• Korean Journal of Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.113-121
• /
• 2019

The death rate of industrial accidents per 10,000 people in Korea is two to three times higher than that of major countries. Falling accidents at the construction site happened to have caused the most deaths. Analysis of existing research and measures by national institutions showed that the industrial accident management concentrated on falling accidents was insufficient and the seasonal safety management measures were not enough. There is thus the need for research that provides detailed and enough information on falling accidents. This study, therefore, aims to overcome the limitations of existing research and safety management accident response using a methodology that provides the necessary information for the prevention of fall accidents by deriving seasonal crash characteristics of the construction site. In order to provide enough information, 387 cases of seasonal construction site falling were collected, which describes the causal relationship of accidents. Text mining using principal component analysis and cluster analysis was carried out. The analysis showed that: In the spring, snowfall and unreasonable operation of equipment including lifts were the major cause. In summer, most accidents were caused by form, insufficient safety inspection, and installation work. In autumn, weather factors such as wind and typhoon were the cause. In winter, material transportation, exterior wall work, and ignore safety precautions were the cause of the crash.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.330-337
• /
• 2021

3D printing is not only at the fundamental study and small-scale level, but has recently been producing buildings that can be inhabited by people. Buildings require a lot of cost and labor to work on the form work, but if 3D printing is applied to the building, the construction industry is received attention from technologies using 3D printing as it can reduce the construction period and cost. 3D printing technology for buildings can be divided into structural and non-structural materials, of which 3D printing is applied to non-structural materials. Because 3D printing needs to be additive manufacturing, control such as curing speed and workability is needed. Since cement mortar has a large shrinkage due to evaporation of water, cement polymer dispersion is used to improve the hardening speed, workability, and adhesion strength. The addition of polymer dispersion to cement mortar improves the tensile strength and brittleness between the cement hydrate and the polymer film. Cement mortar using polymer materials can be additive manufacturing but it has limited height that can be additive manufacturing due to its high density. When light-weight materials are mixed with polymer cement mortar, the density of polymer cement mortar is lowered and the height of additive manufacturing, so it is essential to use light-weight materials. However, the use of EVA redispersible polymer powder and light-weight materials, additional damage such as cracks in cement mortar can occur at high temperatures such as fires. This study produced a test specimen incorporating light-weight materials and EVA redispersible polymer powder to produce exterior building materials using 3D printing, and examined flame resistance performance through water absorption rate, length change rate, and cone calorimeter test and non-flammable test. From the test result, the test specimen using silica sand and light-weight aggregate showed good flame resistance performance, and if the EVA redispersible polymer powder is applied below 5%, it shows good flame resistance performance.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.33-40
• /
• 2014

This study was carried out to understand the physiological characteristics of early-matured 'Hanareum' (Pyrus pyrifolia Nakai) pears through anatomical structure and fruit characteristics and also the changes according to gibberellin (GA) treatment. The pericarp at full bloom consists of outer epidermis, hypodermis, parenchyma cell, and inner epidermis from the exterior and five types of vascular bundle tissues. Cork cell layer was formed at 70 days after full bloom (DAFB) in non-treated fruits and formed at 60 DAFB in GA treated fruits. Cell division period was from full bloom (FB) to 40 DAFB and then fruit enlargement was accomplished by the cell growth. Comparison of the fruit enlargement and fruit structure development by GA treatment or non-treatment showed that cell division of 'Hanaerum' fruits did not affect the GA treatment but fruit enlargement was affected cell growth. Fruit stalk of GA treatment fruits was larger than non-treated fruits from 40 DAFB which correspond to the period of the stop of cell division and 'Hanareum' was regarded GA treatment expedite of vascular bundle tissue growth and relatively increased nutrient transport to fruit. In addition to, average fruit quality between the non-treatment and GA treatment showed that fruit weight was higher in fruits treated by GA but firmness was lower and probably was effected fruit storing in 'Hanareum' pear.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.51-56
• /
• 2015

It has been used various pad finish materials to enhance the reliability of solder joint and recently Electroless Ni Electroless Pd Immersion Gold (the following : ENEPIG) pad has been used more than others. This study is about reliability according to being used in commercial Electrolytic Ni pad and ENEPIG pad, and was observed behavior of various Cu contents. After reflow, the inter-metallic compound (IMC) between solder and pad is composed of $Cu_6Sn_5$ (Ni substituted) by using EDS, and in case of ENEPIG, between IMC and Ni layer was observed the dark layer ($Ni_3P$ layer). Additional, it could be controlled the thickness of dark layer according to Cu contents. Investigated the different fracture mode between electrolytic Ni and ENEPIG pad after drop shock test, in case of soft Ni, accelerated stress propagated along the interface between $1^{st}$ IMC and $2^{nd}$ IMC, and in case of ENEPIG pad, accelerated stress propagated along the weaken surface such as dark layer. The unstable interface exists through IMC, pad material and solder bulk by the lattice mismatch, so that the thermal and physical stress due to the continuous exterior impact is transferred to the IMC interface. Therefore, it is strongly requested to control solder morphology, IMC shape and thickness to improve the solder reliability.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.829-837
• /
• 2014

The KOMPSAT-3 can acquire panchromatic stereo image with 0.7 m spatial resolution, and provides Rational Polynomial Coefficient (RPC). In order to determine ground coordinate using the provides RPC, which include interior-exterior orientation errors, its adjustment is needed by using the Ground Control Point (GCP). Several thousands of national Unified Control Points (UCPs) are established and overall distributed in the country by the Korean National Geographic Information Institute (NGII). UCPs therefore can be easily searched and downloaded by the national-control-point-record-issues system. This paper introduced the point-extraction method and the distance-bearing method to detect of UCPs. As results, the distance-bearing method was better detected through the experiment. RPC adjustment using this method was compared with that by only one UCP and GCPs using GPS. The proposed method was more accurate than the other method in the horizontal. As demonstrated in this paper, the proposed UCPs detection method could be replaced GPS surveying for RPC adjustment.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.363-372
• /
• 2006

The aim of this study is to shed light on the importance of female drivers, study their characteristics and needs, and create automobile designs in accordance with the study. The power of female consumers is greatly increasing in a modern society, To the extent that women became the core consumers. Companies are now turning their attention to female consumers in order to survive the fierce competition in the saturated markets. Moreover, it is becoming imperative for companies to actively develop products and services in female perspectives to meet the diversified needs of consumers. It is forecasted that vigorous research, analysis and understanding of the unique culture of women will be increasingly important now that women are emerging as core consumers. Only the companies that makes such efforts consistently can dominate the market. The automobile industry is not an exception. The world's major automobile companies including Volvo and Ford Motor Co. are keenly focusing on automobile exterior and interior designs for women. Korean companies are also designing cars that cater to women, starting with Lanos and Juliet of Daewoo Motors in 1998, yet specific and systematic research on the subject has not been made. This study aims to emphasize the power of female users, make a research and analysis on their needs and characteristics, and suggest car interior designs that cater to them.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.141-152
• /
• 1993

This study aims to generate digital elevation model from digital satellite imagery. Digital elevation model is being increasingly used for geo-spatial information system database development and for digital map production. Image matching technique was applied to acquire conjugate image coordinates and the algorithm for digital elevation model generation is presented in this study The exterior orientation parameters of the satellite imagery is determined by bundle adjustment and standard correlation was applied for image matching conjugate of image points. The window as well as the searching area have to be defined in image matching. Different sizes of searching area were tested to study the appropriate size of the searching area. Various coordinate transformation methods were applied to improve the computation speed as well as the geometric accuracy. The results were then statistically analysed after which the searching area is determined with the safety factor. To evaluate the accuracy of digital elevation model, 3-D coordinates were extracted from 1/5000 scale topographic map and this was compared to the digital elevation model generated from satellite imagery. The algorithm for generation of digital elevation model generated from satellite imagery is presented in this study which will prove effective in the database development of geo-spatial information system and in digital elevation modelling of large areas.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.389-394
• /
• 2019

In this study, a functional inorganic insulation as TiO₂ and inorganic wet fly ash were used to evaluate the physical performance and thermal environment of an exterior finish that can improve the thermal environment of a building. The performance evaluation of the finish was based on the KS F 4715 thin coating material and the thermal environment. When TiO₂ was added, the physical performance was lowered at 10% or more, and the inorganic wet-treated fly ash increased the physical performance by 10%. In the thermal environmental evaluation, the surface temperature reduction effect of the inorganic wet-treated fly ash was low, but when used in combination with TiO₂, it was effective to reduce the surface temperature and the internal temperature. As a result, the optimum combination of TiO₂ and inorganic wet-treated fly ash for thermal environment control was found to be optimal when 5% of each mixture was used.

• Journal of Food Hygiene and Safety
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2002

This study was conducted to Provide basic information Promoting egg qualify improvement and hygienic control by grasping of present market egg distribution system and hygienic quality. The eggs of 57 brands collected from the department food stores in Incheon Metropolitan City were examined. Eggs were kept in room temperature in all the market and 70.2% of the brands were marked the expiration date indicating that eggs would be available over 28 days after being laid. Fifty-four % of the market eggs was classified as a special or functional egg. Expiration date and date of laying were common labelling items in all brands. These items were labelled in trade mark sheet or eggs tray. Only 66.6% of the brands had the mark about net quantity of contents. The inspection about the exterior and contents of eggs has results as follows: eggshell contamination of feces and feather-9.5%, abnormal and broken eggshell -3.9%, blood and meat spots in contents -14.7% and watery whites -1.8%. Average of Haugh Unit(HU) was 56.1 and below HU 31 were 18 of 285 eggs(6.3%), in addition, more than one egg detected in 12 brands(21.1%) among 57 brands have inferior quality. Salmonella enteritidis from eggshell and antibodies directed from S. enteritidis in the yolks of eggs available in the market were not detected. Ranges of Total bacterial count (CFU/ml) on eggshell of eggs were < 10~8.2$\times$10$_3$, and isolation ratio of Escherichia coli were 4.7%. Tetracyclines were detected in 1.8% of the eggs(1 of57 brands) by CHARMII. As mentioned above, quality control and improving distribution system were required to facilitate egg consumption and improve public health by complementing labelling items and quality standards.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.663-670
• /
• 2020

In the present study, we assessed the accuracy of aerial triangulation using a UAV (Unmanned Aerial Vehicle) capable of network RTK (Real-Time Kinematic) survey in a disaster situation that may occur in a semi-urban area mixed with buildings. For a reliable survey of check points, they were installed on the roofs of buildings, and static GNSS (Global Navigation Satellite System) survey was conducted for more than four hours. For objective accuracy assessment, coded aerial targets were installed on the check points to be automatically recognized by software. At the instance of image acquisition, the 3D coordinates of the UAV camera were measured using VRS (Virtual Reference Station) method, as a kind of network RTK survey, and the 3-axial angles were achieved using IMU (Inertial Measurement Unit) and gimbal rotation measurement. As a result of estimation and update of the interior and exterior orientation parameters using Agisoft Metashape, the 3D RMSE (Root Mean Square Error) of aerial triangulation ranged from 0.153 m to 0.102 m according to the combination of the image overlap and the angle of the image acquisition. To get higher aerial triangulation accuracy, it was proved to be effective to incorporate oblique images, though it is common to increase the overlap of vertical images. Therefore, to conduct a UAV mapping in an urgent disaster site, it is necessary to acquire oblique images together rather than improving image overlap.