Sodium sulfate is commonly added in reactive dyebath in order to increase substantivity of the reactive dye to cellulose fiber by reducing repulsion between anionic dye and fiber. While sodium sulfate is mostly used in solid form, it is inconvenient to dissolve a large amount of powder sodium sulfate. Furthermore, if there is undissolved salt in dyebath it might cause unlevel dyeing. In this study, sodium sulfate in liquid or solid form was used in dyeing of cellulose fabric with reactive dyes of three primary color and the effect of type or amount of sodium sulfate on dyeing and fastness properties was investigated. When the amount of sodium sulfate rose to 30-50 g/l, K/S value of the dyed fabric markedly increased; further rise in sodium sulfate concentration resulted in slow increase in K/S value. For light color, optimum amount was about 30 g/l in solid form and 50-100 g/l in liquid form while, for medium to deep color, it was 50 g/l and 100-150 g/l in solid and liquid form, respectively. When using each optimum amount of salt in solid or liquid form for medium color, shape of dyeing curve as well as exhaustion was similar to each other. On the whole, similar color fastness results were obtained regardless of type or amount of sodium sulfate.
In these days, the rapid development in prediction technology using artificial intelligent is being applied in a variety of engineering fields. Especially, dimensionality reduction technologies such as autoencoder and convolutional neural network have enabled the classification and regression of high-dimensional data. In particular, pixel level prediction technology enables semantic segmentation (fine-grained classification), or physical value prediction for each pixel such as depth or surface normal estimation. In this study, the pressure distribution of the ship's surface was estimated at the pixel level based on the artificial neural network. First, a potential flow analysis was performed on the hull form data generated by transforming the baseline hull form data to construct 429 datasets for learning. Thereafter, a neural network with a U-shape structure was configured to learn the pressure value at the node position of the pretreated hull form. As a result, for the hull form included in training set, it was confirmed that the neural network can make a good prediction for pressure distribution. But in case of container ship, which is not included and have different characteristics, the network couldn't give a reasonable result.
This paper attempted to examine the characteristics of heat of hydration and calorific value of concrete according to the formwork material in Hot weather environment. As a result of the experiment, it was found that there were no problems such as temperature cracking and delay in hydration reaction when a synthetic resin form was used.
Purpose - This study aims to verify whether the effect of tax avoidance on corporate value is non-linear in the Korean financial markets. Design/methodology/approach - This study believes that the cause of the inconsistent empirical analysis results of previous studies that verified the relationship between tax avoidance and firm value may be an error in assuming linearity, and verifies whether a nonlinear relationship exists. The sample company in this study is a December settlement corporation listed on the Korean stock market, and the analysis period is from 2000 to 2021. In the empirical analysis model, Tobin's Q is used as a proxy for corporate value, tax avoidance is used as the main independent variable, and a regression model is designed with corporate size, growth rate, and debt ratio set as control variables. Findings - As a result of the empirical analysis, it can be confirmed that there is an inverted U-shaped nonlinear relationship between tax avoidance and corporate value. In the additional analysis using Ohlson (1995) firm valuation model for the robustness of the results of the empirical analysis, the same nonlinear value relationship between tax avoidance can be confirmed. Research implications or Originality - This study is considered to be meaningful in that it verifies the non-linear relationship of tax avoidance, which has not been attempted in previous studies. The meaning of the inverted U-shaped nonlinear relationship presented in this study is that corporate tax avoidance acts as a factor that increases corporate value up to a certain level, but rather becomes a factor that decreases corporate value when it exceeds a critical point. These results are expected to provide new perspectives and perspectives on tax avoidance to companies belonging to the Korean capital market.
Free-form building is increasing because of request that an order to raise the value and request of the local residents and the government trying to own iconic and beautiful buildings. In addition, the installation and production of free-form concrete segment are now available because of development of construction technology, such as the development of materials and equipment. However, the production of free-form concrete segment requires a lot of time and manpower than shaping. In particular, resources of the mold for the production of free-from segment will be invested excessively because mold can not be recycled. Thus, the problems of increased costs, construction periods and loss of productivity occur. To solve these problems, this study proposes a technique of making the mold of for variable within a short time. Technique proposed in this study can be recycled die and will realize fast and accurate free-form concrete segment.
본 논문에서는 자유 형태 곡면을 설계할 수 있는 효과적인 방법으로 분산 데이터 보간 방법을 제안한다. 데이터 보간 방법은 다양한 물체를 모델링 하는데 필수적인 방법이다. 구조가 복잡한 자유형태곡면을 생성하기 위하여 기존의 방법은 제어 점의 가중치를 계산하여 물체를 나타낼 경우, 물체의 편평한 영역과 날카로운 모서리 부분이 나타나는 문제점이 있었다. 이러한 문제점을 해결하기 위해서 분산 데이터 보간을 이용하여 새로운 근사곡면 생성방법을 제시한다. 이 방법은 주어진 제어 점들과 변환된 물체상의 점에 변화영역에서 최적의 값을 가지는 주요 곡률을 계산하여 B-스플라인 보간 함수를 구하고 이을 이용하여 근사된 자료의 변화량을 계산한다. 또한 최소의 가중치를 분산 데이터 보간에 이용함으로써 보다 자연스러운 자유형태 곡면을 설계하는 방법을 제안한다.
The change of crystalline structure and mechanical properties of i-PP films which had before isothermally annealed at various temperature and times have been studied. The following results were abtain The crystallinity and crystallite size of the samples showed increasing above the annealing temperature of 13$0^{\circ}C$ and these are equilibrated after an annealing time of 30min. When the crystalline form was at annealling condition were below 13$0^{\circ}C$, 2min, subsequently achieving an $\alpha$, $\beta$ mixing form and at 13$0^{\circ}C$, 10min, the crystalline form entered an $\alpha$ form transition. It is achieved a typical $\alpha$ form at 15$0^{\circ}C$. The value of T'm was increasing until 13$0^{\circ}C$ but it was not founded at 15$0^{\circ}C$. The slopes which represented crystalline form in an Avrami plot differed from each other within the range of this experiment.
International Journal of Internet, Broadcasting and Communication
/
제13권2호
/
pp.20-26
/
2021
Considering the role of a financial analyst that directly affects investors as an information mediator, management's decision to disclose to maximize corporate value will have an important impact on investors as well. On the other hand, whether or not managers vary the level of disclosure depending on the corporate form will have great implications for policy authorities. However, there is no domestic research on the relationship between the corporate form and the quality of voluntary disclosure. Our study shows that the corporate form tends to deepen the negative relationship between the proprietary information cost and the quality of disclosure. Examining whether the relationship between proprietary information cost and management disclosure decision making is valid for domestic companies is expected to provide meaningful implications for investors and regulators. Depending on the corporate form, if an entity makes a discriminatory disclosure, the cost of capital will be affected. A more in-depth follow-up study on this should be done.
Examining the relation between market structure and the value of innovation is important for competition and STI policy. If the value is large in a specific industry structure, government may lead the industry to take that form to enhance innovation. Our simple calibration in the case of linear demand and constant MC results in the conclusion that the incentive for R&D in the case of major and minor innovation in Cournot competition is less than that of merger and cooperative R&D. This emphasizes again "necessary evil" as a monopoly for innovation.
본 연구에서는 초기재령에서 고강도콘크리트의 압축강도 발현 특성 검토 및 해석 그리고 콘크리트와 거푸집간의 부착강도 특성을 분석하며, P형 슈미트해머를 이용한 반발도와 압축강도간의 상관관계를 검토하므로서 실무의 고강도콘크리트 측면 거푸집 탈형과 연관한 관련규정의 적합성을 재검토하고, 아울러 거푸집제거와 연관한 효율적인 품질관리 방법에 대하여 제안하고자 한다. 연구결과에 따르면, W/B가 증가할수록 응결시간은 감소하는 것으로 나타났으며, 본 연구의 범위에서 로지스틱 모델에 의한 강도증진 해석 결과 압축강도 8MPa를 발휘하는 시간과 적산온도는 17${\~}$20시간, $21{\~}25^{\circ}D{\cdot}D$ 정도로 나타났다. 거푸집과 콘크리트의 부착강도는 종결시점에서 가장 크게 나타났으며 그 이후에는 감소함을 보였고, 거푸집에 부착되어 박리되는 콘크리트의 양은 응결이전에 크게 나타났으며, 그 이후에는 점차적으로 감소하는 경향을 보였다. P형 슈미트해머에 의한 반발도 실험결과 압축강도 발현시점보다 약 2${\~}$3시간 정도 빠르게 측정할 수 있으며, 반발도가 32 이상이면 측면 거푸집을 탈형 할 수 있는 시기로 품질관리가 가능할 것으로 판단되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.