• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.2
• /
• pp.241-249
• /
• 1998

Somatotypes in the lower torso and legs of adult females were classified and discriminated. Then their distribution according to the age groups was studied. The subjects were 343 females of 18 to 49 year-old. 36 anthropometric and 21 photographic measurements were taken to each subject. The results were as follows: 1. The somatotypes in the lower torso and legs were classified into 4 types and their differences were shown by analysing factor scores and anthropometric values according to each somatotype. 2. The shape characteristic of tile classified somatotypes was represented by the rating scale of Heath-Carter. 3. The lateral silhouettes of 4 types were compared with balanced type which is type 3 in this study. 4. Individual somatotype in the lower torso and legs could be discriminated from the measured anthropometric data without modifying the data. Anthropometric data, which are needed for discriminating individual somatotype, are waist circumference, posterior waist height, and hip circumference. 5. The distribution of the somatotypes in each age group showed that the dominant somatotype of each age group was different and any somatotype was shown in a specified age group but rarely in other age group.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.27-36
• /
• 2007

The purpose of this study was to investigate the effect of the upper body in order to increase a propulsive force in the old's walking. The subjects were each 10 males, the latter term of the aged and former term of the aged. There were three walking speeds of slow(about 5km/h), medium(about 6km/h), and maximum speed(about 7km/h). The subjects walking 11m were filmed the 5m section (from 3m to 8m) by 2-video cameras using three dimensional cinematography. And we computed different mechanical quantities and especially computed the relative momentum in order to achieve this study's aim. In this study, we was able to acquire some knowledge. The step length and step frequency increased in proportion to the walking speed, and the faster walking speed, the shorter ratio of supporting time( both legs supporting time/one step length time). When it was one leg support phase, the torso was indicated to generate the momentum in order to produce the propulsive force of walking. The upper and lower body had a cooperative relation for walking such as keeping step rate with the arms to legs and maintaining the body balance. The opposition phase for upward-and-downward direction of the torso and arms in walking was functioned to prevent the increase rapidly toward vertical direction of the center of gravity. The arms had contributed to coordinate the tempo of legs and the posture maintenance of the upper body. And by absorbing the relative momentum from the upper torso with arms to the lower torso, it had the rhythmical movement on upward-and-downward direction reducing the vertical reaction force. On account of the relations of absorption and generation of the propulsive force and the production of vertical impulse in the lower torso when walking by maximum speed, it was showed that the function of lower torso was come up as important problem for the mechanical posture stability and propulsive force coordination.

• Proceedings of the ESK Conference
• /
• 1996.04a
• /
• pp.201-211
• /
• 1996

This study was carried out on 132 obese women who satisfied both of the conditions for obesity : over 1.6 in Roher index and over 90cm in bust girth. The purpose of the study was to classify body shape of obese women and find out their respective characteristics. 1. The characteristics on shape of body measurements are the front of waist height was higer than the back of waist height due to the obesity in abdominal region and the front of the abodominal depthe was high indicating the protruding of the abdominal region. 2. Characteristics of different obese body types 1) In the study of total body type, 5 factors were found as a result of factor analsis and body types were classified 4 types (type 1: short upper torso and obese arms and legs, type 2: Long and thick torso, type 3: the most obese torso, arms and legs, type 4: less obese torso according to the cluster analysis. 2) The torso body types were coassified 2 groups (type 1: less obese than average body type, type 2: large in all girth, depth and breadth according) to the different body parts such as back lengh, bust girth, hip girth and acromion to acromion breadth. 3) The lower body types were classified 2 groups (type 1: short legs, less the depth and breadth, type 2: large in all lower body measurenents) according to back of waist height, waist girth and hip girth.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.4
• /
• pp.57-72
• /
• 2022

This study categorized and analyzed the body types of adult women in their 20s and 30s using 3D human measurement data from the 8th Size Korea, and intended to construct body shape and dimension data necessary for modeling Korean standard avatars. Data analysis considered data from 1302 adult women in their 20s and 30s, and a total of 49 index values, drop values, and angle items were subjected to factor analysis and one-way ANOVA to categorize the body type, and Duncan test to post-verify significant differences by type. As a result of conducting factor analysis, 13 factors were extracted and were categorized into 4 body types. Type 1 is short in the upper torso, long in the lower torso, long in the arms and legs, and has a upright body shape and sagging shoulder. Type 2 is short in the torso, arms and legs, and has large torso flexion and lower body circumference. Type 3 has abdominal obesity with small torso flexion and lower body circumference. Type 4 is a small body bending forward type. For the distribution of body types by age among those in their 20s and 30s, the highest appearance rate was Type 1 and was therefore selected as the represntative body type. The body type information of this study will be used as basic data for developing standard avatars.

• The Journal of Korean Physical Therapy
• /
• v.27 no.4
• /
• pp.196-200
• /
• 2015

Purpose: The purpose of this study was to examine the muscle activity of the trunk muscles during balance exercises on a stable and unstable surface in patients with stroke. Methods: Thirteen subjects (8 males, 5 females) with stroke were enrolled in the study. Muscle activity was recorded using surface EMG electrodes from the affected side of the erector spinae, external oblique, and internal oblique muscles. The exercise was performed under three conditions. For the first condition for balance exercise, subjects were instructed to sit on an exercise mat with legs extended. The second condition was to sit with legs extended, with a balance pad under their buttocks. The third condition was to sit with legs extended, have a balance pad under the buttocks and a balance cushion under the lower legs. Results: This study showed significant differences in EMG activities during both arm lifting exercise and weight shifting exercise between conditions. This study showed that the EMG activities of the erector spinae, external oblique, and internal oblique muscles were significantly higher when the trunk exercise was performed using the balance pad with balance ball than when using the stable surface. Conclusion: In conclusion, performing balance exercises using an unstable surface is a useful method for facilitating trunk-muscle strength and hence trunk stability.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.437-447
• /
• 2011

In this study, the lower limbs joints were analyzed for features based on the biomechanical characteristics of landing techniques according to height and landing on the ground type (flats and downhill). In order to achieve the objectives of the study, changes were analyzed in detail contents such as the height and form of the first landing on the ground at different angles of joints, torso and legs, torso and legs of the difference in the range of angular motion of the joint, the maximum angular difference between joints, the lower limbs joints difference between the maximum moment and the difference between COM changes. The subjects in this study do not last six months did not experience joint injuries 10 males in 20 aged were tested. Experimental tools to analyze were the recording and video equipment. Samsung's SCH-650A model camera was used six units, and the 2 GRF-based AMTI were used BP400800 model. 6-unit-camera synchronized with LED (photo cell) and Line Lock system were used. the output from the camera and the ground reaction force based on the data to synchronize A/D Syc. box was used. To calculate the coordinates of three-dimensional space, $1m{\times}3m{\times}2m$ (X, Y, Z axis) to the size of the control points attached to the framework of 36 markers were used, and 29 where the body was taken by attaching a marker to the surface. Two kinds of land condition, 40cm and 60cm in height, and ground conditions in the form of two kinds of flat and downhill slopes ($10^{\circ}$) of the landing operation was performed and each subject's 3 mean two-way RM ANOVA in SPSS 18.0 was used and this time, all the significant level was set at a=.05. Consequently, analyzing the landing technique as land form and land on the ground, the changes of external environmental factors, and the lower limbs joints' function in the evaluation were significantly different from the slopes. Landing of the slop plane were more load on the joints than landing of plane. Especially, knee extensor moment compared to the two kinds of landing, slopes plane were approximately two times higher than flat plane, and it was statistical significance. Most of all not so much range of motion and angular velocity of the shock to reduce stress was important. In the further research, front landing as well as various direction of motion of kinetic, kinetic factors and EMG variables on lower limbs joints of the study in terms of injury-prevention-approach is going to be needed.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.103-111
• /
• 2003

The Denavit-Hartenberg symbolic notation provides the framework for the convenient and systematic method for the robot manipulator kinematics, but is limited its use to the lower pair mechanism or to the single loop mechanisms. The Sheth-Uicker notation is its revised and generalized version to be extended fur the entire domain of the link mechanism including the higher pairs. This paper proposes the method that uses the Sheth-Uicker notation fur the robot kinematics modeling. It uses the instantly coincident coordinate system and the closed loop chain fur the coordinate transformation. It enables us to model the velocity kinematics of the robot that has the complex structures such as the ternary links and the wheels in a systematic and rational way. As an implementation of the proposed method, the Jacobian matrices were obtained for not only the robot with two legs and a torso, but a manipulator on a mobile platform.

• Proceedings of the ESK Conference
• /
• 1994.04a
• /
• pp.136-144
• /
• 1994

In this study, the human gait trajectories during normal walking were synthesized using the inverse kinematics and optimization techniques. The synthesis based on a lower extremity model consisting of a torso and two legs. Each leg has three segments: thigh, shank, foot, and is assumed to move with six degrees-of-freedom. In order to synthesize trajectiories of this redundant system, the sum of angular displacements of articulating joints was selected as an objective function to be minimized. The proposed algorithm in this study is very useful for the analysis of human gait. For the gait analysis, the trajectories of four points in each leg should be measured. However, by using the algorithm, measuring the trajectories of two points is sufficient, and thus the experimental set-up can be simplified. The predicted joint trajectories showed a good agreement with those obtained from the experiment. The statistical analysis and graphic simula- tions are also presented.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.73-87
• /
• 2018

As men in their 30s are spending more money on clothing, it is becoming increasingly important to first conduct an anthropometric study and then develop garment patterns accommodating the changes found in body sizes and types of men in their 30s, in order to effectively address their fit dissatisfaction. Thus this study aims to explore changes in upper body sizes and body types of men in their 30s, which provide basic measurements for designing major garment items including jackets and shirts. To this purpose, key anthropometric dimensions of the upper body of men in their 30s, taken from the 6th (2015) and 7th (2016) surveys conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major upper body sizes to track changes with measuring time. Factor and cluster analyses were used to classify body types. By comparing the two surveys, it was found that the overall body sizes of men in their 30s were increasing in height-related items, circumference, thickness, and width, -as well as body weight and BMIs. Upper body height-related items, in particular, showed a higher average value in the 6th survey than in the 7th, indicating that the overall body types of men are becoming "westernized" with longer legs and shorter torso. Finally, five factors were derived to determine the typical upper body types of men in their 30s and the body types were classified into three categories according to the cluster analysis. First, those with a relatively small build with short stature and torso. Second, those with the highest stature and vertical dimension with the smallest torso volume and least body fatness. Third, those with the biggest torso volume and most body fatness with bigger width between armpits and shoulders. The distributional pattern analysis showed that men in their 30s tend to have increasingly higher stature but lower body weight and BMIs than in the past, implying that their body types are becoming close to those of men in their 20s.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.2
• /
• pp.37-43
• /
• 2021

Background: The purpose of this study is to compare and analysis the changes in strength and endurance of the knee extensor muscles after Anterior cruciate ligament reconstruction. Methods: Twelve male subjects with ligament injury were seated on Biodex and the hip joint was flexed at 110°, and torso, lower extremities, and legs were fixed using Velcro. The resistance device was placed at a point 3cm above the ankle, and measurements were taken before and a surgery at 60°/sec and 180°/sec when the knee was maximally extended. The postures ingeniously combine forward-bending poses countered with backward-bending ones. Results: There was no significant difference in the comparison of muscle strength of 60°/sec and 180°/sec before surgery. But there was a significant difference after surgery. There was significant difference in muscle endurance both before and after surgery. There was a significant difference in the pre- and post- operative comparison values of muscle strength and endurance in isokinetic movements at 60°/sec and 180°/sec during knee extension on the injured side. Conclusion: For cruciate ligament tears, Orthopedic reconstruction is recommended. Correct alignment of the knee ligament after surgery can enhance the strength and endurance of the quadriceps femoris during knee extension rejuvenated.