studies where the audience is conceived as active agents who produce the meaning of a popular culture text. The recruitment of the theoretical propositions from the audience studies enables recognition of the significance of the reception in film practice which recently seems to be oriented on production and distribution. Secondly, we conceive transnationality of film as that which is being produced in the process of transaction between the film and the audience, that is to say, transnationality is a form of discourse that emerges upon cultural interaction. The empirical work involves examination of a set of reviews of four films--Chihwaseon, Oldboy, Thirt, Poety--that have been published in daily newspapers and some popular film magazines in the U. S., the U. K. and France. Through the analysis of the film reviews, we identify four interpretive schemes or rather discourses recruited via which the Korean films are approached and understood: auteurism, formalism, universal themes, emotional response. We propose that these four kinds of discourse provide a common ground for the audience from different cultural backgrounds to understand Korean film. Furthermore, we also suggest that transnationality of Korean cinema needs to be reconsidered in terms of the reception as the audience from different socio-cultural backgrounds should be understood as active agents who are capable of engaging in Korean cultural texts such as film in their own way producing various meanings and these are also constituent of the meaning of the cultural texts.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.97-108
• /
• 2023

Two carbonaceous adsorbents CAT and CARBOPAL were tested for reducing the concentration of the three herbicides in water: 2,4-D (2,4-dichlorophenoxyacetic acid), TCP (2,4,6-trichlorophenol) and metolachlor. Textural and chemical characterization of the adsorbents include nitrogen isotherms, FTIR, titration and thermogravimetric analyses. Adsorption was studied in discontinuous adsorption experiments at different pH values. The experimental adsorption isotherms data were fitted to four theoretical models. Adsorbent characterization reveals that CAT has higher micropore area, lower pore diameter and lower acidity than CARBOPAL. The adsorption is a second-order process and the isotherms best fitted to Sips model. The efficiency of the process depends mainly on the charge of the adsorbate for TCP and 2,4-D, but it depends on the charge of the surface for metolachlor. Adsorption capacity is higher on CAT for 2,4-D and TCP (small molecules), and it is higher on CARBOPAL for metolachlor (large molecules). Theoretical calculations clearly support this assumption.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4253-4264
• /
• 2022

Since the implementation of the phosphate project in Bled El-Hadba (BEH) deposit, western region of Tébessa, no detailed study has been conducted to assess the natural radioactivity distribution and the associated radiological risk parameter for this open-pit mine. For the sake of determining a credible premining reference database for the region of interest, 21 samples were collected from different geological layers of the above-mentioned deposit. Gamma Spectrometry was applied for measuring radioactivity using a high resolution HPGe semiconductor detector. The obtained activity results have shown a significant broad variation in the radioactive contents for the different phosphate samples. The total average concentrations (in Bq·kg^-1) for ²²⁶Ra, ²³⁸U, ²³⁵U, ²³²Th and ⁴⁰K computed for the different type of phosphate layers were found to be 570 ± 169, 788 ± 280, 52 ± 18, 66 ± 6 and 81 ± 18 respectively. The mean activity concentrations of the measured radionuclides were compared to other regional and worldwide deposits. The ratios between the detected radioisotopes have been calculated for spatial distribution of natural radionuclides in the study area. Based on the aforementioned activity concentrations, the corresponding radiation hazard parameters were assessed. Correlations between the obtained parameters were drawn and a multivariate statistical analysis (Pearson Correlation, Cluster and Factor analysis) was carried out in order to identify the existing relationships.

• Structural Engineering and Mechanics
• /
• v.86 no.4
• /
• pp.443-459
• /
• 2023

This study investigates the theoretical thermal buckling analyses of thick porous rectangular functionally graded (FG) plates with different geometrical boundary conditions resting on a Winkler-Pasternak elastic foundation using a new higher-order shear deformation theory (HSDT). This new theory has only four unknowns and involves indeterminate integral variables in which no shear correction factor is required. The variation of material properties across the plate's thickness is considered continuous and varied following a simple power law as a function of volume fractions of the constituents. The effect of porosity with two different types of distribution is also included. The current formulation considers the Von Karman nonlinearity, and the stability equations are developed using the virtual works principle. The thermal gradients are involved and assumed to change across the FG plate's thickness according to nonlinear, linear, and uniform distributions. The accuracy of the newly proposed theory has been validated by comparing the present results with the results obtained from the previously published theories. The effects of porosity, boundary conditions, foundation parameters, power index, plate aspect ratio, and side-to-thickness ratio on the critical buckling temperature are studied and discussed in detail.

• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.143-159
• /
• 2023

Recently, the design of scaffolding systems has garnered considerable attention due to the increasing number of scaffold collapses. These incidents arise from the underestimation of imposed loads and the site-specific conditions that restrict the application of lateral restraints in scaffold assemblies. The present study is committed to augmenting the buckling resistance of vertical support members, obviating the need for supplementary lateral restraints. To achieve this objective, experimental and computational analyses were performed to assess the axial load buckling capacity of steel props, composed of two hollow steel pipes that slide into each other for a certain length. Three full-scale steel props with various geometric properties were tested to construct and validate the analytical models. The total unsupported length of the steel props is 6 m, while three pins were installed to tighten the outer and inner pipes in the distance they overlapped. Finite Element (FE) modeling is carried out for the three steel props, and the developed models were verified using the experimental results. Also, theoretical analysis is utilized to verify the FE analysis. Using the FE-verified models, a parametric study is conducted to evaluate the effect of different inserted pipe lengths on the steel props' axial load capacity and lateral displacement. Based on the results, the typical failure mode for the studied steel props is global elastic buckling. Also, the prop's elastic buckling strength is sensitive to the inserted length of the smaller pipe. A threshold of minimum inserted length is one-third of the total length, after which the buckling strength increases. The present study offers a prop with enhanced buckling resistance and introduces an equation for calculating an equivalent effective length factor (k), which can be seamlessly incorporated into Euler's buckling equation, thereby facilitating the determination of the buckling capacity of the enhanced props and providing a pragmatic engineering solution.

• Korean Journal of Culture and Social Issue
• /
• v.9 no.2
• /
• pp.1-17
• /
• 2003

The fundamental goal of this paper is to make a sketch of what trust looks like in Korean culture. To pursue this goal, we have resorted to materials linked to trust whose characteristics are theoretical, conceptual, observational and illustrational. Although a shortage of empirical and systematic data on trust is a big obstacle to profound understanding of trust operating in Korea, we would like to assign some significance to our attempt to conceptualize the concept of trust as it really is in the Maum(mind) of common Koreans. We believe that research paradigm for behavioral science should be cast off in research of mind-related phenomena like trust. A general practice cherished to date in doing psychological research is to pinpoint exclusively its focus on external manifestation of a given concept with no precedent analyses about it in anthropological and cultural-psychological perspectives. We would like to argue that complete understanding of naïve psychology of those phenomena should precede construction of psychological theories about them. That is, knowledge of interpretations, experiences and theories laypersons have in relation to mind-related phenomena has to be underpinnings of further theoretical elaborations about those phenomena.

• Computers and Concrete
• /
• v.33 no.3
• /
• pp.251-264
• /
• 2024

The present study pertains to the effects of variations in the location and size of drilled web openings on the behavior of fixed-fixed reinforced concrete (RC) beams. For this purpose, a reference bending beam with a transverse opening in each half span was tested to failure. Later, the same beam was modeled and analyzed with the help of finite element software using ABAQUS. Upon achieving close agreement between the experimental and numerical results, the location and size of the web opening were altered to uncover the effects of these factors on the shear strength and load-deflection behavior of RC beams. The experimental failure mode of the tested beam and the numerical results were also verified by theoretical calculations. In numerical analysis, when compared to the reference (D0) specimen, if the distance of the opening center from the support is 0 or h or 2h, reduction in load-bearing capacity of 1.5%-22.8% or 2.0%-11.3% or is 4.1%-40.7%. In other words, both the numerical analyses and theoretical calculations indicated that the beam behavior shifted from shear-controlled to flexure-controlled as the openings approached the supports. Furthermore, the deformation capacities, energy absorption values, and the ductilities of the beams with different opening diameters also increased with the decreasing distance of the opening from supports. Web compression failure was shown to be the predominant mode of failure of beams with large diameters due to the lack of sufficient material in the diagonal compression strut of the beam. The present study indicated that transverse openings with diameters, not exceeding about 1/3 of the entire beam depth, do not cause the premature shear failure of RC beams. Finally, shear damage should be prevented by placing special reinforcements in the areas where such gaps are opened.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.569-577
• /
• 2012

In this study, a theoretical investigation of optimized sleeper spacing which can suppress resonances of a railway track is attempted. To achieve this, we introduced a minimization problem in which the objective function is given by the wave transmittance and the design variable is defined by sleeper distribution. In the analysis the rail is modeled by a Timoshenko beam and the sleeper is represented by a mass. The infinite track analysis is realized by attaching the transmitting boundaries at both ends of the finite optimization region. Through numerical analyses the sleeper spacing effective in reduction of the transmittance is discussed. Furthermore, the feasibility of the proposed method is validated in the aspect of vibration reduction through response analyses for a harmonic load.