• Geomechanics and Engineering
• /
• v.25 no.2
• /
• pp.89-98
• /
• 2021

The paper presents an experimental study on the strength behaviour of a coral gravelly sand from Vietnam subjected to monotonic and cyclic loading. A series of direct shear tests were carried out to investigate the shear strength behaviour and the factors affecting the shear strength of the sand such as relative density, cyclic load, amplitude of the cyclic load and loading rate. The study results indicate that the shear strength parameters of the coral gravelly sand include not only internal friction angle but also apparent cohesion. These parameters vary with the relative density, cyclic load, the amplitude of the cyclic load and loading rate. The shear strength increases with the increase of the relative density. The shear strength increases after subjecting to cyclic loading. The amplitude of the cyclic load affects the shear strength of coral gravelly sand, the shear strength increases as the amplitude of the cyclic load increases. The loading rate has insignificantly effect on the shear strength of the coral gravelly sand.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.23-37
• /
• 2005

The factors affecting the long-term design strength of geogrid can be classified into factors on creep deformation, installation damage, temperature, chemical degradation and biological degradation. Especially, creep deformation and installation damage are considered as main factors to determine the long-term design strength of geogrid. Current practice in the design of a reinforced soil structures is to calculate the long-term design strength of a geosynthetic reinforcement damaged during installation by multiplying the two partial safety factors, $RF_{ID}$ and $RF_{CR}$. This method assumes that there is no evaluation of synergy effect between installation damage and creep deformation of geogrids. This paper describes the results of a series of experimental study, which are carried out to assess the combined effect of the installation damage and the creep deformation for the long-term design strength of geogrid reinforcements. A series of field tests was carried out to assess installation damage of various geogrids with respect to different fill materials, and then creep tests are conducted to evaluate the creep deformation of both undamaged and damaged geogrids. The results indicated that the tensile strength reduction factors, RF, considering the combined effect between the installation damage and the creep deformation is less than that calculated by the current design method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.228-236
• /
• 2014

The purpose of this study among university students is to analyze difference of their character strengths by life satisfaction and to indicate the primary factors of character strength that affect life satisfaction. The study has shown that among 24 character strength factors, only kindness, self-control, hope, optimism and humor lead to life dissatisfaction, and the other factors lead to higher satisfaction. According to the primary factors of character strengths that affect life satisfaction, love, fairness, appreciation and spirituality affect life satisfaction similarly. In addition, love and humor is directly related to it while spirituality, appreciation and fairness are indirectly related. Moreover, the primary factors of life satisfaction in order are love, humor, spirituality, appreciation and fairness.

• Journal of the Korean Home Economics Association
• /
• v.44 no.3 s.217
• /
• pp.51-59
• /
• 2006

The purpose of this study is to determine the relevant variables of parent-leadership that influence family strength based on the transformational leadership and transactional leadership proposed by Bernard M. Bass and to investigate the primary impact of leadership on the subordinate's job satisfaction and job involvement to his/her supervisor. Therefore, this study will provide implications for the family through a diagnosis of the effect by leadership. The results of this research are as follows : 1) How is the relationship of parent-leadership and family strength? A positive correlation was found between transformational leadership scores and family strength. A negative correlation was found between nontransactional leadership scores and family strength. 2) How had transformational leadership and transactional leadership affected on the family strength? Transformational leadership had the strongest effect on family strength. How had the 7 sub- factors of transformational/transactional leadership affected family strength? Idealized influence and contingent reward had strong effect on family strength but management by except had a negative effect on family strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3296-3301
• /
• 2009

The results of PCPT(Pezocone Penetration Test) are widely used for the estimation of the undrained shear strength, for which the empirical cone factors($N_{kt}$, $N_{ke}$, $N_{{\Delta}u}$) need to be obtained at each site. In this study, the cone factors were estimated, for the soils at Bookmyun area in Changwon city, using the undrained shear strengths from the unconfined and UU triaxial compression tests. The parametric studies with plastic index and pore water pressure ratio were performed as well. $N_{kt}$, $N_{ke}$ and $N_{{\Delta}u}$ were estimated in the ranges of 8~40, 7~37, and 1~26 respectively. It was observed that there is a relationship between the cone factors, specially $N_{{\Delta}u}$, and the pore pressure ratio.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.202-210
• /
• 2009

This study was carried out to identify the factors which correlated with upper limb function after stroke and to analyze the effect of related factors on upper limb function. The 100 stroke patients(MMSE-K>24) were participated. The upper limb function according to gender, hand dominance, stroke type, affected location, site of paralysis, speech disorder showed no significant difference, and show significant difference according to shoulder subluxation. The upper limb muscle strength(Manual Muscle Testing), proprioception, muscle tone(Modified Ashworth Scale), grip strength(Dynamometer), paint (Visual Analog Scale) showed significant correlations with upper limb function. These predictors explained 77.6% of the upper limb function and the most significant affecting factor of upper limb function was upper limb muscle strength. In conclusion, the upper limb muscle strengthening will be effective strategy to improving the upper limb function and considering the proprioception, muscle tone, grip strength, pain, subluxation will be helpful to develop the strategies.

• Ocean and Polar Research
• /
• v.25 no.spc3
• /
• pp.353-360
• /
• 2003

Estimation of undrained shear strength $(S_u)$ of clayey soils from piezocone penetration test (CPTu), which has widely been known as one of very promising in situ test methods, requires piezocone factors. Empirical correlations are generally utilized to derive piezocone factors, but previous studies on the empirical piezocone factors are site-specific and in some cases need engineering characteristics, which should be obtained from additional laboratory tests. In this study, empirical cone factors were evaluated by comparing 6 CPTu results at Shihwa region in Korea with reference $S_u$ values obtained from field vane test (FVT). From previous CPTu results of other regions in Korea as well as the results herein, the correlations between piezocone factor, $N_{kT}$ and CPTu results were investigated and three simplified evaluation methods of $S_u$ using only CPTu results were presented. The $S_u$ values estimated by $(q_T-{\sigma}_v)/{\sigma}'_v$ method shows better matches with those obtained from laboratory tests for marine clays at Shihwa region.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.293-298
• /
• 1995

The strength of shear connectors embedded in lightweight concrete slab with deck plate is influenced by various factors of deck plate, shear conncetor and concrete. Generally, it is reported that the strength of shear connector in lightweight concrete decreases in comparison with that in normal concrete. So this paper is to use compressive strength of lilghtweight concrete, width-height ratio of deck plate, and cross sectional area of shear conncetor as variables, to evaluate the strength of shear conncetors in composite beam of steel and lilghtweight concrete slabs with deck plate, and then to suggest the reasonable strength equation by comparing the push-out test results with establixhed strength formula. As the result of 24 specimens test, in case of lightweight concrete slab with deck plate, it has showed that in the same strength, the strength of shear connector decreased about 10~20% in comparison with that in normal concrete. In spite of lightweight concrete, the test results were closely approached the established strength formula of shear connector using Fisher's reduction coefficient.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.317-326
• /
• 2021

This study was investigated to identify the factors influencing health related quality of life in older women with low muscle strength in Korea. The study design was a cross sectional study based on 7th Korea National Health and Nutrition Examination Survey data and the data were analyzed using the SPSS 26.0 program. The level of Health related Quality of Life(HRQoL) in older women with low muscle strength was 0.84. There were significant differences on HRQoL according to age, education level, perceived health, aerobic exercise, perceived stress, arthritis, osteoporosis and depression. The risk factors of HRQoL in older women with low muscle strength were age, education level, perceived health, perceived stress, aerobic exercise and arthritis. Based on this results to improve HRQoL, physical activity intervention should be developed to improve muscle strength and to manage arthritis in older women.