• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.194-199
• /
• 2003

The traction drive system for the urban transit Rubber-tire system is described in this paper. To control the magnitude and frequency of the output voltage of induction motor transiently, the vector control strategy is generally used. But in case of the traction drive system for the railway vehicle, it is difficult to use the vector control caused by the one-pulse mode in the high speed region. Therefore, this paper proposes the control strategy combined the vector control in the low speed region and the slip frequency control in the high speed region. And also, the overmodulation PWM method is discussed to make the change to the one-pulse mode softly. The performance of the Proposed traction drive system is verified by the MATLAB simulation results.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.597-601
• /
• 2005

Korea Railroad Research Institute(KRRI) developed the Driverless Rubber Tired Korea-AGT(Model: K-AGT) from 1999 to 2004. We have finished the safety and performance tests of K-AGT. Data obtained from this testing can be used to evaluate the growth of reliability. The most widely used traditional growth tracking model is included as IEC International standard. With the tracking model all corrective actions are incorporated during test, called test-fix-test. In the test-fix-test strategy problem modes are found during testing and corrective actions for these problems are incorporated during testing. In this paper, we demonstrated reliability analysis using growth model of driverless rubber tired K-AGT system to prove reliability of development system. Therefore, we introduce the well-known NHPP model and analyze a reliability growth using ReliaSoft's RGA software.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.77-86
• /
• 2005

본 논문은 경전철 급전시스템을 위한 직류보호제어장치의 개발 및 적용에 관한 것이다. 이를 위하여 직류급전계통의 단락특성을 이론과 실측자료를 이용하여 분석하였으며, 사고전류를 검출하는 기법의 개선안을 제시하여 직류 보호계전장치를 개발하였다 특히 계전기능 중 가장 중요한 고장선택계전기(50F)의 계전알고리즘을 개선하여 개발하였고, 이를 경북 경산 경전철 시험선에 설치하여 운전 중이다. 직류 보호계전기를 현장에 적용하기 위하여 그동안 불분명하고 명확하지 않았던 규정 및 규격을 개발과정에서 명확하게 정리하였다. 또한 특성시험과 EMC시험 규정 중 일부항목에 대해 시험방법이 제정되어있지 않아 IEC 규정의 분석을 통하여 객관적이고 타당한 시험회로, 방법 및 평가방법을 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1197-1204
• /
• 2004

The metropolitan cities and operation companies of urban transit railway are driving to construct the LRT(light rail transit) system because of the advantage of construction cost and environmental serviceability. This study suggests the optimal design method of steel box girder considering dynamic characteristics of LRT with rubber wheel. The behavior and design constraints are formulated based on the structural design criteria for LRT. Genetic algorithm is applied to the minimum weight design of structural system. A typical example is solved to illustrate the applicability of the proposed minimization algorithm. From the results of application example, the optimum design of steel box girder is successfully accomplished. Therefore, this system can act as a consultant to assist novice designers in the design of steel box girder for LRT with rubber wheel.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.453-458
• /
• 2001

LRT (Light Rail Transit) is one of the transport modes to reduce heavy traffic in big cities and intercity. LRT line is considered to be easily linked with other transport system. The importance of new LRT lines has recently emerged as the problems solution in Korea. Thus, in this study, the turnout for AGT (Automated Guideway Transit) by computer system has been developed. And Guideway for AGT has also been developed for installation on the LRT line as well. In future, if the results of the feasibility study show the new LRT line project is viable, Kangwon Railtech shall propose design for LRT turnout, development, standardized design for guideway, and construction scheme

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.799-804
• /
• 2005

In this work, the characteristics of train performance of Korean rubber-tired AGT system(K-AGT) are evaluated by using TPS(Train Performance Simulation) and these results are compared to those of other LRT(Light Rail Transit) systems. The performance characteristics of K-AGT was analyzed by comparing the scheduled speed and the energy consumption in case of station interval change and rail track condition change in, the scheduled construction line. In the scheduled construction line, scheduled speed of K-AGT was no difference with other systems and energy consumption was less than other LRT's. In case station intervals are increased, scheduled speed of K-AGT shows similar increasing rate and in curved and graded track conditions K-AGT has no difference in scheduled speed with other systems. As a simulation result by track condition change, when the track which is smaller than curved line of 250m dominates more than $50\%$ in whole track, K-AGT is similar to other systems to the point of scheduled speed and there is advantage in energy consumption.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.117-124
• /
• 2012

There have been recently introduced new types of urban metro vehicles called LRT (Light Rail Transit) running on elevated guideway such as Uijeongbu VAL(which stands for V$\acute{e}$hicule Automatique L$\acute{e}$ger: Automatic Light Rail Vehicle) system, Yong-In LIM(Linear Induction Motor) system, Incheon international airport MAGLEV(Magnetic Levitated Vehicle) system and Daegu monorail system. Most of accidents by the vehicles are bound to happen on elevated guideway. Therefore, it is of vital importance to analyze hazards related to vehicles running on elevated guideway and study emergency evacuation scenarios applicable in case of accidents on elevated guideway so as to secure the safety of the new types of urban metro vehicles. In this study, FTA(Fault Tree Analysis) model was developed to identify all possible hazards, and all possible evacuation scenarios were studied. It was also confirmed that each hazard can be corresponded to one or more evacuation scenarios. This result shows that passengers can be evacuated according to one of the scenarios identified in this study in case of an accident of "Train Stranded on Elevated Guideway".

• 대한교통학회지
• /
• 제12권3호
• /
• pp.29-47
• /
• 1994

Although subway system continues to be the backbone of transportation systems in a city like Seoul, there will still be areas across the city where subway services are not avaliable. Interest has steadily grown to fill this missing routes in overall urban transportation system. Light Rail Transit (L.R.T) system has been recently thought to be an appropriate mode of transportation by businessmen, professionals and transportation industry. In this regards, the purpose of this study is to explore whether L.R.T can be a feasible form of urban rail mode in the context of Seoul. First, the study develops the mathematical models to derive optimum route networks and stations. Integer Programming is employed to determine whether alternative routes are financially viable from the viewpoint of revenue maximization principles. Second, mathematical models developed are applied to Yoido area in order to examine the validity of model structures. The models constructed turns out be capable of handling alternative routes and stations. Application of models are successfully carried out to derive financially feasible set of routes and stations.

• 대한교통학회지
• /
• 제24권3호
• /
• pp.197-205
• /
• 2006

본 연구에서는 복합대중교통체계 하에서 환승을 명확하게 반영하면서 신교통수단의 수요를 분석할 수 있는 분석기법을 제안하였다. 제안된 분석방법은 통행특성별로 그룹을 나누어 각 그룹별로 별도의 적합한 교통수요모형을 적용함으로써 좀 더 현실적인 교통수요분석이 가능하도록 하였다. 구체적으로 신교통수단만 이용하는 통행수요(신교통수단 노선구간 내 통행), 신교통수단을 이용하여 출발하거나 도착하는 통행수요(신교통수단 노선구간 내-외부 통행), 신교통수단의 노선을 통과하는 통행수요(신교통수단 노선구간 통과 통행)로 구분하여 통행의 특성별로 적합한 교통수요분석방법을 별도로 적용할 것을 제안하였다. 또한 본 연구에서는 신교통수단 정책과 같이 승용차에서 대중교통으로의 수단 전환이 가능한 정책 분석에서 사업 시행시와 사업 미시행시 간의 수단별 O/D 값에 차이가 있을 때에도 동일한 지표에 의해 일관된 정책평가 결과를 제시할 수 있는 통행시간 편익산출 방법도 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.316-320
• /
• 2008

A light rail transit, using a linear induction motor, is generally composed with reaction plates along railroad track and the three phase primary on the vehicle. This linear induction motor is driven to keep clearance between the primary and the secondary of the ground for preventing any contact. Therefore efficiency and power factor is very low. In addition, the reaction plate installed on the ground throughout entire railway is impossible to keep uniform gap and it may cause system deterioration. In this paper, A rotary-type small-scale model of a linear induction motor for various characteristic analysis is designed. Thrust force, normal force and input current of the model by air-gap variation have been analyzed by using a Finite Element Method (FEM). The effects of air-gap variation on system performance have been considered by analysis results.