• 한국항공우주학회지
• /
• 제39권6호
• /
• pp.526-534
• /
• 2011

위성의 부피 및 무게 절감을 위하여, 전자, 열제어 및 구조를 하나의 시스템으로 일체화 시키는 다기능 구조체가 개발되어 적용되어 왔으며, 다기능 구조체는 전자장비 중 무게가 많이 나가는 섀시/프레임들, 케이블들 및 커넥터들을 제거 할 수 있다. 이런 기존의 다기능 구조체의 주요 사항은 전기·전자의 섀시/프레임들을 개발 비용 및 시간이 많이 요구 되는 MCMs (Multi-Chip Modules)로 대체 하는 것이다. 본 논문은 위성의 부피 및 무게를 효율적으로 절감할 수 있는 새로운 다기능 구조체의 개념을 보여준다. 구조는 열제어 및 우주방사차폐 기능을 포함한 사각형 격자강화 구조체로 설계 및 제작된다. 사각형 격자강화 구조체는 등방격자구조체의 수정형으로 일반적인 인쇄회로기판을 섀시/프레임 없이 내장할 수 있는 충분한 공간을 제공한다.

• 대한화학회지
• /
• 제29권3호
• /
• pp.233-238
• /
• 1985

비다공성 및 다공성 폴리스티렌 디비닐벤젠 공중합체를 합성하고, 이것을 클로로메틸화 한후, 메틸아민으로 아미노화하여 약염기성 음이온교환수지인, 50∼100mesh의 비다공성, N-APSTDVB와 다공성, P-APSTDVB를 만들었다. 합성한 이들 음이온교환수지를 적외선 흡수스펙트럼으로 확인하였다. 이들 음이온교환수지의 최대 이온교환용량은 4.86meq/g이었다. 다공성 폴리스티렌 디비닐벤젠 공중합체, P-APSTDVB의 세공용적은, 디비닐벤젠의 볼륨퍼센트를 30%로 하였을 때, X$_{diluent}$의 증가에 따라서 증가하였다. 또한 X$_{diluent}$의 양을 0.5로 일정하게 하였을때, P-APSTDVB공중합체의 세공용적은, 디비닐벤젠의 볼륨퍼센트가 증가함에 따라 증가하였다. 디비닐벤젠의 퍼센트를 8%로 일정하게 하고, X$_{heptane}$을 0.5로 하였을 때, 합성한 공중합체와 음이온교환수지의 세공용적은, P-PSTDVB >P-APSTDVB >N-PSTDVB순으로 감소하였다. 여러 농도하에서의, 여러종류의 알코올 수용액중에서의 N-APSTDVB음이온교환수지에 대한 붕산의 분포계수가, 또한 논의되었다.

• 공업화학
• /
• 제28권6호
• /
• pp.638-644
• /
• 2017

전기이중층 커패시터(electric double layer capacitor, EDLC) 전극용 핏치계 활성탄소섬유의 고출력 특성을 향상시키기 위하여 불소와 산소 혼합가스의 다양한 불소분압에 따라 함산소불소화 표면처리를 수행하였다. 함산소불소화 처리된 핏치계 활성탄소섬유는 불소 부분압이 증가함에 따라 선형적인 불소관능기의 증가를 보였고, 산소관능기는 증가하였으나 부분압에 따라 차이가 없었다. 또한 함산소불소화를 통하여 활성탄소섬유 표면의 식각 반응으로 인하여 비표면적 및 기공부피는 감소하였으나 중간기공 부피는 약 4.5배 증가하였다. 50%의 불소가스 분압으로 처리한 활성탄소섬유의 경우 5와 50 mV/s의 전압주입속도에서 비정전용량이 약 29%와 61%로 증가함을 확인하였다. 이러한 비정전용량의 향상은 함산소불소화 처리를 통한 활성탄소섬유 표면의 산소 및 불소 관능기의 도입과 중간기공의 증가에 의한 효과로 사료된다.

• Korean Journal of Radiology
• /
• 제22권10호
• /
• pp.1719-1729
• /
• 2021

Objective: Emphysema and small-airway disease are the two major components of chronic obstructive pulmonary disease (COPD). We propose a novel method of quantitative computed tomography (CT) emphysema air-trapping composite (EAtC) mapping to assess each COPD component. We analyzed the potential use of this method for assessing lung function in patients with COPD. Materials and Methods: A total of 584 patients with COPD underwent inspiration and expiration CTs. Using pairwise analysis of inspiration and expiration CTs with non-rigid registration, EAtC mapping classified lung parenchyma into three areas: Normal, functional air trapping (fAT), and emphysema (Emph). We defined fAT as the area with a density change of less than 60 Hounsfield units (HU) between inspiration and expiration CTs among areas with a density less than -856 HU on inspiration CT. The volume fraction of each area was compared with clinical parameters and pulmonary function tests (PFTs). The results were compared with those of parametric response mapping (PRM) analysis. Results: The relative volumes of the EAtC classes differed according to the Global Initiative for Chronic Obstructive Lung Disease stages (p < 0.001). Each class showed moderate correlations with forced expiratory volume in 1 second (FEV₁) and FEV₁/forced vital capacity (FVC) (r = -0.659-0.674, p < 0.001). Both fAT and Emph were significant predictors of FEV₁ and FEV₁/FVC (R² = 0.352 and 0.488, respectively; p < 0.001). fAT was a significant predictor of mean forced expiratory flow between 25% and 75% and residual volume/total vital capacity (R² = 0.264 and 0.233, respectively; p < 0.001), while Emph and age were significant predictors of carbon monoxide diffusing capacity (R² = 0.303; p < 0.001). fAT showed better correlations with PFTs than with small-airway disease on PRM. Conclusion: The proposed quantitative CT EAtC mapping provides comprehensive lung functional information on each disease component of COPD, which may serve as an imaging biomarker of lung function.

• 대한본초학회지
• /
• 제21권2호
• /
• pp.151-158
• /
• 2006

Objectives : The purpose of the present study is to observe the neuroprotective effect of the $NeuBo153^{\circledR}$ on transient focal cerebral ischemia in rats. Methods : $NeuBo153^{\circledR}$ was made by mixing the herbs, mainly the root of Panax ginseng, the root of Rehmannia glutinosa and Poria cocos, the stem bark of Acanthopanax senticosus, the root of Scutellaria baicalensis and Mel, and heating for 96 hours. Transient Focal cerebral ischemia (2 h of ischemia, 22 h of reperfusion) was induced by intraluminal suture method with SD rats. Sensory motor function was tested by rotarod test, prehensile traction test, beam balance test and foot fault test at 24 h after ischemia. The brain slices were stained by 2% 2, 3, 5-triphenyltetrazolium chloride and the infarct volume was measured by graphic analyzer at 24 h after ischemia. Results : $NeuBo153^{\circledR}$ treated group did not show significant differences compared with vehicle treated group in body temperature. Oral administration of $NeuBo153^{\circledR}$ reduced brain infarct volume by 29.7% compared with vehicle treated group. $NeuBo153^{\circledR}$ also showed protective effects on sensory motor functional deficits. Conclusion : $NeuBo153^{\circledR}$ treatment reduced brain damage and improved functional deficits induced by MCAo. It showed neuroprotective effects even when treatment was relayed 2 h after injury. Further research is required to evaluating long term functional recovery am accurate therapeutic range and mechanisms.

• 대한전자공학회논문지SD
• /
• 제38권1호
• /
• pp.13-22
• /
• 2001

본 논문에서는 RF 회로의 3차원 적층 구조를 설계하고 RF 회로의 특성개선 효과를 살펴보았다. 3차원적 RF 회로를 구현하기 위하여 분할 설계 기준을 제안하였으며 이에 따라 RF 회로를 기능별, 동작 주파수별로 분할하여 구현하였다. 분할된 하위 모듈을 3차원으로 적층 연결할 수 있도록 PAA 입출력 단자구조를 이용하여 3차원 형태의 ITS RF 시스템을 제작하였다. 이에 따라 아날로그 신호와 디지털 신호, DC 전원이 혼재되어 있는 ITS(지능형 교통관제 시스템) 224MHz RF 모듈을 구성되는 회로를 특성 임피던스 정합과 시스템의 동작 안정도를 고려하여, 기능별로는 송신부, 수신부, PLL(Phase Locked Loop)부, 전원부로 분할하였고 주파수별로는 224MHz, 21.4MHz, 및 450kHz~DC의 주파수 대역으로 분할하여 설계하였다. RF 회로 모듈을 구현하는 과정에서 224MHz 대역에서 동작하는 송신부와 수신부 증폭회로는 설계치와 일치하는 18.9㏈, 23.9㏈의 이득, PLL부와 전원부는 위상 고정, 정전원 입력의 동작특성을 최대화시킬 수 있었다. 3차원 구조의 RF 모듈은 2차원의 평면구조의 단일 기판 구성방법과 비교하여 부피 및 배선길이에서 각각 76.9％, 28.4％를 감소시킨 $48cm^3$, 1.8cm를 나타내었고, 열적 성분인 최고 동작 온도특성은 37% 감소한 $41.8^{\circ}C$를 나타났다. PAA형 3차원 적층 구조는 고속 고밀도 저전력의 특성을 가지며, 저비용으로 구현할 수 있으며 RF 주파수 영역에서 각 모듈을 기능별, 주파수별로 모듈화해 제품의 기능을 가변적으로 변화시켜줄 수 있음을 알 수 있었고, RAA 형태의 입출력 단자로 연결함으로써 단일 양면 기판으로 구현되던 2차원적 RF 회로 모듈의 부피와 전기적 동작 특성과 열적 특성을 개선시킬 수 있었다.

• Korean Journal of Radiology
• /
• 제22권8호
• /
• pp.1253-1265
• /
• 2021

Objective: To investigate the prognostic value of preoperative cardiac magnetic resonance imaging (MRI) for long-term major adverse cardiac and cerebrovascular events (MACCEs) in patients undergoing tricuspid valve (TV) surgery for functional tricuspid regurgitation (TR). Materials and Methods: The preoperative cardiac MR images, New York Heart Association functional class, comorbidities, and clinical events of 78 patients (median [interquartile range], 59 [51-66.3] years, 28.2% male) who underwent TV surgery for functional TR were comprehensively reviewed. Cox proportional hazards analyses were performed to assess the associations of clinical and imaging parameters with MACCEs and all-cause mortality. Results: For the median follow-up duration of 5.4 years (interquartile range, 1.2-6.6), MACCEs and all-cause mortality were 51.3% and 23.1%, respectively. The right ventricular (RV) end-systolic volume index (ESVI) and the systolic RV mass index (RVMI) were higher in patients with MACCEs than those without them (77 vs. 68 mL/m², p = 0.048; 23.5 vs. 18.0%, p = 0.011, respectively). A high RV ESVI was associated with all-cause mortality (hazard ratio [HR] per value of 10 higher ESVI = 1.10, p = 0.03). A high RVMI was also associated with all-cause mortality (HR per increase of 5 mL/m² RVMI = 1.75, p < 0.001). After adjusting for age and sex, only RVMI remained a significant predictor of MACCEs and all-cause mortality (p < 0.05 for both). After adjusting for multiple clinical variables, RVMI remained significantly associated with all-cause mortality (p = 0.005). Conclusion: RVMI measured on preoperative cardiac MRI was an independent predictor of long-term outcomes in patients who underwent TV surgery for functional TR.

• 한국식품영양학회지
• /
• 제20권4호
• /
• pp.399-405
• /
• 2007

The quality characteristics of breads made by adding levels of 30%, 60%, and 100% aloe gel were investigated. The 60% aloe gel sample had a larger dough volume than the control dough. Also, the loaf volume and specific volume of the bread made with 60% aloe gel were larger than those of the control bread. The pasting temperature increased gradually with the increasing amounts of substituted aloe gel as compared to wheat flour with water added$(66.5{\pm}12^{\circ}C)$; the wheat flour with 100% aloe gel had a pasting temperature of $90.7{\pm}1.1^{\circ}C$. Peak viscosity decreased gradually with increasing amounts of aloe gel when compared to the wheat flour with water added. Setback also was decreased gradually with the increasing amounts of aloe gel as compared to the wheat flour with added water. From the setback decrease it is suggested that the aloe controlled retrogradation of the bread during short-term storage. The crumb color of the bread made with the aloe gel was not significantly different to that of the control bread, and the color of the crumb was yellow-white. Bread hardness decreased gradually with increasing amounts of the substituted aloe gel. However, bread gumminess and chewiness increased gradually with increasing amounts of aloe gel. The springiness of the bread made with 100% aloe gel was lower than that of the control bread. With regard to flavor and taste, the bread made with 100% aloe gel produced a green-like odor and had a bitter taste. The mouth feel of the breads made with aloe gel was considered soft and moist. The overall acceptabilities of the breads made with 30% and 60% aloe gel were not significantly different from the control bread, but the bread made with 100% aloe gel had a green smell and bitter taste. Yet accordingly, the results indicate that functional and health products with improved quality could be developed by adding aloe gel to breads and cakes.

• Journal of Periodontal and Implant Science
• /
• 제48권2호
• /
• pp.124-134
• /
• 2018

Purpose: Clinicians must examine tooth wear to make a proper diagnosis. However, qualitative methosds of measuring tooth wear have many disadvantages. Therefore, this study aimed to develop and evaluate quantitative parameters using the cusp area and volume of virtual dental models. Methods: The subjects of this study were the same virtual models that were used in our former study. The same age group classification and new tooth wear index (NTWI) scoring system were also reused. A virtual occlusal plane was generated with the highest cusp points and lowered vertically from 0.2 to 0.8 mm to create offset planes. The area and volume of each cusp was then measured and added together. In addition to the former analysis, the differential features of each cusp were analyzed. Results: The scores of the new parameters differentiated the age and NTWI groups better than those analyzed in the former study. The Spearman ${\rho}$ coefficients between the total area and the area of each cusp also showed higher scores at the levels of 0.6 mm (0.6A) and 0.8A. The mesiolingual cusp (MLC) showed a statistically significant difference (P<0.01) from the other cusps in the paired t-test. Additionally, the MLC exhibited the highest percentage of change at 0.6A in some age and NTWI groups. Regarding the age groups, the MLC showed the highest score in groups 1 and 2. For the NTWI groups, the MLC was not significantly different in groups 3 and 4. These results support the proposal that the lingual cusp exhibits rapid wear because it serves as a functional cusp. Conclusions: Although this study has limitations due to its cross-sectional nature, it suggests better quantitative parameters and analytical tools for the characteristics of cusp wear.

• 천문학회보
• /
• 제46권1호
• /
• pp.39.1-39.1
• /
• 2021

The Local Volume Mapper(LVM) project in the fifth iteration of the Sloan Digital Sky Survey (SDSS-V) will produce large integral-field spectroscopic survey data to understand the physical conditions of the interstellar medium in the Milky Way, the Magellanic Clouds, and other local-volume galaxies. We are developing the LVM Instrument control software. The architecture design of the software follows a hierarchical structure in which the high-level software packages interact with the low-level and mid-level software and hardware components. We adopt the spiral software development model in which the software evolves by iteration of sequential processes, i.e., software requirement analysis, design, code generation, and testing. This spiral model ensures that even after being commissioned, the software can be revised according to new operational requirements. We designed the software by using the Unified Modeling Language, which can visualize functional interactions in structure diagrams. We plan to use the SDSS software framework CLU for the interaction between components, based on the RabbitMQ that implemented the Advanced Message Queuing Protocol (AMQP).