• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.127-147
• /
• 2016

This study proposes the improvement scheme of the current lease rate assessment system (2003~2014), as a major problem solving area, for the Terminal Operating Company (TOC)'s wharf since the introduction of the TOC system in 1997. The study considers the reform system using three criteria: standardization, simplification, and fairness. The final alternative presented by the study adopts the lease rate assessment system, which newly reflects changes of facilities' property values for aprons, combining it with the related fees of the Korean seaport dues for open storage yards, warehouses (shed), passages, buildings and lands within leased facilities. The proposal anticipates that the new system will not only minimize stakeholders' confusion, but also resolve the main problems within the current system. The study, further, introduces the adjustment ratio, which will make the new lease rate of the apron equal to the current lease rate of a berth, for the individual TOC's wharf, in order to prevent a sharp increment in the lease rate of the apron. This is because the government or port authorities as lessors, need to give priority to lightening the burden of TOC's costs under the deteriorating business environment such as the slowdown in port throughputs' growth. This study makes a contribution by suggesting a new lease rate assessment system for the TOC's wharf, reflecting the value of property as well as leading to its simplification and standardization. Additionally, it may lead to the improvement of fairness by applying the same rate to all leased wharfs for the lease rates of open storage yards, warehouses (shed) and passages. However, it has a limitation that hinders the fairness: the lease rate for the apron cannot be imposed in proportion to the leased area, by applying the individual adjustment ratios. In the future, those adjustment ratios should be, gradually, rationalized to be the same target ratio (0.5) for each wharf, following an improvement in the terminal operating business environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.433-433
• /
• 2012

As the requirement in patterning geometry continuously shrinks down, the termination of etch process at the exact time became crucial for the success in nano patterning technology. By virtue of real-time optical emission spectroscopy (OES), etch end point detection (EPD) technique continuously develops; however, it also faced with difficulty in low open ratio etching, typically in self aligned contact (SAC) and one cylinder contact (OCS), because of very small amount of optical emission from by-product gas species in the bulk plasma glow discharge. In developing etching process, one may observe that coupon test is being performed. It consumes costs and time for preparing the patterned sample wafers every test in priority, so the coupon wafer test instead of the whole patterned wafer is beneficial for testing and developing etch process condition. We also can observe that etch open area is varied with the number of coupons on a dummy wafer. However, this can be a misleading in OES study. If the coupon wafer test are monitored using OES, we can conjecture the endpoint by experienced method, but considering by data, the materials for residual area by being etched open area are needed to consider. In this research, we compare and analysis the OES data for coupon wafer test results for monitoring about the conditions that the areas except the patterns on the coupon wafers for real-time process monitoring. In this research, we compared two cases, first one is etching the coupon wafers attached on the carrier wafer that is covered by the photoresist, and other case is etching the coupon wafers on the chuck. For comparing the emission intensity, we chose the four chemical species (SiF2, N2, CO, CN), and for comparing the etched profile, measured by scanning electron microscope (SEM). In addition, we adopted the Dynamic Time Warping (DTW) algorithm for analyzing the chose OES data patterns, and analysis the covariance and coefficient for statistical method. After the result, coupon wafers are over-etched for without carrier wafer groups, while with carrier wafer groups are under-etched. And the CN emission intensity has significant difference compare with OES raw data. Based on these results, it necessary to reasonable analysis of the OES data to adopt the pre-data processing and algorithms, and the result will influence the reliability for relation of coupon wafer test and whole wafer test.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2003.05a
• /
• pp.74-77
• /
• 2003

After the Enforcement of Price Deregulation of Apartment, Apartment house get down to originality goods, The Housing Market have reorganized the nucleus by a user, have demanding the development for discriminative unit plan. The purpose of this study is that before and after the Price Decontrol of Apartment take part a variety of unit plan, search for transformation factor and analyze into the tendency of the distinction plan of Housing Goods. Before and after the Price Decontrol of Apartment, Apartment unit have analyzed from 85 $m^2$ till 152 $m^2$ private area; ten corporations of civil construction' unit in Seoul and The national capital region supply apartment, will supply apartment. For selected examples, first, unit plan is normalized from the ratio of front to side wall, bay, a Room' organization and a kind of Room, number, and for examples of unit plan of apartment, the examples were analyzed with respect to change of a Room' organization and the number of a room and the ratio of front wall to side wall for item investigated. Finally, I search out course of transformation tendency of an apartment unit plan after Enforcement of Price Deregulation and analyzed a factor. The results of the study are follows, after Enforcement of Price Deregulation, unit plan of apartment lead to change lay out, to secure each family's privacy, to secure feeling for open hearted, tendency of flexibility.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.6
• /
• pp.416-423
• /
• 2023

Recently, the design point of the propeller is gradually changing due to the demand for energy saving and environmental protection. Until recently, self-propulsion model tests were conducted using stock propellers and geometry information was provided to propeller designers, but the range of existing stock propellers did not keep up with the changing design points, and the range of series propellers required in the initial design was also insufficient. Future propeller performance requires high performance and eco-friendliness, and the need for expansion of series propellers has increased. In order to respond to future needs and provide a wide range of advantages in propeller design, KRISO manufactures about 100 series propellers and builds series data through a model tests. In this paper, the approach method for deriving the representative optimal shape to be applied to the 4-blade series propeller in the initial stage of series propeller development was summarized.

• Journal of Family Resource Management and Policy Review
• /
• v.13 no.1
• /
• pp.61-81
• /
• 2009

The purpose of this study was to investigate the policy demands of the family sector for work-family balance, with a focus on the child care and household labor provisions. For empirical analysis, data were collected from 197 dual-income families with at least one young child under age 10 in the metropolitan area via self-administered questionnaires. The major findings of this study were as follows. First, child care provisions for working mothers and fathers were insufficient and unfair, and the ratio of child care provisions offered by familial child care network was high. The characteristics of child care provisions for working parents were associated with family structure, working conditions, and demographic variables. Second, household labor provisions for working mothers and fathers were also insufficient and unfair, and the ratio of socialization was high. Third, the level of family satisfaction varied by the level of child care and household labor provisions, respectively, controlling family structure, working conditions, and demographic variables. The empirical results of the study provided policy implications for work-family balance.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.6
• /
• pp.619-625
• /
• 2008

Urban sewer systems are designed to operate in open-channel flow regime and energy loss at square manholes is usually not significant. However, the energy loss at surcharged manholes is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharged flow. Hydraulic experimental apparatus which can change the manhole inner profile(CASE I, II, III, and IV) and the invert types(CASE A, B, C) were installed for this study. The experimental discharge was $16{\ell}/sec$. As the ratio of b/D(manhole width/inflow pipe diameter) increases, head loss coefficient increases due to strong horizontal swirl motion. The head loss coefficients for CASE I, II, III, and IV were 0.46, 0.38, 0.28 and 0.37, respectively. Side covers increase considerably drainage capacity at surcharged square manhole when the ratio of d/D(side cover diameter/inflow pipe diameter) was 1.0. The head loss coefficients for CASE A, B, and C were 0.45, 0.37, and 0.30, respectively. Accordingly, U-invert is the most effective for energy loss reduction at surcharged square manhole. This head loss coefficients could be available to evaluate the urban sewer system with surcharged flow.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.3
• /
• pp.1-11
• /
• 2013

This study investigated Chinese Laws on the kind of urban green spaces and the legal requirements for the green spaces of urban habitat and analyzed the specificities of them intending to provide basic data to suggest bringing in or not the relevant Chinese Laws to Korea. This study can be summarized as follows: First, the concept of Chinese urban green spaces(g.s.) classified by 5 kinds(park g.s., production g.s., protection g.s., attachment g.s., the others g.s.) placed the park and green spaces in the same category unlike the Korean urban green spaces that only distinguishes between park and green spaces. The Chinese Urban Park is classified by 4 kinds(composite park, community park, special park, linear park) at the 'Standard for urban green spaces classification' which is below in rank of the legal system. Second, in case of calculation for green spaces ratio of urban green spaces in China, the green rooftop landscaping area should not be included as a green spaces area except the rooftop of a basement or semi basement building to which residents have easy access. The green spaces requirements and compulsory secure ratio by 3 habitat kinds(habitat, small habit, minimum habitat) of when to act as a residential plan is regulated. Third, the green spaces system is obligated to establish at habitat green spaces plan and is specified to conserve and improve existing trees and green spaces. The green spaces ratio on reconstruction for old habitat is relaxed to be lower than for new habitat and a gradient of green spaces is peculiarly clarified. The details and requirements for establishment and the minimum area intending for each classes of the central green spaces(habitat park, children park, minimum habitat's green spaces) are regulated. Especially at a garden style of minimum habitat's green spaces, intervals between the south and north houses and a compulsory security for green spaces area classifying into two groups(closing type green spaces and open type green spaces) by a middle-rise or high-rise building are clarified. System of calculation for green spaces area is presented at a special regulation. Fourth, a general index(area/person) of public green spaces within habitat to achieve by 3 habitat kinds is determined, in this case, the index on reconstruction for a deterioration zone can be relaxed to be lower to the extent of a specified quantity. A location and scale, minimum width and minimum area per place of public green spaces are regulated. A space plot principle including adjacent to a road, greening area ratio against total area, security of open space and the shadow line boundary of sunshine are also regulated to intend for public green spaces. Fifth, the minimum horizontal distance between the underground cables and the surrounding greening trees are regulated as the considerable items for green spaces when setting up the underground cables. The principle to establish green spaces within public service facilities is regulated according to the kind of service contents. It shall be examined in order to import or not the special regulations that only exist in Chinese Laws but not in Korean Laws. The result of this study will contribute to gain the domestic landscape architect's' sympathy of the research related to Chinese urban green spaces laws requiring immediate attention and will be a good chance to advance into the internationalization of Korean Landscape Architectural Laws.

• Journal of Ecology and Environment
• /
• v.31 no.4
• /
• pp.261-267
• /
• 2008

Growth and photosynthetic responses of one $C_3$ and two $C_4$ plants in the family Chenopodiaceae in three $CO_2$ concentration $([CO_2])$ conditions-low (about $243{\mu}mol\;mol^{-1}$, LC), present (about 378, PC), and high (about 465, HC)-were investigated in open top chambers. The relative growth rate (RGR) and net assimilation rate in the $C_3$ plant, Chenopodium album, increased with increasing $[CO_2]$, though the RGR was not enhanced significantly in the HC condition. The leaf area ratio and leaf weight ratio of the $C_3$ plant drastically decreased with increasing $[CO_2]$, suggesting that the $C_3$ plant invests more biomass to leaves in lower $[CO_2]$ conditions. The two $C_4$ plants, Atriplex glauca and A. lentiformis, showed relatively small changes in those growth parameters. These photosynthetic-pathway-dependent responses suggest that growth patterns of $C_3$ and $C_4$ plants have been altered by past increases in atmospheric $[CO_2]$ but that there will be relatively little further alteration in the future high-$CO_2$ world.

• Human Ecology Research
• /
• v.61 no.4
• /
• pp.543-563
• /
• 2023

The purpose of this study is to design and develop a Metaverse ZEP platform-based teaching and learning process plan by selecting learning topics that are commonly dealt with among the core concepts of the "family" area of practical (technical and home) subjects. To this end, a teaching and learning process plan was developed through planning, Metaverse platform design, expert review, and revision stages. The Metaverse ZEP "Open Class Day" platform, a virtual learning space, was created and developed to further utilize EduTech programs, such as Padlet, Mentimeter, Jamboard, Miricanvas, and Spatial. The teaching and learning process plan developed in this study consists of a total of seven sessions, including approaching EduTech, Changing Families, Exploring Our Family, and Counseling Centers 1, 2, and 3. Among them, Geumji Counseling Center 1, 2, and 3 was designed as a class in which parents and children participate together in open classes using the ZEP platform. This platform can be used as part of parent classes as well as to encourage online participation in the open classes held periodically at each individual school. In terms of the content validity ratio (CVR) of the developed teaching and learning process verified through five experts, 12 out of 15 questions had a CVR of 1, while the remaining three questions had a CVR of 0.6. The three questions with lower validity were revised and supplemented.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.293-298
• /
• 2011

The most widely used method to form an electrode in industrial solar cells are screen printing. Screen printing is characterized by a relatively simple and well-known production sequence with high throughput rates. However the method is difficult to implement a fine line width of high-efficiency solar cells can not be made. The open circuit voltage(Voc) and the short circuit current density(Jsc) and fill factor(FF) need to be further improved to increase the efficiency of silicon solar cells. In this study, gravure offset printing method using the multicrystalline-silicon solar cells were fabricated. Gravure off-set printing method which can print the fine line width of finger electrode can have the ability reduce the shaded area and increase the Jsc. Moreover it can make a high aspect ratio thereby series resistance is reduced and FF is increased. Approximately $50{\mu}m$ line width with $35{\mu}m$ height was achieved. The efficiency of gravure off set was 0.7% higher compare to that of scree printing method.