• Cross-Cultural Studies
• /
• v.25
• /
• pp.743-773
• /
• 2011

In this research, the writer has done a comparative analysis of 4,791 trisyllabic modern Chinese vocabularies from "a dictionary for trisyllabic modern Chinese word" and the corresponding Korean words written in Chinese characters out of 170,000 vocabularies hereupon that are collected in "new age new Korean dictionar y". Aa a result, we have the total 407 pairs of corresponding group with the following 3 types: 1) Chinese : Korean 3(2) : 3 syllable Chinese characters with completely same form-morpheme and same meaning, use, class (376pairs, 92.38% of 407), 2) Chinese : Korean 3 : 3 syllable Chinese characters with completely same form-morpheme and partly same meaning, use, class (18pairs, 4.42% of 407), 3)Chinese : Korean 3 : 3 syllable Chinese characters with completely same form-morpheme and different meaning, use, class (13pairs, 3.19% of 407).

• Cross-Cultural Studies
• /
• v.30
• /
• pp.187-222
• /
• 2013

In this study, From 1,560 entry-level of TOPIK standard vocabularies are 702 Sino-Korean words selected which account for 45% of the whole vocabularies in TOPIK. In addition, the same form and morpheme words in Sino-Korean are sorted out by comparing them with 5,000 words of the NEW HSK vocabularies in Sino-Korean morpheme, array position of morpheme, meaning, and usage. Those are categorized into three parts : type of completely the same form-morpheme and same meaning, use, class(189 pairs), type of completely the same form-morpheme and partly same meaning, use, class(28 pairs), and type of completely the same form-morpheme and different meaning, use, class(10 pairs). The first type of words that account for 83.26% of them are used in exactly the same way in both Chinese and Korean. Through an accurate understanding of these vocabularies could either Chinese-speaking Korean learners or Korean-speaking Chinese learners apply those words in their mother tongue to the acquisition of the target language and get more effective means of learning methods for language proficiency test.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.739-742
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of If as to made condition the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph. In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12. 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. the smaller of off time, the mailer of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.567-572
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of IP as to made condition, the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph, In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12, 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. The smaller of off time, the maller of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph, hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.21-31
• /
• 2012

The purpose of this study is to find the influence of Chinese falling-rising tone on the pitch pattern of corresponding partly-different-form-same-meaning Sino-Korean words delivered by Chinese learners of Korean and to examine how the falling-rising tone of corresponding Chinese words affects the pitch patterns of Sino-Korean words. The scope of this research is limited to Chinese learners of Korean, especially on two groups of Sino-Korean words - AB:CB type and AB:AC type that the are second-most frequently occuring different-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. Learners' pitch patterns were recorded and analyzed using software and compared with the tone of corresponding Chinese words. Experimental results showed that AB:CB type Sino-Korean words were not affected by Chinese 'falling-rising tone - high and level tone'. As well as AB:CB type, experimental results showed there were no significant influence on the pitch pattern of AB:AC type Sino-Korean words by Chinese falling-rising tone. But it was clear that Chinese learners' made pitch errors on both AB:CB type and AB:AC type Sino-Korean words. In conclusion, the Chinese learners' pitch patterns of partly-different-form-same-meaning Sino-Korean words are different from Korean native speakers', but their pitch errors cannot be attributed to Chinese falling-rising tone.

• Journal of the Korean Society for information Management
• /
• v.35 no.3
• /
• pp.147-164
• /
• 2018

This study defined the name of records producing institution as the unique preferred form of access point which has same identification and same entity by using Standard Administration Code, and also described the name of records producing institution which has various name form as formal-name form of access point, which has same identification and same entity. This study make us be able to identify and access to all of the records that institution, has same identification and same entity, has produced. And the mechanic, I designed by ontology would make reinforce 'the principle of provenance' and 'respect for orignal order' and make user satisfy in useability of archives and expanded retrieval results.

• The Korean Journal of Ecology
• /
• v.20 no.5
• /
• pp.339-345
• /
• 1997

The Arisaema robustum, perennial non-stem herb, population in the temperate forest of Sanseong-ri, Joongbu-myeon, Kyonggi Province was studied for leaf pattern and leaf growth from 1993 to 1995. The area of each side leaflet was larger than that of the apical leaflet in 3-leaflet form plants. But there was no significant difference among the leaflets (apical, 1st side and 2nd side leaflet) in t-testing of the 5-leaflet form plants. The specific leaf area (SLA) of the 3-leaflet form plant was greater than that of the 5-leaflet form plant, and the difference was significant at 0.1%. But differences of SLA value among the leafleats of the same leaflet form plants were minor. The area of leaflets or total leaf area was inversely proportioned to the their SLA values. Especially, the correlation coefficients (CC) between leaf area and SLA in apical leaflets and side leaflets of the 3-leaflet form plant compared to the 1st side leaflets of the 5-leaflet form plants were significant at the level of 1%. The differences between two sides in the dry weight and area of leaflets starting from the apical leaflets were about 5%. The CC values between attributes of the petiole (length and dry weight) and those of leaf blades (dry weight, leaf area and SLA) were high and significant at a 1% level. Especially, The CC value between the dry weight of the petioles and that of the leaf blades was higher than any others (r=0.952). The morphologies of the leaf margins were entire, medium serrate and serrate, and the same plant showed the same type from year to year. The plants usually had one leaf and occasionally 2 leaves. 1-leaf plants usually had 3 or 5 leaflets and occasionally 2 or 4 leaflets. Each year, the ration of individuals having the same number of leaflets was 72%, and that of individuals having a different number of leaflets was 27.54% (an increase of 20.4% and a decrease of 7.1% respectively). In the individuals increasing in the number of leaflets, the ration of individuals shifting from the 3-leaflet from to the 5-leaflet form was 14%. The increase ration of leaf area per individual a year was 37%, and the increase ratios of the plants increasing in leaflets were 60-70% regardiness of leaflet increase. The ratios of leaflet length/breadth were about 1-2, and the variations of those were 0.182-0.286 each year (12-20%).

• 한국가시화정보학회:학술대회논문집
• /
• 2001.12a
• /
• pp.62-74
• /
• 2001

Present paper describes the principles of PIV measurement approaching from the analytical view, which enables to explain the general form of principles covering all the PIV measurement, and that gives theoretical basis for its higher measurement performances. The explanation of the measurement principles started from the definition of governing equation in differential form as same as the gradient method, and the integral along the particle path line was executed to show the principle of the correlation method with same basis. The integral processes clearly shows the analytical reason why the correlation peak gives the terminal point of path line, and how the effects of deformation and rotation of fluid appears in the correlation map. These results have no differences from our experiences and understandings of the conventional PIV measurement definition in final form. However, the analytical approach enable to understand those facts a priori, and it makes easy to achieve the innovative higher performances of measurement. Analytical explanation clearly shows the behavior of the residual errors caused by the fluid motion, and it enables to analyze the measurement uncertainty theoretically.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.2
• /
• pp.65-71
• /
• 2001

The step response of the Manabe standard form[2] has little overshoot and show almost same waveforms regardless of the order of the characteristic polynomials. In some situations it is difficult to control the rise time and settling time simultaneously of the step response of the Manabe standard form To control its rise time and settling time efficiently, We develop the Manabe standard form: We try to find out the SRFS(Slow Rise time & Fast Setting time) form which has the slower rise time and faster settling time than those fo the Manabe standard form. We also consider the other three forms: FRSS(Fast Rise time & Slow Settling time), SRFS(Slow Rise time & Fast Settling time) and SRSS(Slow Rise time & Slow Settling time) forms. In this paper, by using the evolutionary strategy, we obtain all the coefficient of the four forms we mention above. Finally, we design a controller for a given plant so that the overall system has the performance that the rise time is faster, the settling time is faster than those of the Manabe standard form.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.57-64
• /
• 2004

The objective of this study is to suggest the form rolling technology to produce high precision worm on the base of three dimensional finite element simulation and experiment. It is important to determine the initial workpiece diameter in form rolling because it affects the quality of tooth profile. The calculation method of the initial workpiece diameter in form rolling is suggested and it is verified by finite element simulation. The form rolling processes of worm shaft used as automotive part using both the rack dies of counter flow type and the roll dies are considered and simulated with the same numerical model as actual process by the commercial finite element code, BEFORM-3D. Deformation modes of workpiece between the form rolling by the rack dies of counter flow type and the roll dies are investigated from the result of simulation. The experiments using rack dies and roll dies are performed under the same conditions as those of simulation. The surface roughness, the straightness and the profile of worm are measured precisely using the worm shafts obtained from experiment. The results of simulation and experiment in this study show that the form rolling process of worn shaft using the rack dies is decidedly superior to that using roll dies from the aspect of the precision of worm such as the surface roughness, the straightness and the profile of worm.