• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.145-150
• /
• 2008

One of the unresolved questions in articular cartilage biomechanics is the magnitude of the dynamic modulus and tissue compressive strains under physiological loading conditions. The objective of this study was to characterize the dynamic modulus and compressive strain magnitudes of bovine articular cartilage at physiological compressive stress level and loading frequency. Four bovine calf shoulder joints (ages 2-4 months) were loaded in Instron testing system under load control, with a load amplitude up to 800 N and loading frequency of 1 Hz, resulting in peak engineering stress amplitude of ${\sim}5.8\;MPa$. The corresponding peak deformation of the articular layer reached ${\sim}27%$ of its thickness. The effective dynamic modulus determined from the slope of stress versus strain curve was ${\sim}23\;MPa$, and the phase angle difference between the applied stress and measured strain which is equivalent to the area of the hystresis loop in the stress-strain response was ${\sim}8.3^{\circ}$. These results are representative of the functional properties of articular cartilage in a physiological loading environment. This study provides novel experimental findings on the physiological strain magnitudes and dynamic modulus achieved in intact articular layers under cyclical loading conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.781-793
• /
• 2010

Recently, owing to the development of ubiquitous sensor network and mobile communication technologies, many studies on healthcare system are being carried out. In this paper, we have designed and implemented a mobile u-Healthcare system based on sensor network. The u-Healthcare system is composed of three components: wireless sensor network at home, healthcare center located at remote site, and gateway which relays sensing physiological signals to healthcare center. In order to measure patient's physiological signal three sensors are used: three channel ECG sensor, pulse oximeter, and blood pressure sensor. Each sensor is mounted on a mote which can send gathered signal to the base node using Zigbee communication protocol. Once the base node receives physiological signal from each sensor, the client in the base node transfers the signal to the healthcare center. The received physiological signal at the healthcare center is analyzed and processed using various algorithms. The processed results are compared to the standard healthcare database and appropriate treatment including dietetics and exercise cure would be sent to the patient as feedback using SMS message or healthcare center web site. Each patient can check and manage one's health state every day using the healthcare system and gain a recovery under the treatments from minor health problems.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.14-20
• /
• 2015

It is important to understand psychological and physiological responses of occupants who seated in a chair in order to shape a comfortable indoor official environment. So it is needed to find out optimal seated conditions. The purpose of this study was to explore optimal condition of seat air conditioning control based on psychological or subjective responses (perceived temperature and comfort sensation) and physiological responses (heartrate variability; HRV). To do this, experimental conditions were designed by the difference of indoor temperature and seat air conditioning temperature. In the experiment 1, seven experimental conditions were designed with one control condition which was not used seat air conditioning system, and six experimental conditions which the difference of indoor temperature and seat air conditioning temperature ($-1^{\circ}C{\sim}-6^{\circ}C$). In the experiment 2, four experimental conditions were designed with one control condition and three experimental conditions ($-3^{\circ}C{\sim}-5^{\circ}C$). In addition, participants' psychological or subjective response was measured by CSV (comfort sensation vote) and PTS (perceived temperature sensitivity) as a psychological or subjective response, and heartrate variability was measured as a physiological response. As a result, in the experiment 1, it was reported that the optimal conditions of seat air conditioning control based on participants' psychological or subjective comfort were from $-3^{\circ}C$ to $-5^{\circ}C$ experimental conditions. In addition, in the experiment 2, it was reported that the optimal condition of seat air conditioning control based on participants' physiological comfort was $-4^{\circ}C$ experimental condition. These results suggested that seat air conditioning could affected to comfort sensation of occupants in an appropriate range, rather than unconditionally.

• Science of Emotion and Sensibility
• /
• v.7 no.3
• /
• pp.27-35
• /
• 2004

This study has investigated a psychological status of optimal and pleasant driving condition by measuring various physiological signals using SCR(skin conductance response), PPG(peripheral plethysmograph), SKT(skin temperature) and HR(heart rate). The physiological response was measured during various simulated driving conditions. We developed a hardware and algorithm to measure and analyze the physiological response. The physiological signals has reflected the level of driver's tension or relaxation as well as the heart rate. The emotional responses of drivers were also measured and analyzed in this experiment. The result of the study can be used to design a system to enhance the driver's emotional satisfaction as well as to monitor the driver's safety and health condition.

• Journal of Korean Biological Nursing Science
• /
• v.10 no.2
• /
• pp.184-193
• /
• 2008

Purpose: Anxiety and depression are the concepts that commonly used as an emotional approach in the nursing researches and most of researches have been used questionnaires as a marker of anxiety and depression. There were few researches using physiological markers in measuring anxiety and depression. Methods: Journals published between 1950 and 2007 that include depression and anxiety measuring through physiological markers were reviewed. Results: As in the case of the hypothlamus-pituitary-adrenal axis system, it appeared that cortisol, epinephrine, and norepinephrine belonged to the category of hormones which were responsive to anxiety and depression. Plasma norepinephrine was a marker of the anxiety whereas plasma cortisol was a marker of the depression. The anxiety and depression were correlated with immune and taste, but it considered as an outcome variable not a physiological marker. Conclusion: Catecholamine and cortisol reflect anxiety and depression state. Our findings suggest that further researches are needed to distinguish between markers and outcomes of depression and anxiety using physiological markers.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.605-611
• /
• 2012

The purpose of this study is to analyze psychological and physiological effects accordance with viewing and walking in the forest and urban area. In the result of measurement of physiological reactions in nervous system, viewing of the forest had a calming effect on the nervous system by reducing blood pressure and heart rate. The other hand, viewing and walking in the urban area compared to the forest area raised stress by increasing blood pressure and heart rate. In addition, viewing in forest area was effective in stress relief by noticeable reduction of the amylase concentration. In contrast, walking in the urban area was also confirmed an increase of stress by increasing the concentration of the amylase. A viewing and walking in forest area was effective in alleviating depressed on anxiety, anger, fatigue and confusion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.171-175
• /
• 2004

A tactile stimulator array using stacked PZT is fabricated and evaluated in this paper. The purpose of this research is the development of a tactile stimulator to represent the obstacle information for the visually disabled. As a first step of this research, we investigate the physiological characteristics of tactile stimuli and design a tactile stimulator based on the investigated results. Also we evaluated a fabricated tactile stimulator. The prototype of tactile stimulator which has 2x2 tactor elements with 3mm spacing is fabricated using stacked PZT actuator. In order to evaluate the characteristics of this tactile stimulator, physiological experiments are carried out. In the experiment, the threshold of tactile stimulus intensity within a frequency range of 5-500Hz and at various stimulus amplitudes are investigated. According to the obtained experimental result, the input signal of tactile stimulator for the transfer of obstacle information is determined. Also physiological experiments of multi-stimuli recognition such as shift and rotation are carried out.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.113-116
• /
• 2000

In this paper presents the portable wireless ECG data detection and diagnosis system based on discreet wavelet transform. An algorithm based on wavelet transform suitable for real time implementation has been developed in order to detect ECG characteristics. In particular, QRS complex, S and T waves may be distinguished form noise, baseline drift or artifacts. Proposed telemetry system that a transmitting media using radio frequency(RF) for the middle range measurement of the physiological signals and receiving media using optical for electromagnetic interference problem. A standard hi-directional serial communication interface between the telemetry system and a personal computer or laptop, allows read-time controlling, diagnosing and monitoring of system. A portable telemetry system within a size. of 65${\times}$125${\times}$45mm consists of three parts: a digital signal processing part for physiological signal detect or diagnose, RF transmitter for data transfer and a optical receiver for command receive. Advantages of proposed telemetry system is wireless middle range(50m) FM transmission, reduce electromagnetic interference to a minimum. which enables a comfortable diagnosis system at home.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.3
• /
• pp.595-604
• /
• 2003

We study on the HYUN-GOG's main principles of Differentiation of Syndromes. HYUN-GOG insisted upon the main principles of Differentiation of Syndromes based on the individual-physiology. The system of Differentiation of Syndromes was composed of the Korean oriental medicine's physiological system. The main principles of Differentiation of Syndromes was mutually explained for the standpoint of eight principal syndromes(differentiation of pathological conditions in accordance with the eight principal syndromes) and the system of Syndrome-complexes based on the physiological system. BON-HER(original deficiency-syndrome), BON-HAN(original cold excess-syndrome), BON-YEOL(original heat excess-syndrome), the three representative syndrome-complexes is previously carried out the details of Differentiation of Syndromes. And the oriental medicine history was rearranged centering around the theory of Differentiation of Syndromes by HYUN-GOG. The theory of Syndrome-complexes was closely connected with prescription by the presentation of the basic organical prescription for the three representative syndrome-complexes.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.147-154
• /
• 1992

This paper describes the design of implantable 8-channel telemetering system to get physiological signals. The internal circuits of this system are designed not only to achieve as small size and low power dissipation as possible, but also to enable continuous measurement of physiological signals. Its main functions are to enable continuous measurement of physiological signals and to accomplish on-off power switching of an implantable battery by receiving appropriate command signals from an external circuit. To integrate implantable biotelemetry system, we performed layout of internal system using Lambda based $2{\mu}m$ n-well design rules. This system, used together with appropriate sensors, is expected to be capable of measuring and transmitting such significant parameters as pressure, pH, and temperature.